Mora® - 2-Piece Hand Auger - 6" Iconic as a red fire hydrant or yellow sun, Mora's powder blue drill is as recognizable to ice anglers as the ice itself. Time-tested, the Mora strikes the target where price intersects quality, yielding value no other entry-level hand-auger can deliver. Includes: wing-bolt, blades, and blade cover. Features: Ergonomically Designed Handles Adjustable Handle: Adjusts from 48" - 57" Breaks Down into Two Pieces for Transport and Storage High-Alloy Carbon Steel Mora Blades Powder Coated Paint to Reduce Ice Build-up MD-6 is 6lbs WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Lithium 24V Lite-Flite Auger - 6" More power, more holes, and stable ergonomic handling in the lightest, most compact peak performer in its class. Crushes performance of standard handheld cordless drivers. Features: Powerhead/Motor Electric DC Brushless Motor Planetary Gear System 50:1 Gear Ratio Power Button with Deadman Safety Switch Forward and Reverse Impact-Resistant Long Filament Handles WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gianneschi EXCELSIOR 2-GB Hand Pump This pump is suitable for lifting and pushing of clear liquids, and can be used for fresh or sea water. The body of the pump is cast iron, and the internal parts are bronze. The performance of this hand pump is in accordance with EN ISO 9906. The flow rate of 6.3 GPM at 95 feet head (40 PSI) is relative to 60 cycles/minute.   Pump Body: Cast Iron Impeller: Bronze Port Size: Inlet Port is 1 Inch Discharge Port is 1 Inch

Gianneschi SUPER LARIO 2 Bronze Hand Pump 1" Gianneschi SUPER-LARIO-3, SUPER LARIO 3 Self Priming Double Acting Piston Pump, rated for 9.2 GPM, Bronze construction, Bronze impeller. Inlet Port is 1 Inch, Discharge Port is 1 Inch.   Applications for the SUPERLARIO3 include pumping aggressive liquids, bilge emptying, tanks, diesel oil intake, oil transfer.

Ampco Pumps AC114MD56C-S/VITON Peo 1 1/2 X 1 1/2 Kit

Lithium 40V Lazer™ Ice Auger - 8" Built from the ground up with the features that make a difference on the ice, the new StrikeMaster® Lithium 40V combines decades of ice-auger experience with leading-edge design and power engineering. This auger will muscle through ice hole after hole. Its 40-volt, 5-amp hour lithium-ion battery powers an electric DC brushless motor for reliable, constant speed and torque. A planetary gear system provides lightweight durability and high power density for unmatched performance. Innovative high-performance cutting via the legendary StrikeMaster® Lazer™ blades provides the fastest cutting edge, period. Custom impact-resistant handles with ergonomically placed opposing deadman/power switch and built-in LED lights. Forward/reverse control runs in forward for cutting and reverse to flush slush from the hole. The 2-amp rapid charge battery charging station charges the battery back to full charge in 2-1/2 hours.  Powerhead/Motor Electric DC Brushless Motor Planetary Gear System 15.9:1 Gear Ratio Power Button with Deadman Safety Switch Forward and Reverse Built-in LED Lights Impact-Resistant Long Filament Handles Blades Twin Serrated Stainless Steel Lazer™ Blades Battery 40V, 5-Amp Hour Lithium ION Battery Internal Battery Management System Ensures Battery Longevity 4 LED Battery Status Indicator 2-Amp Charging Station (Recharges battery in 2-1/2 hours) Battery and Charger Included 100 holes - 8" auger on a single charge* Based on repeated tests with 16" of ice Limited 2-Year Manufacturer’s Warranty on Motor, Battery and Charger WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Lithium 40V Lazer™ Ice Auger - 10" Built from the ground up with the features that make a difference on the ice, the new StrikeMaster® Lithium 40V combines decades of ice-auger experience with leading-edge design and power engineering. This auger will muscle through ice hole after hole. Its 40-volt, 5-amp hour lithium-ion battery powers an electric DC brushless motor for reliable, constant speed and torque. A planetary gear system provides lightweight durability and high power density for unmatched performance. Innovative high-performance cutting via the legendary StrikeMaster® Lazer™ blades provides the fastest cutting edge, period. Custom impact-resistant handles with ergonomically placed opposing deadman/power switch and built-in LED lights. Forward/reverse control runs in forward for cutting and reverse to flush slush from the hole. The 2-amp rapid charge battery charging station charges the battery back to full charge in 2-1/2 hours.  Powerhead/Motor Electric DC Brushless Motor Planetary Gear System 15.9:1 Gear Ratio Power Button with Deadman Safety Switch Forward and Reverse Built-in LED Lights Impact-Resistant Long Filament Handles Blades Twin Serrated Stainless Steel Lazer™ Blades Battery 40V, 5-Amp Hour Lithium ION Battery Internal Battery Management System Ensures Battery Longevity 4 LED Battery Status Indicator 2-Amp Charging Station (Recharges battery in 2-1/2 hours) Battery and Charger Included 70 holes - 10" auger on a single charge* Based on repeated tests with 16" of ice Limited 2-Year Manufacturer’s Warranty on Motor, Battery and Charger WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

