|
This white Lunch Table or Cutting Board is made from Starboard and meassures 10.625”x20.
|
29.00 |
|
|
SnapIt! Marine P0011 Folding Lunch Table for Pontoon Boats
This Folding Lunch Table for Pontoon Boats measures 21”x13.5”. Lunch table mounts permanently to 1 ¼” square rail commonly found on pontoon boats. Self supporting it folds down and out of the way when not needed.
No drilling required. All mounting hardware included. Color: White.
Custom made at time of order, none returnable.
|
169.00 |
|
|
Cutting Board
Convert your Magma T10-312B Fillet table into a serving table by sliding this cutting board directly into the table.
Provides a fresh, clean surface to prepare food or serve appetizers while on board your boat. Or simply use it on its own in the boat or RV galley.
Compatible With:
Magma T10-312B Fillet table.
Features:
FDA Approved and safe to use for food preparation
Long-lasting and resists damage to the sun
Will not crack, peel or absorb mildew or bacteria
Technical Specifications:
Material - Compression molded high-density polyethylene
Mount Application - Single and Dual mount
Dimensions (L x W x H) - 18.75" x 12.25" x .8" (47.6 x 31.1 x 2 cm)
Weight - 3.7 lbs (1.67 kg)
In the Box:
Cutting board
Instruction manual
*Sold as an Individual
|
65.99 |
|
|
All the convenience and features of the standard SnapIt! large cockpit table plus the added benefit of built in wine glass holders. Enjoy your favorite beverage with your meal hands and spill free!
The support arms securely support the table without the use of a leg, while allowing it to be mounted at a convenient height from the cockpit floor. Use that bungee cord somewhere else! This table folds down and snaps securely in the closed position! Installs in minutes. NO drilling! Comes complete and ready for installation.
W 17 1/2 “ x L 24”
|
250.00 |
|
|
All the convenience and features of the standard SnapIt! small cockpit table plus the added benefit of built in wine glass holders. Enjoy your favorite beverage with your meal hands and spill free!
Hundreds of customers are the singing the praises of this innovative table. The support arms securely support the table without the use of a leg, while allowing it to be mounted at a convenient height from the cockpit floor. Use that bungee cord somewhere else! This table folds down and snaps securely in the closed position! Installs in minutes. NO drilling! Comes complete and ready for installation.
W 14 1/2 “ x L 22”
|
185.00 |
|
|
Serving Shelf with Removable Cutting Board for 9" x 18" Grills
Enhance your grilling experience while increasing your work area with a detachable serving shelf.
This 18-8 mirror polished marine grade Stainless Steel serving shelf includes a removable cutting board. The board is manufactured using a high density polyethylene material which is FDA approved, UV stabilized and will not crack, mold, mildew, or retain any unwanted odors. Cutting board is also replaceable.
The shelf installs instantly making clean up and storage a breeze. Conveniently stores inside of your grill when not in use.
Compatible With:
Rectangular Grills w/ 9" x 18" Grilling Surface or Larger
Technical Specifications:
Material - Mirror Polished 18-8 Stainless Steel
Dimensions (L x W x H) - 17-1/4" x 8-3/16" x 1-7/16" (43.87 x 20.87 x 3.61 cm)
Weight - 3.25 lb (1.48 kg)
*Sold as an Individual
|
57.37 |
|
|
Serving Shelf with Removable Cutting Board for 9" x 12" Grills
Enhance your grilling experience while increasing your work area with a detachable serving shelf.
This 18-8 mirror polished marine grade Stainless Steel serving shelf includes a removable cutting board. The board is manufactured using a high density polyethylene material which is FDA approved, UV stabilized and will not crack, mold, mildew, or retain any unwanted odors. Cutting board is also replaceable.
The shelf installs instantly making clean up and storage a breeze. Conveniently stores inside of your grill when not in use.
Compatible With:
Rectangular Grills w/ 9" x 12" Grilling Surface or Larger
Technical Specifications:
Material - Mirror Polished 18-8 Stainless Steel
Dimensions (L x W x H) - 12-1/4" x 8-3/16" x 1-7/16" (31.2 x 20.87 x 3.61 cm)
Weight - 2.17 lb (.98 kg)
*Sold as an Individual
|
42.53 |
|
|
Stowaway Folding Cutting Board with Built-In Knife Sharpener - Teal
The Stowaway folding cutting board is designed to easily fold, lock, and stow anywhere. Fits easily into kitchen drawers, boat boxes, tackle bags, and travel packs. When unfolded, it locks together to match the feel of a 1-piece design. Features non-slip rubber feet to grip any surface and a built-in knife sharpener so you’re never left with a dull blade.
Toadfish Model Number: TFSTOWCUTBOARD-TEAL
Features:
Magnetic closure
Built-in 2-stage knife sharpener - includes a carbide section for setting a sharp edge on dull blades and a ceramic section to hone and finish the edge finely
Anti-skid bottom
Made of solid, non-porous, high-density polyethylene material for safe food handling
Patented hinged fold-up design
Dishwasher safe
Standard Size Details:
Unfolded Dimensions (inch): 12’’ x 16’’
Folded Dimensions (inch): 3’’x 16’’ x 1.5 ft.
