|
SirenSat Offshore Antenna with 2M Power Cable*
*Requires SirenSat Offshore Subscription (sold separately)
Using the Globalstar Network of Satellites, the SirenSat Offshore Antenna allows users to track their boat, even after it leaves cellular coverage. With Global coverage. boat owners who keep their boats in theft-prone areas, can now easily report the vessel location worldwide. Plus, Global Tracking satisfies most insurance requirement for boats with multiple outboard engines.
Features:
Satellite technology: Global LEO Satellite operation using the Globalstar Simplex Data Network
Checks in every 15-30 minutes
Includes 2M power harness to connect to 12V power supply
Features geo-fencing capability
Global coverage, non-dependent on cellular connection
Works with MTC and Siren 3 Pro
|
311.99 |
|
|
1st Watch Wireless Radar w/o Power Cable
Untether & Explore - Furuno 1st Watch Wireless Radar, that you can access directly from your iOS devices.
Move Around & Explore
With Furuno's 1st Watch Wireless Radar, you can do things previously impossible. You can bring the Radar display whenever you go, even put it on the iPhone in your pocket. Since the display is untethered, you are free to roam the vessel while maintaining full situational awareness of your surroundings. For example, you can bring the Radar display with you when jumping into the cabin quickly to grab fishing gear or other tools needed during your voyage.
Easy To Use At 1st Glance
Plug in the Radar, set up the free app from App Store and you're good to go. With familiar gestures it's a breeze to use; you can even use two iOS devices simultaneously. The app has been created with simplicity and efficiency in mind, providing reliable information that is easily accessible.
Features:
4kW Radar antenna, powerful yet compact in size (same housing as DRS2D)
Wireless LAN, first Radar in the world accessible from your iOS devies
No extra wiring needed except the power source, making installation a breeze
Exceptionally simple setup and intuitive operation with user-friendly and free iOS app
Extremely economical power consumption
Vivid, multi-color Radar target presentation (1/8nm - 24nm)
Simple touch interface with familiar gestures
User selectable range scale from 0.125 to 24 nm
Simultaneously connect and utilize 2 iOS devices, via high-sensitivity wireless signal
Power Cable sold as an accessory. 001-266-010-00
Power Requirements:
12-24 VDC
Only 24W
*Please note: iOS devices and accessories are sold separately and do not come included with this product.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1161.54 |
|
|
External Cellular Antenna with 5M (16') Cable & Mounts for Cortex M1
Extend the range of the remote monitoring by adding an external cellular antenna. The M1 Cortex transponder/hub includes a built-in cellular antenna however to increase the cellular range you can add this external antenna giving the antenna a clear view of the sky. The GPA680 comes with an antenna, 5M (16') cable, and mounts.
|
85.49 |
|
|
AMPS Rugged Mount with Audio/Power Cable
Mount your compatible device on your motorcycle or ATV. Kit includes mount, hardware and a cable with bare power, audio and data wires.
|
95.98 |
|
|
Motorcycle/ATV Mount Kit and AMPS Rugged Mount with Audio/Power Cable
Simply snap your compatible device – in portrait or landscape mode – into the rugged mount* to navigate while on your motorcycle or ATV. Kit includes mount, hardware, AMPS arm/ball socket and cable with bare power, audio and data wires.
*To achieve optimal performance, portrait mode is recommended for Montana® 700i and Montana 750i devices.
|
143.99 |
|
|
AMPS Rugged Mount with Audio/Power Cable for Montana® Series
Take advantage of Montana's versatility. Mount your Montana on your motorcycle or ATV and take it on the road. This kit includes the mount, hardware (AMPS arm/ball socket sold separately) and a cable with bare power/audio/data wires. It also includes anti-glare screen protectors.
Compatible Devices:
Montana® Series
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
62.39 |
|
|
Siren 3 Pro Vessel Management Device
Features:
Providing the ultimate smart boating experience that keeps you connected to your boat 24/7, regardless of boat size, type or use
The Siren 3 Pro provides the modern boating experience by going beyond basic marine GPS, radar & radio solutions to complement your multi-function display (MFD) with Connected Boat® Technology
Together with our easy-to-use App plus global cellular & optional satellite connectivity, our smart boat device connects you to your boat anytime, anywhere
Make your life easier by controlling your boat's lights, A/C & digital switching systems remotely from the palm of your hand
The Siren 3 Pro provides a better boating experience with remote monitoring, helping your boat stay safe, secure & ready to enjoy
Standard Features:
Battery Monitoring (Can monitor up to 2 battery banks, if additional banks are required the Siren Marine Battery Sensor will need to be added.)
