STA-RITE A100FLL 1 1/2HP JET MOTOR

STA-RITE A100DLL 3/4HP JET MOTOR

STA-RITE A100ELL 1HP JET MOTOR

Sta-Rite PNC-10 Shallow Well Jet Pump 1/2HP Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 1/2HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 7GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth

Sta-Rite HMSE-1FL Multi-Stage Jet-Centrifugal Pump 1HP Sta-Rite- Multi-Stage Jet-Centrifugal Pump, Convertible, Cast Iron Construction, 1HP 115/230V Motor, 1-1/4" Suction Port, 1" Drive and Discharge Ports, 30/50PSI Pressure Switch, For Shallow or Deep Wells

Sta-Rite PND-10 Shallow Well Jet Pump 3/4HP Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 3/4HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 10.3GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth

Sta-Rite PWP-01 Shallow Well Jet Pump 3/4HP Sta-Rite Shallow Well Jet Pump, Fiberglass Reinforced Thermoplastic Construction, 3/4HP 115/230V, 1-1/4”NPT Suction x 1”NPT Discharge Ports, up to 10.3GPM at 40psi, No Pressure Switch, up to 25 Foot Water Depth

STA-RITE 5PLSWE3 JET PUMP

Sta-Rite PP1657 Overhaul Kit Sta-Rite Overhaul Kit for the MS Pump includes the following items, Shaft Key, Shaft Seal, Spring Holder, Gaskets, Impellers, Wear Rings   Sta-Rite, Flotec, and Simer parts are interchangeable. The Brand name does not matter, only the part number must be the same.

Sta-Rite SNC-L Shallow Well Jet Pump 1/2HP 1/2 HP - 115/230 Volt - Shallow Well Jet Pump The ProJet SN Series Pumps provide excellent performance with good pressure for wells to 25 feet deep. Self-priming after the priming chamber has been filled with water. APPLICATIONS Water systems and sprinkling   FEATURES Quality Construction Close grained cast iron body. Drain port provided for easy winterizing. Built-in Jet High strength Lexan nozzle and venturi for maximum resistance to corrosion and abrasion. Clean out plug provided for ease of service. Noryl Impeller Precision-molded for perfect balance ultra-smooth for highest performance and efficiency. Precision Molded Diffuser Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser. Mechanical Shaft Seal Precision lapped and highly polished carbonceramic, stainless steel construction. Internal design guarantees continuous water lubrication. Motor Windings Superior insulation materials protect against excessive moisture and contaminants assure prolonged motor life. Balanced Rotor Die cast under high pressures for uniform performance and greater efficiency, dynamically balanced. Heavy-duty Ball Bearings Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation. Pump and Motor Shaft Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment. Dustproof Cover All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate vital switching components. Pressure Switch Professional quality, allows cut-in adjustments. SPECIFICATIONS Max. Liquid Temperature: 140°F Max. Inlet Pressure: 50 PSI

STA-RITE C20-87 GASKET

STA-RITE C3-155 SEAL PLATE

STA-RITE U9-449 NOZZLE O'RING Flotec, Simer, and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same

STA-RITE 101P1720 IMPELLER NOCCHI

STA-RITE 101P1730 IMPELLER