Rust Stopper - 12oz STA-BIL® Rust Stopper is an aerosol spray that delivers a protective coating for exposed metals, preventing rust and corrosion. Untreated and treated metals can rust within weeks of exposure. STA-BIL® Rust Stopper prevents rust and corrosion by protecting metal surfaces with a long-lasting barrier while maintaining joint and pivot points to move freely. Use anywhere metal needs to be protected from rust and corrosion.  Prevents rust and corrosion – Fights the formation of rust and corrosion on exposed metal surfaces  Long Lasting Protection – Leaves a film coating on metal surfaces that is proven to withstand the test of various weather conditions  Water Resistant – Specialized formula prevents normal water erosion and keeps the protected surface from developing water stream markings resulting in uneven corrosion.  Lubricates and Penetrates – Use to lubricate parts and tools to stop squeaks and sticking  Stops Existing Rust – Once rust is present, our innovative formulation stops rust in its tracks while offering a protective coating in its place. DIRECTIONS: Shake Well before using. Apply two to three inches away from the surface (if possible) and swipe back and forth to apply an even coat on the surface of the metal. Removal: High pressure, cold water pressure wash (1,000-3,000 psi) is recommended. A standard, industrial strength pressure washer will suffice. Can also be removed by warm water detergent wash or with a commercial-grade biodegradable cleaner. Features: Prevents rust and corrosion on interior and exterior metal surfaces Corrosion inhibitor with long lasting protection preventing future rust Water resistant formula prevents normal water erosion Lubricates and penetrates to stop squeaks and sticking Stops existing rust in its tracks Made in the U.S.A.

Rust Stopper - 12oz *Case of 6* STA-BIL® Rust Stopper is an aerosol spray that delivers a protective coating for exposed metals, preventing rust and corrosion. Untreated and treated metals can rust within weeks of exposure. STA-BIL® Rust Stopper prevents rust and corrosion by protecting metal surfaces with a long-lasting barrier while maintaining joint and pivot points to move freely. Use anywhere metal needs to be protected from rust and corrosion.  Prevents rust and corrosion – Fights the formation of rust and corrosion on exposed metal surfaces  Long Lasting Protection – Leaves a film coating on metal surfaces that is proven to withstand the test of various weather conditions  Water Resistant – Specialized formula prevents normal water erosion and keeps the protected surface from developing water stream markings resulting in uneven corrosion.  Lubricates and Penetrates – Use to lubricate parts and tools to stop squeaks and sticking  Stops Existing Rust – Once rust is present, our innovative formulation stops rust in its tracks while offering a protective coating in its place. DIRECTIONS: Shake Well before using. Apply two to three inches away from the surface (if possible) and swipe back and forth to apply an even coat on the surface of the metal. Removal: High pressure, cold water pressure wash (1,000-3,000 psi) is recommended. A standard, industrial strength pressure washer will suffice. Can also be removed by warm water detergent wash or with a commercial-grade biodegradable cleaner. Features: Prevents rust and corrosion on interior and exterior metal surfaces Corrosion inhibitor with long lasting protection preventing future rust Water resistant formula prevents normal water erosion Lubricates and penetrates to stop squeaks and sticking Stops existing rust in its tracks Made in the U.S.A.

Fogging Oil - 12oz STA- BIL Fogging Oil is an aerosol propelled oil treatment to protect internal engine components during storage. This fogging oil can be sprayed to coat internal engine components and prevent corrosion. Formulated to displace moisture from metal to protect engine, this product also lubricates the cylinder’s walls, pistons and rings to prevent damage (scuffing) during start-up after prolonged engine storage. It is used in all two and four cycle gasoline engines. The STA-BIL Fogging Oil comes in a convenient 12 ounce aerosol can with nozzle straw to direct oil in tight passages or through spark plug holes in head and cylinder. USAGE DIRECTIONS: Start engine and remove air filter. Spray fogging oil into air intakes of running engine. Shut engine off after 10 seconds. Remove spark plugs. Attach extension tube and spray fogging oil into each cylinder for 3 seconds. Replace spark plugs. Features: STA-BIL Fogging oil coats internal engine components to prevent corrosion Displaces moisture from metal to protect engine Lubricates cylinders to prevent cylinder damage (scuffing) at start up For all 2-cycle and 4-cycle gasoline engines, including outboard, marine, small internal combustion & automotive engines Made in the U.S.A.

