Sikasil® N PLUS - Translucent - 3oz Features: Bonds well to most substrates Fungicide additive for mildew resistance Excellent flexibility for dynamic joint movement Extremely long service life All season ease of application WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sikasil® N PLUS - White - 3oz Features: Bonds well to most substrates Fungicide additive for mildew resistance Excellent flexibility for dynamic joint movement Extremely long service life All season ease of application WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sikasil®-N Plus Clear 10oz with Nozzle Sikasil®-N Plus US is a general-purpose, one-component, non-sag, elastomeric, 100% RTV neutral cure silicone sealant. Meets the requirements of ASTM C-920, Type S, Grade NS, Class 25, Use NT, T, M, G, A, O; TT-S-00230C, Type II, Class A; TT-S-001543A, Class A; CAN/CGSB-19.13-M87, AAMA 802.3 Type II, AAMA 803.3, AAMA 805.2, AAMA 808.3 and California Air Resources Board 2003 requirements for Volatile Organic Compound content.  Features: Extremely long service life Excellent flexibility for dynamic joint movement Bonds to most substrates without priming Usage: Window and door fabrication Conventional glazing Back bedding and cap, toe and heel beads Perimeter sealing of windows, doors, and skylights Expansion and control joints HVAC, White goods assembly Kitchen and bath countertops/solid surfaces, Sanitary Seals Marine cabins Truck/trailer/auto/RV Typical Substrates:  Glass, aluminum, tile, fiberglass, plastic, ceramic, masonry, concrete, brick and wood Advantages: Extremely long service life Excellent flexibility for dynamic joint movement Bonds to most substrates without priming Ready to use, no mixing required AAMA Certified component for window backbedding/glazing All season ease of application Fungicide additive for mildew resistance

Sikasil®-N Plus White 10oz with Nozzle Sikasil®-N Plus US is a general-purpose, one-component, non-sag, elastomeric, 100% RTV neutral cure silicone sealant. Meets the requirements of ASTM C-920, Type S, Grade NS, Class 25, Use NT, T, M, G, A, O; TT-S-00230C, Type II, Class A; TT-S-001543A, Class A; CAN/CGSB-19.13-M87, AAMA 802.3 Type II, AAMA 803.3, AAMA 805.2, AAMA 808.3 and California Air Resources Board 2003 requirements for Volatile Organic Compound content.  Features: Extremely long service life Excellent flexibility for dynamic joint movement Bonds to most substrates without priming Usage: Window and door fabrication Conventional glazing Back bedding and cap, toe and heel beads Perimeter sealing of windows, doors, and skylights Expansion and control joints HVAC, White goods assembly Kitchen and bath countertops/solid surfaces, Sanitary Seals Marine cabins Truck/trailer/auto/RV Typical Substrates:  Glass, aluminum, tile, fiberglass, plastic, ceramic, masonry, concrete, brick and wood Advantages: Extremely long service life Excellent flexibility for dynamic joint movement Bonds to most substrates without priming Ready to use, no mixing required AAMA Certified component for window backbedding/glazing All season ease of application Fungicide additive for mildew resistance

Sikaflex® 291 Fast Cure - White - 3oz Tube Sikaflex® 291 is a 1-component, marine grade polyurethane elastomeric adhesive and sealant. Used by many boat builders, its fast cure time makes it ideal for applications where speed is important. Sikaflex® 291 is manufactured in accordance with IOS 9001/14001 quality assurance system and the responsible care program. Features: General purpose polyurethane marine sealant Fast curing Above and below water applications Ideal for sealing thru hull and hardware applications Excellent adhesion to Gelcoat Resists saltwater WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sikaflex® 291 Fast Cure - Black - 3oz Tube  Sikaflex® 291 is a 1-component, marine grade polyurethane elastomeric adhesive and sealant. Used by many boat builders, its fast cure time makes it ideal for applications where speed is important. Sikaflex® 291 is manufactured in accordance with IOS 9001/14001 quality assurance system and the responsible care program. Features: General purpose polyurethane marine sealant Fast curing Above and below water applications Ideal for sealing thru hull and hardware applications Excellent adhesion to Gelcoat Resists saltwater WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aktivator-205 Clear 250ml Bottle Sika® Aktivator-205 is a solvent-based colorless clear adhesion promoter, which reacts with moisture and deposits active groups on the substrate. These groups act as a link between substrates and primers or sealants/adhesives. Sika® Aktivator-205 is designed for the treatment of bond faces prior to the application of Sikaflex® and Sikasil® adhesives and sealants.    Features: Enhanced adhesion on various substrates Short flash-off time Easy to use Transparent Areas of Application: Sika® Aktivator-205 is used to improve adhesion on non-porous substrates such as metals, plastics, ceramic screen prints, and painted surfaces. Seek manufacturer’s advice and perform tests on original substrates before using Sika® Aktivator-205 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow. Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available. All-new sleek, modern design. First all modular system - extremely versatile. Easy to select and install for any radar, dome, light or camera combination. Easy to add accessories. Upgradable for future additions and modifications. Powder coated aluminum construction   Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer. The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."   See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )   Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.   SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686

      Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.     The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces! For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.   SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html     Specials    Closeouts    Remanufactured    Rebates  

Sikaflex® 295 UV - White - 10oz Tube with Nozzle Exterior sealant and direct glazing adhesive for organic glass in Marine applications. Sikaflex®-295 UV is a 1-component polyurethane adhesive of paste-like consistency that cures on exposure to atmospheric moisture. It is suitable for interior and exterior sealing applications and to bond organic glass in the Marine business. Sikaflex®-295 UV meets the requirements set out by the International Maritime Organization (IMO).   Features: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Areas of Application Sikaflex®-295 UV has been specially developed for the marine industry, where it is used to bond and seal plastic glazing materials in boats and ships. Because of its excellent weatherability this product can also be used to seal joints in exposed areas. Suitable substrates are aluminum (bright or anodized), GRP (polyester resin), stainless steel, timber, 2-component coatings, and plastic glazing materials (PC, PMMA). Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-295 UV on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility. Product Benefits: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Approved for the OEM market Wheelmark approved Surface Preparation: Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants. Surface treatment depends on the specific nature of the substrates and is crucial for a long-lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates.  Application: Sikaflex®-295 UV can be processed between 10 °C and 35 °C (climate and product) but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C. Consider that the viscosity will increase at low temperatures. For easy application, condition the adhesive at ambient temperature prior to use. To ensure a uniform thickness of the bonding it is recommended to apply the adhesive in form of a triangular bead. Tooling & Finishing Tooling and finishing must be carried out within the skin time of the product. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to the use.  Removal Uncured Sikaflex®-295 UV can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika® Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on the skin. Overpainting Sikaflex®-295 UV can be painted prior to and after the formation of the skin. If the painting process takes place after the sealant has built a skin, adhesion could be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 prior to the painting process. If the paint requires a baking process (> 80 °C), the best performance is achieved by allowing the sealant to fully cure first. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than that of sealants. This could lead to cracking of the paint in the joint area.

Sikaflex® 295 UV - Black - 10oz Tube with Nozzle Exterior sealant and direct glazing adhesive for organic glass in Marine applications. Sikaflex®-295 UV is a 1-component polyurethane adhesive of paste-like consistency that cures on exposure to atmospheric moisture. It is suitable for interior and exterior sealing applications and to bond organic glass in the Marine business. Sikaflex®-295 UV meets the requirements set out by the International Maritime Organization (IMO).   Features: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Areas of Application Sikaflex®-295 UV has been specially developed for the marine industry, where it is used to bond and seal plastic glazing materials in boats and ships. Because of its excellent weatherability this product can also be used to seal joints in exposed areas. Suitable substrates are aluminum (bright or anodized), GRP (polyester resin), stainless steel, timber, 2-component coatings, and plastic glazing materials (PC, PMMA). Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-295 UV on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility. Product Benefits: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Approved for the OEM market Wheelmark approved Surface Preparation: Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants. Surface treatment depends on the specific nature of the substrates and is crucial for a long-lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates.  Application: Sikaflex®-295 UV can be processed between 10 °C and 35 °C (climate and product) but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C. Consider that the viscosity will increase at low temperatures. For easy application, condition the adhesive at ambient temperature prior to use. To ensure a uniform thickness of the bonding it is recommended to apply the adhesive in form of a triangular bead. Tooling & Finishing Tooling and finishing must be carried out within the skin time of the product. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to the use.  Removal Uncured Sikaflex®-295 UV can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika® Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on the skin. Overpainting Sikaflex®-295 UV can be painted prior to and after the formation of the skin. If the painting process takes place after the sealant has built a skin, adhesion could be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 prior to the painting process. If the paint requires a baking process (> 80 °C), the best performance is achieved by allowing the sealant to fully cure first. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than that of sealants. This could lead to cracking of the paint in the joint area.