24" Hand Pump - 6 Strokes Per Gallon Features: Light, tough, durable, and easy to use Ideal for emergency pumping, where electricity is not available Comfortable handle grip and extra-large capacity makes manual pumping less of a chore Ideal for emergency pumping 6 strokes per gallon

Handle Telescoping - 6-11' w/Boat Hook Easily get to those hard-to-reach areas on your RV, boat, home, and more with Camco's adjustable-length multi-purpose handles. They feature an ergonomic teardrop design for comfortable use. Anodized aluminum construction resists rusting, and the TPE hand grip gives you a secure and comfortable grip. Patented. Features: Adjustable 6-11 ft. length Ergonomic tear-drop design Easily wash higher areas on your RV, boat, home, etc. Anodized aluminum construction TPE hand grip

Brass Plated Coupler Lock - 2 Piece  Designed for theft deterrence, coupler locks also provide an additional level of security to prevent accidental uncoupling while in transit to better protect your trailer. Corrosion resistant brass plated zinc construction. Two-piece design for better access in hard to reach places. Fits most coupler sizes. Includes two keys. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Nor'Easter Mooring Whips 2 Piece Whips f/Boats up to 30' - Adjustable Base Monarch Mooring Whips are made of a special solid fiberglass. The poles are cut to specified lengths and the blanks are then centerless ground to give them a precision taper. They are painted to protect them from the deteriorating effects of ultra violet rays from the sun. They provide reliable protection against dockside or seawall damage. They have tapered, solid fiberglass poles, working like strong shock absorbers, to apply constant pressure to your boat- keeping it a safe distance from the dock or seawall. This affords protection against boat wakes, or storms. The Nor' Easter is adjustable and practical, yet has no moving parts. Monarch Moor Whips are easy to install. The bow and stern lines are tied to a piling, cleats, or the bulkhead (if there is no dock) and the two spring lines criss-cross. These lines are for control of fore and aft movement.

Nor'Easter Mooring Whips 2 Piece Whips f/Boats up to 36' - Adjustable Base Monarch Mooring Whips are made of a special solid fiberglass. The poles are cut to specified lengths and the blanks are then centerless ground to give them a precision taper. They are painted to protect them from the deteriorating effects of ultra violet rays from the sun. They provide reliable protection against dockside or seawall damage. They have tapered, solid fiberglass poles, working like strong shock absorbers, to apply constant pressure to your boat- keeping it a safe distance from the dock or seawall. This affords protection against boat wakes, or storms. The Nor' Easter is adjustable and practical, yet has no moving parts. Monarch Moor Whips are easy to install. The bow and stern lines are tied to a piling, cleats, or the bulkhead (if there is no dock) and the two spring lines criss-cross. These lines are for control of fore and aft movement.

Sou'Easter Mooring Whips 2 Piece Whips f/Boats up to 23' - Fixed Base Monarch Mooring Whips are made of a special solid fiberglass. The poles are cut to specified lengths and the blanks are then centerless ground to give them a precision taper. They are painted to protect them from the deteriorating effects of ultra violet rays from the sun. They provide reliable protection against dockside or seawall damage. They have tapered, solid fiberglass poles, working like strong shock absorbers, to apply constant pressure to your boat- keeping it a safe distance from the dock or seawall. This affords protection against boat wakes, or storms. The Sou'Easter offers the budget conscious boater security at a lower price. Monarch Moor Whips are easy to install. The bow and stern lines are tied to a piling, cleats, or the bulkhead (if there is no dock) and the two spring lines criss-cross. These lines are for control of fore and aft movement.

Nor'Easter Mooring Whips 2 Piece Whips f/Boats up to 23' - Adjustable Base Monarch Mooring Whips are made of a special solid fiberglass. The poles are cut to specified lengths and the blanks are then centerless ground to give them a precision taper. They are painted to protect them from the deteriorating effects of ultra violet rays from the sun. They provide reliable protection against dockside or seawall damage. They have tapered, solid fiberglass poles, working like strong shock absorbers, to apply constant pressure to your boat- keeping it a safe distance from the dock or seawall. This affords protection against boat wakes, or storms. The Nor' Easter is adjustable and practical, yet has no moving parts. Monarch Moor Whips are easy to install. The bow and stern lines are tied to a piling, cleats, or the bulkhead (if there is no dock) and the two spring lines criss-cross. These lines are for control of fore and aft movement.

90° Tinned Copper Lug #1/0 - 5/16" - 2-Piece 90° bend for ease of wire routing.