Fogging Oil - 12oz *Case of 6* STA- BIL Fogging Oil is an aerosol propelled oil treatment to protect internal engine components during storage. This fogging oil can be sprayed to coat internal engine components and prevent corrosion. Formulated to displace moisture from metal to protect engine, this product also lubricates the cylinder’s walls, pistons and rings to prevent damage (scuffing) during start-up after prolonged engine storage. It is used in all two and four cycle gasoline engines. The STA-BIL Fogging Oil comes in a convenient 12 ounce aerosol can with nozzle straw to direct oil in tight passages or through spark plug holes in head and cylinder. USAGE DIRECTIONS: Start engine and remove air filter. Spray fogging oil into air intakes of running engine. Shut engine off after 10 seconds. Remove spark plugs. Attach extension tube and spray fogging oil into each cylinder for 3 seconds. Replace spark plugs. Features: STA-BIL Fogging oil coats internal engine components to prevent corrosion Displaces moisture from metal to protect engine Lubricates cylinders to prevent cylinder damage (scuffing) at start up For all 2-cycle and 4-cycle gasoline engines, including outboard, marine, small internal combustion & automotive engines Made in the U.S.A.

STA-BIL For over 60 years, STA-BIL has been engineered to be the most reliable and trusted name in fuel stabilizers and treatments. And if STA-BIL learned one thing along the way, it's this: We love our boats, cars and outdoor power equipment not just for what they are, but for where they take us. So keep driving, riding, toasting and floating. STA-BIL will help you make sure your means of escape is always prepared for departure.

Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow. Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available. All-new sleek, modern design. First all modular system - extremely versatile. Easy to select and install for any radar, dome, light or camera combination. Easy to add accessories. Upgradable for future additions and modifications. Powder coated aluminum construction   Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer. The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."   See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )   Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.   SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686

      Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.     The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces! For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.   SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html     Specials    Closeouts    Remanufactured    Rebates  

Fuel Stabilizer - 1 Gallon AMERICA’S #1 FUEL STABILIZER TREATMENT STA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick easy starts after storage. It removes water to prevent corrosion and cleanses carburetors and fuel injectors. This product also protects the engine from gum, varnish, rust, and corrosion and prolongs the life of any engine. Eliminate the need to drain the fuel of your 2 or 4 cycle engine by treating the fuel with STA-BIL before storing. USAGE DIRECTIONS: Use STA-BIL Fuel Stabilizer in any gasoline-powered vehicle or equipment you plan to store for 30-days or longekeeps the fuel fresh for up to 24 months during storage, eliminating the need to drain your tank. Works effectively in all gasoline blends, including Ethanol-blended fuel, up to E-85. 1-ounce (30-milliliter) treats up to 2½ gallons (9.5-liters) of fuel. Use STA-BIL only with fresh fuel, and keep the gas can or tank 95% full to avoid condensation build up in the tank during storage. Run Engine for 5 minutes after adding product to treat entire fuel system. Product does not contain alcohol. Perfect for collector cars, generators, lawn mowers, snow blowers, etc. PERFECT FOR STORING: LAWNMOWERS: Fuel can deteriorate in as little as 60 days, causing gum and varnish to build up in your lawnmower engine. That means difficulty starting the engine, poor performance and reduced engine life. The simplest, easiest fix is using a fuel stabilizer to prevent fuel deterioration during storage. BOATS: Drain the lower unit of old gear oil and replace with a fresh supply. When changing the gear oil, be sure to check for moisture. If water comes out first, or if you