Sikaflex® 292i - White - 10oz Tube with Nozzle Sikaflex®-292i is a non-sag 1-component polyurethane adhesive of thixotropic, paste-like consistency which cures on exposure to atmospheric moisture. It exhibits excellent adhesive properties and good mechanical strength. Sikaflex®-292i meets the low spread of flame requirements set out by the International Maritime Organisation (IMO).   Features: Good gap-filling properties Can be painted Bonds well to a wide variety of substrates Areas of Application: Sikaflex®-292i is suitable for structural joints in marine constructions which will be subjected to high dynamic stresses. It is suitable to bond metals, particularly aluminum (including anodized finishes), metal primers and paint coatings (2-component systems), or ceramic materials, plastics such as GRP (unsaturated polyester resin), ABS, etc. Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-292i on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed ensuring adhesion and material compatibility.   Benefits: Good gap-filling properties Can be painted Bonds well to a wide variety of substrates Wheelmark approved Solvent-free and very low VOC Surface Preparation: Surfaces must be clean, dry, and free from grease, oil, and dust. Surface treatment depends on the specific nature of the substrates and is crucial for a long-lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates. Application: Sikaflex®-292i can be processed between 10 °C and 40 °C (climate and product) but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C. Consider that the viscosity will increase at low temperatures. For easy application, condition the adhesive at ambient temperature prior to use. Tooling & Finishing Tooling and finishing must be carried out within the skin time of the sealant. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to the use.  Removal Uncured Sikaflex®-292i can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika® Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on the skin.

Primer-207 - Pigmented, Solvent-Based Primer for Various Substrates Sika® Primer-207 is a solvent-based black primer that reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives. Sika® Primer-207 is specifically formulated for the treatment of bond faces prior to the application of Sika’s 1-component polyurethanes. This primer might provide excellent adhesion without a previous activation step on many substrates. Sika® Primer-207 fluoresces under long-wave UV light for a limited period of time. This feature is used for in-process control. Usage: Sika® Primer-207 is used to improve adhesion on a very broad range of different substrates, such as float glass, ceramic-coated glass, plastics, pre-coatings, painted surfaces, E-coats, and metals. Seek the manufacturer’s advice and perform tests on original substrates before using Sika® Primer-207 on materials prone to stress cracking.  This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.  Application: Shake the Sika® Primer-207 can very thoroughly until the mixing balls rattle freely. Continue shaking for another minute and apply a thin but covering coat with a brush, felt, or foam applicator. Ideal application and surface temperatures are between 15 °C and 25 °C. Sika® Primer-207 has to be applied only once. Care must be taken to ensure that this single application gives adequately dense coverage. Consumption and method of application depend on the specific nature of the substrates. Tightly reseal the container immediately after each use. Features: Enhanced adhesion on a wide variety of substrates Visible under UV light Easy to use

Aktivator-100 Clear 250ml Bottle Transparent solvent-based adhesion promoter for various substrates. Sika® Aktivator-100 is a solvent-based colorless adhesion promoter, which reacts with moisture and deposits active groups on the substrate. These groups act as a link between substrates and primers or sealants/adhesives. Sika® Aktivator-100 is specifically formulated for the treatment of bond faces prior to the application of Sika’s elastic adhesives and sealants.   Features: Easy to use Enhanced adhesion on a wide variety of non-porous substrates Short flash-off time Transparent Usage: Sika® Aktivator-100 is used to improve adhesion on substrates such as float glass, ceramic screenprints, the cut face of old Polyurethane adhesives and paints. After intensive testing, this activator is also suitable to enhance the adhesion of other Sika sealants and adhesives on non-porous substrates. Seek manufacturer’s advice and perform tests on original substrates before using Sika® Aktivator-100 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

Primer-206 G+P Black 250ml Bottle Pigmented, solvent-based primer for various substrates. Sika® Primer-206 G+P is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives. Sika® Primer-206 G+P is specifically formulated for the treatment of bond faces prior to the application of Sika’s 1-component Polyurethanes.   Features: Enhanced adhesion on a wide variety of substrates Easy to apply Usage: Sika® Primer-206 G+P is used to improve adhesion on substrates such as float glass, ceramic-coated glass, pre-coatings, painted surfaces, and some plastics and metals. Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-206 G+P on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.