Durable & Portable
Designed to quickly fold, lock, and store anywhere, the Stowaway Folding Cutting Board is your go-to kitchen item no matter where the adventure takes you. Fits into kitchen drawers, boat boxes, tackle bags, and more. Features built-in knife sharpener - no more dull blades!
|
29.88 |
|
|
XL Stowaway Folding Cutting Board with Built-In Knife Sharpener - Teal
The Stowaway folding cutting board is designed to easily fold, lock, and stow anywhere. Fits easily into kitchen drawers, boat boxes, tackle bags, and travel packs. When unfolded, it locks together to match the feel of a 1-piece design. Features non-slip rubber feet to grip any surface and a built-in knife sharpener so you’re never left with a dull blade.
Toadfish Model Number: TFSTOWCUTBOARD-XL-TEAL
Features:
Magnetic closure
Built-in 2-stage knife sharpener - includes a carbide section for setting a sharp edge on dull blades and a ceramic section to hone and finish the edge finely
Anti-skid bottom
Made of solid, non-porous, high-density polyethylene material for safe food handling
Patented hinged fold-up design
Dishwasher safe
XL Size Details:
Unfolded Dimensions (inch): 14’’ x 22’’
Folded Dimensions (inch): 3.5’’ x 22’’ x 1.5 ft.
Durable & Portable
Designed to quickly fold, lock, and store anywhere, the Stowaway Folding Cutting Board is your go-to kitchen item no matter where the adventure takes you. Fits into kitchen drawers, boat boxes, tackle bags, and more. Features built-in knife sharpener - no more dull blades!
|
33.44 |
|
|
SnapIt! Marine P003 Flush Mount Pontoon Quad Drink Holder
This Quad Drink Holder is sized to fit can drinks with insulated sleeves and many mugs. The mug opening diameter is 3.625”. Interior Dimension are 3.895x8.12”. Overall Height 3.86”. Overall Width 18.4”. Cutouts on top ring can be useful for hanging sunglasses, etc.
Flush mount unit not suited for use in combination with P0011 tables. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White
|
62.00 |
|
|
SnapIt! Marine P005 Top Mount Pontoon Quad Drink Holder
Quad Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Mug Opening Diameter 3.625”. Interior Dimension 3.895”(3.45” at narrowest point)x8.12”. Overall Height 3. 6”. Overall Width 18.4”. Top mount unit can be used in combination with P0011 tables. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
62.00 |
|
|
Cutting Board Replacement for A10-902
Replacement cutting board for A10-902 Serving Shelf. Made of Polyethylene plastic.
*Sold as an Individual
|
18.16 |
|
|
Teak Fold Down Luncheon Table - Edson 9-1/2" Guard Pipe with 1", 1-1/8", 1-1/4" Diameter Pipe
Edson’s Fold-Down Luncheon Tables are designed to offer a very handy table to fit smaller cockpits and are an ideal cockpit cocktail table. Measuring 13-1/2" x 24" (34.3 x 61 cm) and equipped with fiddle rails on both sides and ends, the Luncheon Table is available in both Teak and White Poly. When not in use, the table folds flat against the guards or can be easily removed from its guard mounted strap by pulling out the hinge pin. Comes complete with all mounting hardware.
Edson Teak Tables
Solid Teak Construction
Easily removable for storage
Installs in minutes
Non-Magnetic Stainless Hardware
No Legs to get in the way!
Quick-Release pin for easy removal
All Fasteners are Stainless and Bunged
Clip holds Table firmly to Pedestal Guard when folded down
Natural Teak, ready for the finish of your choice
Weight 10.10 lbs
**IMPORTANT: If mounting table to an Edson Vision Series NV pedestal with curved front, you must also order the Console Table Bracket Adapter #960-A-3006**
|
905.10 |
|
|
Teak Fold Down Luncheon Table - Edson Vision Series/Console Pedestal
Edson’s Fold-Down Luncheon Tables are designed to offer a very handy table to fit smaller cockpits and are an ideal cockpit cocktail table. Measuring 13-1/2" x 24" (34.3 x 61 cm) and equipped with fiddle rails on both sides and ends, the Luncheon Table is available in both Teak and White Poly. When not in use, the table folds flat against the guards or can be easily removed from its guard mounted strap by pulling out the hinge pin. Comes
complete with all mounting hardware.
Edson Teak Tables
Solid Teak Construction
Easily removable for storage
Installs in minutes
Non-Magnetic Stainless Hardware
No Legs to get in the way!
Quick-Release pin for easy removal
All Fasteners are Stainless and Bunged
Clip holds Table firmly to Pedestal Guard when folded down
Natural Teak, ready for the finish of your choice
|
905.10 |
|
|
Cutting Board Replacement for A10-901
Replacement cutting board for A10-901 Serving Shelf. Made of Polyethylene plastic.
*Sold as an Individual
|
14.86 |
|