GPS Position/Geofence
NMEA 2000
Digital Switching
4G LTE
Features with Add-On Sensors & Accessories:
Engine Metrics
Connected Fluid Tanks
Security/Entry
Bilge
High Water
Shore Power
Temperature
Satellite Compatible
Wireless Sensors 3.0
|
716.23 |
|
|
Remote Cellular & GPS Antenna - Adhesive Mount Puck
Enjoy enhanced location and cellular connectivity reception for your Siren 3 Pro all with one combination antenna.
The Remote GPS & Cell Antenna Adhesive-Mount Puck is easy to mount and will extend the GPS and cellular range capabilities of your Connected Boat® System, strengthening your connection to your boat for the ultimate peace of mind.
Compatible With:
Siren 3 Pro
Technical Specifications:
Cable length - 9.8 ft (3 m)
Dimensions (H x Dia.) - 0.5" x 2.5" (12 x 62.8 mm)
*Sold as an Individual
|
118.55 |
|
|
Remote Cellular & GPS Antenna - Threaded Mount Dome
Enjoy the enhanced location and cellular connectivity reception for your Siren 3 Pro all with one combination antenna.
The Remote GPS & Cell Antenna Threaded-Mount Dome will extend the GPS and cellular range capabilities of your Connected Boat® System strengthening the connection to your boat.
Compatible With:
Siren 3 Pro
Technical Specifications:
Cable Length - 9.8' (3m)
*Sold as an Individual
|
118.55 |
|
|
RayStar 150 GPS Sensor w/Pole Mount
RS150 GPS Sensor
The RS150 GPS is a high performance, 72-channel, remotely mounted GPS sensor for Raymarine navigation systems. The RS150 offers fast 10Hz position updates and enhanced accuracy. The RS150 is also a GNSS receiver and supports the GLONASS global navigation satellite system.
Features:
72-channel GPS receiver
Fast 10Hz position updates
Satellite differential GPS-compatible. Space-Based Augmentation System (SBAS) enabled with WASS, EGNOS, MSAS and GAGAN support
A GNSS receiver with GLONASS compatibility
Low power consumption: 30mA (1 LEN)
SeaTalkng and NMEA2000 compatible (using a device net adapter cable)
Designed for low profile surface mounting or optional pole mounting
Specifications:
Nominal supply voltage: 12V D.C. Powered by N2K bus
Operating voltage range: 8 - 32V DC
Power consumption: 30 mA max (NMEA LEN = 1)
Operating temperature: -13ºF to 131ºF (-25ºC to +55ºC)
Relative humidity: max 93%
Waterproof: IPx6/7
Supported connection protocols: SeaTalkng: NMEA 2000 (certified) (via DeviceNet adaptor)
Sensitivity: High sensitivity - acquisition down to -163dBm
No. of channels: 72
Positioning System: GPS & GLONASS
Satellite Differential Type: WAAS (United States); EGNOS (Europe); MSAS (Japan); GAGAN (India)
Differential acquisition: Automatic
Position accuracy (95%): <15M
Position accuracy with SDGPS (95%): <5M
Speed accuracy (95%): <0.3kt
Time to first fix from cold start: <2 minutes (< 45 seconds typical)
Time to first fix from hot start: < 8 seconds -72 hour hold up battery allows for hot start
Geodetic Datum: WGS84
Pole Mount for RS150 GPS Antenna
Raymarine's Pole Mount specifically for the RS150 GPS Antenna. The RS150 has 72 channels and offers faster 10Hz performance and enhanced accuracy. The RS150 is also a GNSS receiver and supports the GLONASS global navigation satellite system.
|
342.38 |
|
|
SC70 Satellite Compass w/o Cable
The SC70 is the latest satellite compass built on FURUNO’s commercial-grade technology platform. These satellite compasses prove their value by increasing the accuracy of other devices, such as Radar, ARPA, Scanning Sonar, Current Indicator, Chart Plotter, ECDIS and Autopilots. They provide a highly accurate heading input to these other technologies by utilizing the very latest GNSS (Global Navigation Satellite System). This satellite system is comprised of GPS, Galileo and GLONASS to ensure the highest precision and a continuous coverage.
The SC70 provides a variety of data, including GPS Positioning, SOG (Speed Over Ground), COG (Course Over Ground), ROT (Rate Of Turn) and 3-axis speed (bow, stern and longitudinal). All of these data assist with critical maneuvers, such as berthing. The compasses is maintenance free - a great asset for any vessel.
Consists Of:
SC701 - Junction box for SC70/SC130
SC702 - Display unit for SC70/SC130
SC703 - ANT 2GPS/ANG/ACCEL/MGNT SNSR
Note: The SC70 and SC130 are sold without an antenna cable.
Standard Features:
Provides highly accurate heading data of 0.4° for autopilot, Radar, ARPA, Scanning Sonar, Current Indicator, Chart Plotter, ECDIS and Autopilots
Ideal for small to medium boats requiring highly accurate heading
Utilizes GNSS such as GPS, Galileo and GLONASS for high Precision
SBAS compatible (EGNOS,WAAS,MSAS)
Provide precise data for SOG, COG, ROT and L/L
Eliminating the problem of not having enough satellites at hand by using multiple types of satellites
Speed on 3 axis (bow, stern and longitudinal) for safe navigating and berthing
IMO Type-approved as THD, GPS and ROTI. Complying with the IEC, ISO requirements
Easily integrated into the existing shipboard network via Ethernet
Rapid follow-up rate 40°/s (twice the IMO high speed craft requirement, 20°/s)
Maintenance free and no recurring cost as there are no mechanical parts
Super short starting time - 90 seconds
Once the power is on, it takes about 90 seconds to start (the starting time will slightly differ depending on the equipment location)
Easy to retrofit by using existing antenna cabling for SC-50/55/60/110/120. (The LAN_CNV option kit is necessary)
Precision pitch/roll data in Analog and Digital formats for vessel stabilization, Sonar, etc.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
5494.50 |
|
|
Siren Marine's Connected Boat technology is revolutionizing the boat ownership experience by providing boat owners, fleet operators and boat builders with critical information, peace of mind, and a better boating experience.
Track your boat's position, receive alerts when critical events occur, view live video from the boat, access engine metrics, view NMEA information, and control onboard devices remotely.
Specials Closeouts Remanufactured Rebates
|
|
|
Siren Marine's Connected Boat technology is revolutionizing the boat ownership experience by providing boat owners, fleet operators and boat builders with critical information, peace of mind, and a better boating experience.
Track your boat's position, receive alerts when critical events occur, view live video from the boat, access engine metrics, view NMEA information, and control onboard devices remotely.
Specials Closeouts Remanufactured Rebates
|
|
|
Siren Marine Audible Alarm
The Siren Marine audible alarm produces a powerful beeping sound (105 decibels). The alarm can be connected to one of the outputs on the MTC, which will allow it to be turned on and off from the "switching" section of the Siren Marine App. It can also be mapped to specific inputs (such as a motion sensor) in the app and programmed to turn on automatically.
Features:
Automatically adjusts to a supply voltage range of 12-80V
Waterproof housing with epoxy embedded electronics
Wiring is required to any 12V-80V DC power source
Easy-to-install universal mounting bracket with slotted holes
Works with MTC and Siren 3 Pro
Specifications:
Material: Heavy-duty plastic housing
Waterproof: Yes
Voltage: 12V-80V
Power: 10W
Current: 0.5A
Length: 3.9 in (including bracket)
Width: 1.5 in
Height: 2.57 in
Volume: 105 +/- 3dB
|
66.13 |
|
|
544-SSW-RS Single Side Band Antenna w/RUPP Collar - White
** Designed to be used with RUPP Antenna Mounts **
When the range of a VHF radio just won’t do, offshore vessel operators choose Digital Antenna’s high performance Single Side Band antennas for exceptional communication over the entire HF frequency range. Heavy duty construction for use in the roughest seas, Digital Antenna SSB antennas are a popular choice for boaters when durability, performance and great looks are prerequisites. Available in 16’ or 24’ lengths to accommodate even the most pristine of motor yachts.
Features:
Powerful brass radiators
Soldered connections
Centering foam insulator
High gloss urethane finish
Mount: Standard 1”–14 threaded base
RF Termination: 1/4”- 20 stainless steel stud
Cable: Not included
Specifications:
Radiation Pattern: Omni-Directional
Max Input Power: 1000W
Exterior Finish: White, UV stable poly-urethane coating
Ferrule: 316 Stainless Steel
Installation: 1"-14 female threads
Wire (not included): Use 10-12 AWG high voltage insulated wire
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1098.16 |
|