|
Flat fuse holder comes with 12 ga. wire and a 30 amp ATO fuse.
|
11.79 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Replacement relay Mercury/Mariner outboards. 12 Volt, 30 Amp.
|
18.40 |
|
|
Cockpit Marine 52mm (2-1/16") Mechanical Water Pressure Gauge - Black Dial/Bezel
VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.
As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.
Features:
40 PSI Mechanical Pressure Gauge
For outboard engines
12V Illumination bulb
Connection: M4 Stud
Mounting Hardware: Included
Voltage: 12V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
32.00 |
|
|
52MM (2-1/16") OceanLink Transmission Oil Pressure Gauge - 30 Bar/440 PSI - White Dial & Bezel
OceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection. Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.
Interchangeable bezel option.
Features:
AMP Superseal Easylink
270° pointer deflection angle
Reverse polarity protection
Anti-fog double lens
Front & rear protection rating IPX5
Operating temperature range -20 °C / +70 °C
Nominal voltage - 12/24V
Hole diameter - 52MM
In the Box:
Gauge
Bezel
Rubber Seal
Spinlock
Installation Instructions
Safety Instructions
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
57.66 |
|
|
52MM (2-1/16") OceanLink Transmission Oil Pressure Gauge - 30 Bar/440 PSI - Black Dial & Bezel
OceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection. Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.
Interchangeable bezel option.
Features:
AMP Superseal Easylink
270° pointer deflection angle
Reverse polarity protection
Anti-fog double lens
Front & rear protection rating IPX5
Operating temperature range -20 °C / +70 °C
Nominal voltage - 12/24V
Hole diameter - 52MM
In the Box:
Gauge
Bezel
Rubber Seal
Spinlock
Installation Instructions
Safety Instructions
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
57.66 |
|
|
30 AMP Inlet and Female Cord Connector Combo - Grey
The SmartPlug Combo Kit includes both a 30 AMP 125V Male inlet connector and Female Cord End Connector. The Female Cord End Connector is designed to be used with your existing cord. This package offers superior performance and ease of use.
Features:
Eliminates Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand.
Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark.
Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord.
Weather Resistant Seals – Silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration.
Quick and Easy Installation.
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
190.00 |
|
|
Cockpit Marine 85mm (3-3/8") 4 in 1 Gauge - White Dial/Bezel
Displays - Oil Pressure, Water Temp (F°), Fuel Level, Voltmeter
VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.
As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.
Features:
Uses most common marine oil pressure, water temperature and fuel senders
Oil pressure 0 to 80 PSI - 240-33 Ohm 80PSI oil pressure senders
Water Temp. 100 to 250°F - 450-29 Ohm 240F/250F marine temperature senders
Fuel level - E to F - 240-33 Ohm fuel level senders
Voltmeter 8 to 16 VDC
Uses common 3/16"" (4mm) electrical ring terminal connectors
Fits common 3 3/8"" (85mm) dashboard holes
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
79.14 |
|
|
Cockpit Marine 52MM (2-1/16") Mechanical Water Pressure Gauge - White Dial/Chrome Bezel
VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.
As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price and performance ratio.
Features:
For Outboard Engines
Uses Common Ring Terminal Wire Connections
0 - 40 PSI Range
For 12V Electrical Systems
Mounting Hardware Included
Brass Water Line Nipple
12V Illumination Bulb
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
32.00 |
|
|
Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.
The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces!
For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.
SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html
Specials Closeouts Remanufactured Rebates
|
|
|
BF30 30 AMP Female Connector
The 30 AMP 125 V connector has been designed to be used with 3-wires (125 V) in a single connector. This retro-fit connector offers superior performance and ease of use. The SmartPlug connector is designed to use your current cordset. You simply cut off the cord plug on your RV/Boat 30 AMP cord.
The connector has mechanical cord restraint, color coded wire guides, a water resistant cord seal and spring loaded side levers that automatically lock into the slots on the inlet housing.
Features:
Eliminates Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand
Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark.
Multi-Point Locking System – Side clips lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord.
Weatherproof Seals – Multi-fin silicone gaskets installed in the inlet cover and interior of the plug body eliminates moisture penetration.
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
92.08 |
|
|
GP2170-09 SystemPod Pre-Cut for Raymarine a95 / a97 / a98 & 4 Instruments for 12" Wide Guard
Instrument Cut Out Size: 3.6" Hole
NavPod GP2170 Series for 12" Guard, SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards. The single bend AngleGuard for this model is the AG218.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all Gen3 NavPods.
*See Literature tab for an image with dimensions
|
462.53 |
|
|
GP2514 SystemPod Pre-Cut for Raymarine es75/es77/es78 & 1 Instrument for 12" Wide Guard
Instrument Cut Out Size:3.6" Hole
GP2500 Series for 12" Guard, SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
331.62 |
|
|
30 AMP Inlet and Female Cord Connector Combo - Black
The SmartPlug Combo Kit includes both a 30 AMP 125V Male inlet connector and Female Cord End Connector. The Female Cord End Connector is designed to be used with your existing cord. This package offers superior performance and ease of use.
Features:
Eliminates Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand.
Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark.
Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord.
Weather Resistant Seals – Silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration.
Quick and Easy Installation.
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
190.00 |
|
|
30 AMP Inlet and Female Cord Connector Combo - White
The SmartPlug Combo Kit includes both a 30 AMP 125V Male inlet connector and Female Cord End Connector. The Female Cord End Connector is designed to be used with your existing cord. This package offers superior performance and ease of use.
Features:
Eliminates Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand.
Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark.
Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord.
Weather Resistant Seals – Silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration.
Quick and Easy Installation.
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
190.00 |
|