Use where bends or long lengths are required, such as engine intake, wet exhaust connections, bilge pump intake/discharge, scupper lines, toilet intake/discharge, holding tank vent or pumpout. Black synthetic rubber tube and cover. Reinforced with wire helix imbedded within plies of HD synthetic cord. Resistant to exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Abrasion resistant, odor permeation resistant. Temperature range -20° to +200°F continuous, +250° intermittent. Meets SAE J2006 Type R2 and double ozone resistance requirements.

Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame

Adhesive Lined Heat Shrink Tubing (ALT) - 1/4" x 12" - 10-Pack - Black Package of 10 Black 12"(30.5cm) long sections with a 1/4"(6.4mm) diameter that shrinks to 5/64"(2mm) Wire Range: 16-10 AWG Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adhesive Lined Heat Shrink Tubing (ALT) - 1/4" x 12" - 10-Pack - Red Package of 10 Red 12"(30.5cm) long sections with a 1/4"(6.4mm) diameter that shrinks to 5/64"(2mm) Wire Range: 16-10 AWG Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3/4" x 12" Threaded Aluminum Pipe 12" length of threaded, bright anodized, 3/4" aluminum pipe for antenna standoff. Threaded all the way through with 7/8-14 thread so it can be cut to length.

4" x 12" Limited Space Replacement Blade - Standard Finish 4" x 12' Limited Space Replacement Blade - 11 Gauge Standard Finish WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

4" x 12" Limited Space Replacement Blade - Electro-Polish Finish 4' x 12" Limited Space Replacement Blade - 11 Gauge Electro-Polish Finish WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

3 Blade aluminum propeller for 25-70 horsepower engines with 13 tooth spline and thru hub exhaust. 3-1/4" gear case.

3 Blade aluminum propeller for 35-50 horsepower engines with 13 tooth spline and thru hub exhaust. 3-1/4" Gear Case.

3 Blade aluminum interchangeable hub propeller for 25-75 horsepower engines with thru hub exhaust; 3-1/4" gear case. Category C prop. Requires RBX™ hub kit for installation.

3 Blade stainless propeller for 25-70 horsepower engines with 13 tooth spline and thru hub exhaust. 3-1/4" gear case.

3 Blade stainless propeller for 40, 50HP Johnson 4-stroke and 35-65 horsepower Suzuki. All with 13 tooth spline and thru hub exhaust. 3-1/4" gear case.

Seine Net - 4' x 12' Mesh Purchase your seine net large enough so the net can be rolled up and used by a single angler for smaller waters or it can be unrolled for two anglers to cover wider stretches of water. Features: A reputation for top performance makes Frabill the #1 choice in seine nets; superior quality keeps it that way Frabill’s special poly netting won’t absorb water, dries fast. Unlike brown poly nets, moisture won’t rot Frabill floats Camo black color blends in, won’t spook bait Heavy-duty floats won’t crush or break off Evenly spaced floats and weights, for uniform spread and tracking Does not include net poles Purchase your seine net large enough so the net can be rolled up and used by a single angler for smaller waters or it can be unrolled for two anglers to cover wider stretches of water

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.250" Stud Required: ST125-1420-12SS Clamp Dimensions L/W/D: 0.87" x 0.47" x 0.41" Recommended Clamp Spacing: 3'

Stainless Steel Deck Step 3-1/4" x 8-3/8" Injection Molded Rubber/Stamped 304 Stainless Steel These Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.