Primarily used for fuel tank vent outside of the engine compartment. For pleasure boats only. Temperature range is -5°F to +180°F. Meets SAE J1527 Type B2 standards.

Primarily used for fuel tank vent outside of the engine compartment. For pleasure boats only. Temperature range is -5°F to +180°F. Meets SAE J1527 Type B2 standards.

Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.

Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.

Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.

Resists gasoline/alcohol blended fuel and is fire resistant. Weather/UV resistant NBR/PVC cover, temp range -20°F to 160°F. Primarily used for fuel vent lines (gasoline up to 85% ethanol blended fuel, or diesel fuel). Meets USCG Type A2, SAE J1527 Type A2 and ISO 7840 Type A2 requirements, NMMA/CE Type accepted standards.

TastePURE Heated Drinking Water Hose - 25' - 5/8"ID The core of the Camco TastePURE Heated Drinking Water Hose is made with an NSF 61 certified, drinking water safe hose that is BPA, phthalate and lead free. The TastsePURE Heated Drinking Water Hose won't leach harmful chemicals into your water or leave it tasting like plastic the way standard garden hoses do. It is ideal for RVs, livestock, agriculture, kennels and other industrial, commercial and residential uses. Its energy saving thermostat only heats as needed, saving you money on your electric bill. The fittings are heavy-duty machined and plated for maximum corrosion resistance and the durable exterior jacket protects water hose and electrical components from damage or exposure. CSA Low Lead Content Certified to NSF/ANSI 372. Compliant with all federal and state level Low Lead Laws. Includes female-to-male adapter to allow connection to the water supply on either end of hose, depending on the location of the electrical outlet. Durable exterior jacket protects water hose and electrical components from damage or exposure. Features: Heavy-duty machined and plated fittings for maximum corrosion resistance ID: 5/8 in. Length: 25 ft. Ideal for water line freeze protection down to minus 20°F (minus 28°C) with an energy saving thermostat Operates on 120VAC Made with NSF-61 certified drinking water safe hose

Welded Ring - 8mm(5/16") Thickness - 42.5mm(1-5/8") ID Round Welded Stainless Steel Ring 8mm(5/16") Thickness 42.5mm(1-5/8") Inner Diameter

8" ID x 6' Long Silicone Marine Wet Exhaust & Water Hose - Blue Trident Silicone Marine Wet Exhaust and Water-Coolant Hose is the ultimate in extra thick soft wall silicone quality with very high-temperature performance and extra long service life. Exceeds SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards. #202V Glossy Blue “Very Hi Temp” has 4-6 ply polyester reinforcement and 350°F (177°C) Max. Used worldwide on premium boats, yachts, and special service vessels. It has become the super yacht standard.

Jabsco 93003-8240# Hose 5/8" Id  

Wide Dee Shackle - 3/16" Pin - 1-3/32"L x 25/32"W Features: Slotted pin - 3/16" pin diameter High strength to weight ratio

Split Cotter Ring - 14mm(5/8") ID Suits clevis pins RF260 - RF274 Grade 316 Stainless Steel

Spool Roller 5" - 5/8" ID - Gold TPR with Bushing White Solid Features: Fits standard brackets and shaft sizes Natural rubber 2-7/8" Diameter 4-7/8" Width Gold TPR 5/8" Shaft

1/2" NPT Bronze 90 Degree Pipe to 1/2"-5/8" ID Hose  Features: 90 degree Male NPT x Hose connection C83600 Bronze Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems. Specifications: Thread NPT: 1/2" Hose ID (in): 1/2" or 5/8"

1/2" NPT x 1/2" or 5/8" ID Bronze Pipe to Hose Straight Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems