Sherwood 02075 2075G Graphite Bushing    

Major Rebuild Kit for Sherwood M10261G This kit contains the following items   GY 211P-2 1 SQ-HD-PLUG 1/8-B MS DATA SHEET 1 DATA SHEET SH 02075 1 GRAPHITE BUSHING SH 10077K 1 IMPELLER KIT SH 10093 1 KEY-WOODRUFF SH 10195 1 SCREW SH 10279 1 COVER SH 10285 1 CAM SH 10286 1 VELLUMOID 505 FIBRE GASKET SH 10546 1 SEAL/SEAT ASSEMBLY SH 12686 6 SLOTTED MACH SCREW 10-24 SH 1311 2 DOWELL PIN SH 4304 1 SNAP RING SH 4306 1 BALL BEARING       Kits are put together at time of order

Major Rebuild Kit for Sherwood R20G This kit contains the following items   GY 211P-2 1 SQ-HD-PLUG 1/8-B SH 02075 1 GRAPHITE BUSHING SH 04303 1 SNAP RING SH 10077K 1 IMPELLER KIT SH 10093 1 KEY-WOODRUFF SH 10195 1 SCREW SH 10197 1 VELLUMOID 505 FIBRE GASKET SH 10279 1 COVER SH 10285 1 CAM SH 11367 1 SEAL/SEAT ASSEMBLY SH 12686 6 SLOTTED MACH SCREW 10-24 SH 1311 2 DOWELL PIN SH 343 8 LOCKWASHER SH 4304 3 SNAP RING SH 4306 1 BALL BEARING     Kits are put together at time of order

Major Rebuild Kit for Sherwood R60G This kit contains the following items   GY 211P-2 1 SQ-HD-PLUG 1/8-B SH 02075 1 GRAPHITE BUSHING SH 04303 1 SNAP RING SH 10077K 1 IMPELLER KIT SH 10093 1 KEY-WOODRUFF SH 10195 1 SCREW SH 10197 1 VELLUMOID 505 FIBRE GASKET SH 10279 1 COVER SH 10285 1 CAM SH 11367 1 SEAL/SEAT ASSEMBLY SH 12686 6 SLOTTED MACH SCREW 10-24 SH 1311 2 DOWELL PIN SH 343 8 LOCKWASHER SH 4304 3 SNAP RING SH 4306 1 BALL BEARING     Kits are put together at time of order

Sherwood 11519 GRAPHITE BUSHING    

Sherwood 11518 GRAPHITE BUSHING    

Major Rebuild Kit for Sherwood H-70 This kit contains the following items   MS DATA SHEET 1 DATA SHEET SH 10077K 1 IMPELLER KIT SH 10093 1 KEY-WOODRUFF SH 10195 1 SCREW SH 10285 1 CAM SH 11518 1 GRAPHITE BUSHING SH 11628 2 LIP SEAL SH 12863 2 RETAINING RING SH 13293 6 18-8 SS HEX HEAD SCRW WB 30326 1 MOUNTING GASKET SQUARE     Kits are put together at time of order

Major Rebuild Kit for Sherwood H-80 This kit contains the following items   GY 211P-2 1 SQ-HD-PLUG 1/8-B MS DATA SHEET 1 DATA SHEET SH 10077K 1 IMPELLER KIT SH 10093 1 KEY-WOODRUFF SH 10285 1 CAM SH 10286 1 VELLUMOID 505 FIBRE GASKET SH 10514C 2 LIP SEAL SH 10822 1 SCREW 10-24 X 3/8 SH 11519 1 GRAPHITE BUSHING SH 12863 1 RETAINING RING SH 344 6 SCREW 10-24 X 3/8 SS MACHN WB 300253 1 MOUNTING GASKET 202M-3     Kits are put together at time of order

Major Rebuild Kit for Sherwood M-5 This kit contains the following items GY 211P-2 1 SQ-HD-PLUG 1/8-B MS DATA SHEET 1 DATA SHEET SH 10077K 1 IMPELLER KIT SH 10093 1 KEY-WOODRUFF SH 10285 1 CAM SH 10286 1 VELLUMOID 505 FIBRE GASKET SH 10514C 2 LIP SEAL SH 10822 1 SCREW 10-24 X 3/8 SH 11519 1 GRAPHITE BUSHING SH 12863 1 RETAINING RING SH 344 6 SCREW 10-24 X 3/8 SS MACHN WB 298485 1 MTG GASKET FOR 202M-15   Kits are put together at time of order

Sherwood 6333 BUSHING    

Sherwood 18887 BUSHING    

Sherwood 10096 COVER ASSEMBLY Pump Cover Assembly Graphite bushing included Replaces Westerbeke 18153 Replaces Universal 299896  

Sherwood GCBN33V BRONZE GEAR PUMP CARBONATOR-MOUNT BRONZE PUMPS (INTERMITTENT DUTY) – Excellent for water-based fluids. Feature 303 stainless steel shafts, carbon graphite bushings, and Buna-N mechanical carbon/ceramic faced seal with a temperature range of -20° to 210° F. Standard pressure relief valves can be ported internally or externally. Wet-end parts are constructed from bronze, brass, stainless steel (302, 303 and/or 18-8), graphite, carbon, and Buna-N.   For use with non-particulate and non-abrasive fluids compatible with pump wet-end construction component materials. • Flows to 4.4 GPM. • Max. RPM: 1725. • Max. PSI: 100. • Standard motors are Dual hertz (50/60), Dual voltage (115/230), RoHS compliant, UL, CSA & CE. • Maximum viscosity of 500 SSU at 1725 RPM (max. input torque of 45 in.-lbs.). • Pumps can operate bi-directionally (reversible). In reverse operation, the pressure relief valve will not function. • Temperature ranges from -20° to 280° F. • Maximum working pressure: 150 PSI.  

Major Rebuild Kit for Sherwood G-1008 This kit contains the following items   ON 132-0346 1 MTG GASKET WTR PUMP SH 06333 1 BUSHING SH 10515C 1 SCREW & WASHER SH 10615K 1 IMPELLER KIT SH 10929 1 CAM SH 12231 1 O'RING SH 12710 6 LOCKWASHER SH 12857 6 SCREW SH 19996 1 CAM-SCREW WASHER SH 21056 4 DOWEL PIN SH 21208 1 OIL SEAL ONAN SH 22117 1 MECH SEAL ASSY ONAN SH 22140 1 COVER LESS BUSHING SH 4258 1 SNAP RING (SMALL) SH 4264 1 WASHER SH 4432 1 KEY SH 5126 1 RETAINING RING SH 6837 1 RET RING SH 8490 1 BALL BEARING     This kit is put together at time of order.

Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow. Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available. All-new sleek, modern design. First all modular system - extremely versatile. Easy to select and install for any radar, dome, light or camera combination. Easy to add accessories. Upgradable for future additions and modifications. Powder coated aluminum construction   Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer. The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."   See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )   Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.   SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686