see milky or lumpy oil, this is an indication your boat is experiencing moisture contamination and will need new seals before next season. AUTOMOBILES: Fill the tank 95% full with new fuel and add STA-BIL Storage to keep it fresh for up to 24 months. MOTORCYCLES: When putting your bike away for the season, it’s important to find winter storage that is dry and protected from environmental elements. Avoid storing it near windows to prevent the paint from fading with constant contact with light. Features: America’s #1 Fuel Stabilizer Treatment Keeps fuel fresh for long term storage – up to 24 months Eliminates the need to drain fuel prior to storage Ensures quick easy starts after storage by preventing gum and varnish build up* Effective in all gasoline, including Ethanol and Non-Ethanol For all gasoline engines, including 2-Cycle. Use in your vehicles, motorcycles, small engines, generators, boats Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fuel Stabilizer - 10oz AMERICA’S #1 FUEL STABILIZER TREATMENT STA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick easy starts after storage. It removes water to prevent corrosion and cleanses carburetors and fuel injectors. This product also protects the engine from gum, varnish, rust, and corrosion and prolongs the life of any engine. Eliminate the need to drain the fuel of your 2 or 4 cycle engine by treating the fuel with STA-BIL before storing. USAGE DIRECTIONS: Use STA-BIL Fuel Stabilizer in any gasoline-powered vehicle or equipment you plan to store for 30-days or longekeeps the fuel fresh for up to 24 months during storage, eliminating the need to drain your tank. Works effectively in all gasoline blends, including Ethanol-blended fuel, up to E-85. 1-ounce (30-milliliter) treats up to 2½ gallons (9.5-liters) of fuel. Use STA-BIL only with fresh fuel, and keep the gas can or tank 95% full to avoid condensation build up in the tank during storage. Run Engine for 5 minutes after adding product to treat entire fuel system. Product does not contain alcohol. Perfect for collector cars, generators, lawn mowers, snow blowers, etc. PERFECT FOR STORING: LAWNMOWERS: Fuel can deteriorate in as little as 60 days, causing gum and varnish to build up in your lawnmower engine. That means difficulty starting the engine, poor performance and reduced engine life. The simplest, easiest fix is using a fuel stabilizer to prevent fuel deterioration during storage. BOATS: Drain the lower unit of old gear oil and replace with a fresh supply. When changing the gear oil, be sure to check for moisture. If water comes out first, or if you see milky or lumpy oil, this is an indication your boat is experiencing moisture contamination and will need new seals before next season. AUTOMOBILES: Fill the tank 95% full with new fuel and add STA-BIL Storage to keep it fresh for up to 24 months. MOTORCYCLES: When putting your bike away for the season, it’s important to find winter storage that is dry and protected from environmental elements. Avoid storing it near windows to prevent the paint from fading with constant contact with light. Features: America’s #1 Fuel Stabilizer Treatment Keeps fuel fresh for long term storage – up to 24 months Eliminates the need to drain fuel prior to storage Ensures quick easy starts after storage by preventing gum and varnish build up* Effective in all gasoline, including Ethanol and Non-Ethanol For all gasoline engines, including 2-Cycle. Use in your vehicles, motorcycles, small engines, generators, boats Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fuel Stabilizer - 16oz AMERICA’S #1 FUEL STABILIZER TREATMENT STA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick easy starts after storage. It removes water to prevent corrosion and cleanses carburetors and fuel injectors. This product also protects the engine from gum, varnish, rust, and corrosion and prolongs the life of any engine. Eliminate the need to drain the fuel of your 2 or 4 cycle engine by treating the fuel with STA-BIL before storing. USAGE DIRECTIONS: Use STA-BIL Fuel Stabilizer in any gasoline-powered vehicle or equipment you plan to store for 30-days or longer.  It keeps the fuel fresh for up to 24 months during storage, eliminating the need to drain your tank. Works effectively in all gasoline blends, including Ethanol-blended fuel, up to E-85. 1-ounce (30-milliliter) treats up to 2½ gallons (9.5-liters) of fuel. Use STA-BIL only with fresh fuel, and keep the gas can or tank 95% full to avoid condensation build up in the tank during storage. Run Engine for 5 minutes after adding product to treat entire fuel system. Product does not contain alcohol. Perfect for collector cars, generators, lawn mowers, snow blowers, etc. PERFECT FOR STORING: LAWNMOWERS: Fuel can deteriorate in as little as 60 days, causing gum and varnish to build up in your lawnmower engine. That means difficulty starting the engine, poor performance and reduced engine life. The simplest, easiest fix is using a fuel stabilizer to prevent fuel deterioration during storage. BOATS: Drain the lower unit of old gear oil and replace with a fresh supply. When changing the gear oil, be sure to check for moisture. If water comes out first, or if you see milky or lumpy oil, this is an indication your boat is experiencing moisture contamination and will need new seals before next season. AUTOMOBILES: Fill the tank 95% full with new fuel and add STA-BIL Storage to keep it fresh for up to 24 months. MOTORCYCLES: When putting your bike away for the season, it’s important to find winter storage that is dry and protected from environmental elements. Avoid storing it near windows to prevent the paint from fading with constant contact with light. Features: America’s #1 Fuel Stabilizer Treatment Keeps fuel fresh for long term storage – up to 24 months Eliminates the need to drain fuel prior to storage Ensures quick easy starts after storage by preventing gum and varnish build up* Effective in all gasoline, including Ethanol and Non-Ethanol For all gasoline engines, including 2-Cycle. Use in your vehicles, motorcycles, small engines, generators, boats Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fuel Stabilizer - 1 Gallon *Case of 4* AMERICA’S #1 FUEL STABILIZER TREATMENT STA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick easy starts after storage. It removes water to prevent corrosion and cleanses carburetors and fuel injectors. This product also protects the engine from gum, varnish, rust, and corrosion and prolongs the life of any engine. Eliminate the need to drain the fuel of your 2 or 4 cycle engine by treating the fuel with STA-BIL before storing. USAGE DIRECTIONS: Use STA-BIL Fuel Stabilizer in any gasoline-powered vehicle or equipment you plan to store for 30-days or longekeeps the fuel fresh for up to 24 months during storage, eliminating the need to drain your tank. Works effectively in all gasoline blends, including Ethanol-blended fuel, up to E-85. 1-ounce (30-milliliter) treats up to 2½ gallons (9.5-liters) of fuel. Use STA-BIL only with fresh fuel, and keep the gas can or tank 95% full to avoid condensation build up in the tank during storage. Run Engine for 5 minutes after adding product to treat entire fuel system. Product does not contain alcohol. Perfect for collector cars, generators, lawn mowers, snow blowers, etc. PERFECT FOR STORING: LAWNMOWERS: Fuel can deteriorate in as little as 60 days, causing gum and varnish to build up in your lawnmower engine. That means difficulty starting the engine, poor performance and reduced engine life. The simplest, easiest fix is using a fuel stabilizer to prevent fuel deterioration during storage. BOATS: Drain the lower unit of old gear oil and replace with a fresh supply. When changing the gear oil, be sure to check for moisture. If water comes out first, or if you see milky or lumpy oil, this is an indication your boat is experiencing moisture contamination and will need new seals before next season. AUTOMOBILES: Fill the tank 95% full with new fuel and add STA-BIL Storage to keep it fresh for up to 24 months. MOTORCYCLES: When putting your bike away for the season, it’s important to find winter storage that is dry and protected from environmental elements. Avoid storing it near windows to prevent the paint from fading with constant contact with light. Features: America’s #1 Fuel Stabilizer Treatment Keeps fuel fresh for long term storage – up to 24 months Eliminates the need to drain fuel prior to storage Ensures quick easy starts after storage by preventing gum and varnish build up* Effective in all gasoline, including Ethanol and Non-Ethanol For all gasoline engines, including 2-Cycle. Use in your vehicles, motorcycles, small engines, generators, boats Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fuel Stabilizer - 10oz *Case of 12* AMERICA’S #1 FUEL STABILIZER TREATMENT STA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick easy starts after storage. It removes water to prevent corrosion and cleanses carburetors and fuel injectors. This product also protects the engine from gum, varnish, rust, and corrosion and prolongs the life of any engine. Eliminate the need to drain the fuel of your 2 or 4 cycle engine by treating the fuel with STA-BIL before storing. USAGE DIRECTIONS: Use STA-BIL Fuel Stabilizer in any gasoline-powered vehicle or equipment you plan to store for 30-days or longekeeps the fuel fresh for up to 24 months during storage, eliminating the need to drain your tank. Works effectively in all gasoline blends, including Ethanol-blended fuel, up to E-85. 1-ounce (30-milliliter) treats up to 2½ gallons (9.5-liters) of fuel. Use STA-BIL only with fresh fuel, and keep the gas can or tank 95% full to avoid condensation build up in the tank during storage. Run Engine for 5 minutes after adding product to treat entire fuel system. Product does not contain alcohol. Perfect for collector cars, generators, lawn mowers, snow blowers, etc. PERFECT FOR STORING: LAWNMOWERS: Fuel can deteriorate in as little as 60 days, causing gum and varnish to build up in your lawnmower engine. That means difficulty starting the engine, poor performance and reduced engine life. The simplest, easiest fix is using a fuel stabilizer to prevent fuel deterioration during storage. BOATS: Drain the lower unit of old gear oil and replace with a fresh supply. When changing the gear oil, be sure to check for moisture. If water comes out first, or if you see milky or lumpy oil, this is an indication your boat is experiencing moisture contamination and will need new seals before next season. AUTOMOBILES: Fill the tank 95% full with new fuel and add STA-BIL Storage to keep it fresh for up to 24 months. MOTORCYCLES: When putting your bike away for the season, it’s important to find winter storage that is dry and protected from environmental elements. Avoid storing it near windows to prevent the paint from fading with constant contact with light. Features: America’s #1 Fuel Stabilizer Treatment Keeps fuel fresh for long term storage – up to 24 months Eliminates the need to drain fuel prior to storage Ensures quick easy starts after storage by preventing gum and varnish build up* Effective in all gasoline, including Ethanol and Non-Ethanol For all gasoline engines, including 2-Cycle. Use in your vehicles, motorcycles, small engines, generators, boats Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fuel Stabilizer - 16oz *Case of 12* AMERICA’S #1 FUEL STABILIZER TREATMENT STA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick easy starts after storage. It removes water to prevent corrosion and cleanses carburetors and fuel injectors. This product also protects the engine from gum, varnish, rust, and corrosion and prolongs the life of any engine. Eliminate the need to drain the fuel of your 2 or 4 cycle engine by treating the fuel with STA-BIL before storing. USAGE DIRECTIONS: Use STA-BIL Fuel Stabilizer in any gasoline-powered vehicle or equipment you plan to store for 30-days or longekeeps the fuel fresh for up to 24 months during storage, eliminating the need to drain your tank. Works effectively in all gasoline blends, including Ethanol-blended fuel, up to E-85. 1-ounce (30-milliliter) treats up to 2½ gallons (9.5-liters) of fuel. Use STA-BIL only with fresh fuel, and keep the gas can or tank 95% full to avoid condensation build up in the tank during storage. Run Engine for 5 minutes after adding product to treat entire fuel system. Product does not contain alcohol. Perfect for collector cars, generators, lawn mowers, snow blowers, etc. PERFECT FOR STORING: LAWNMOWERS: Fuel can deteriorate in as little as 60 days, causing gum and varnish to build up in your lawnmower engine. That means difficulty starting the engine, poor performance and reduced engine life. The simplest, easiest fix is using a fuel stabilizer to prevent fuel deterioration during storage. BOATS: Drain the lower unit of old gear oil and replace with a fresh supply. When changing the gear oil, be sure to check for moisture. If water comes out first, or if you see milky or lumpy oil, this is an indication your boat is experiencing moisture contamination and will need new seals before next season. AUTOMOBILES: Fill the tank 95% full with new fuel and add STA-BIL Storage to keep it fresh for up to 24 months. MOTORCYCLES: When putting your bike away for the season, it’s important to find winter storage that is dry and protected from environmental elements. Avoid storing it near windows to prevent the paint from fading with constant contact with light. Features: America’s #1 Fuel Stabilizer Treatment Keeps fuel fresh for long term storage – up to 24 months Eliminates the need to drain fuel prior to storage Ensures quick easy starts after storage by preventing gum and varnish build up* Effective in all gasoline, including Ethanol and Non-Ethanol For all gasoline engines, including 2-Cycle. Use in your vehicles, motorcycles, small engines, generators, boats Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

360°® Marine - 8oz *Case of 12* CLEANS THE FUEL SYSTEM TO IMPROVE PERFORMANCE STA-BIL 360°® MARINE™ – use it with every fill-up to help keep your engine running cleaner, leaner, smoother, and stronger than ever. Features: America’s most trusted fuel additive Engineered to combat the effects of harsh marine climates Provides defense against the harmful effects of ethanol-blended fuels Industry-leading water removal properties Cleans the fuel system of watersport engines to ensure it operates at peak performance Keeps fuel fresh for up to 12 months Compatible with all types of maritime vessels, including boats and jet skis Specialized PEA Fuel System cleaning agents USAGE DIRECTIONS: 1oz treats up to 10 gallons (38 liters) of fuel.  The product does not contain alcohol. Perfect for use in all boats, jet skis, and other watersport engines. Pour STA-BIL 360Ëš® MARINE™ directly into the fuel tank prior to gassing up. Recommended for use before every fill-up to preserve fuel, clean the fuel system, and prevent corrosion in boat engines. TAKE PERFORMANCE OVER THE TOP PREVENT ETHANOL DAMAGE: Protect your entire fuel system against damaging rust and corrosion caused by moisture and ethanol fuels. Provides a protective coating on ALL the metal parts of the entire fuel system and combustion chamber, even when the engine is not running. INCREASE POWER: Strip away carbon buildup, gum, and varnish that can inhibit engine performance, and get the most out of your fuel by burning it more completely. Bring back the power your engine once knew. Clear and prevent harmful gum, varnish, and buildup throughout the combustion chamber and injectors. MAXIMIZE FUEL ECONOMY: Burn fuel more completely and efficiently by preserving the fuel system and engine. *Product benefit claims are effective when used as directed.  The STA-BIL brand outperforms the competition.

Gun Cleaner & Lubricant (CLP) - 8oz Using a high-quality formula that is manufactured with care, STA-BIL Gun CLP is engineered to clean, lubricate, and protect your firearms. So, why did we create it? Ever since its inception in 1958, the STA-BIL Brand has been dedicated to preserving the things you care about most. That is why we are proud to introduce a product that will keep your guns working in great condition. The Gun CLP cleans away gun powder and residue, provides superior lubrication with a unique Anti-Wear additive, and protects against corrosion by displacing moisture. Even better, the product is highly versatile as it works well with pistols, rifles, and shotguns. STA-BIL cares about your freedom and wants your firearms to be ready when you are. Allow our Gun CLP to keep them accessible and functioning at the highest level. Features: Protects against corrosion Cleans. Lubricates. Protects. Removes powder residue, bullet fouling, and other contaminates Restores accuracy Long-lasting, anti-wear additive for critical components Improves operation of action Provides a durable, non-hindering protective barrier Directions:  Before using this product, make sure the weapon is unloaded. Twist top to open. Dispense a small drop of STA-BIL Gun CLP onto manufacturer-recommended locations of the gun for superior lubrication. This can also be used to clean and protect the gun’s components from corrosion and wear.