Heavy Duty 2-Speed Wiper Motor - 2.5" Shaft - 12V  Features: Black Powder Coated Housing 304 Stainless Steel Mounting Plate & Mounting Hardware 316 Stainless Steel Shaft Chrome Plated Brass Shaft Housing Adjustable Sweep 45°, 60°, 80°, & 110° Adjustable Park Position Right or Left Will Power up to a 24" Arm & 22" Blade Guaranteed 3 Years

Heavy Duty 2-Speed Wiper Motor - 1.5" Shaft - 12V  Features: Black Powder Coated Housing 304 Stainless Steel Mounting Plate & Mounting Hardware 316 Stainless Steel Shaft Chrome Plated Brass Shaft Housing Adjustable Sweep 45°, 60°, 80°, & 110° Adjustable Park Position Right or Left Will Power up to a 24" Arm & 22" Blade Guaranteed 3 Years

Heavy Duty 2-Speed Wiper Motor - 3.5" Shaft - 12V  Features: Black Powder Coated Housing 304 Stainless Steel Mounting Plate & Mounting Hardware 316 Stainless Steel Shaft Chrome Plated Brass Shaft Housing Adjustable Sweep 45°, 60°, 80°, & 110° Adjustable Park Position Right or Left Will Power up to a 24" Arm & 22" Blade Guaranteed 3 Years

Heavy Duty Waterproof 2-Speed Wiper Motor - 1.5" Shaft - 12V High Performance at a Competitive Price. Your boat's windshield wipers are only as powerful as the motor that power them. The Ongaro Heavy Duty Waterproof Motor offers the security of waterproof protection and delivers dependable, trouble-free operation all at a competitive price. Easily replaces older Ongaro and Bosch-type wiper motors for a simple, yet powerful, upgrade. Features: Torque of 15 N-m Two speeds Accepts up to 24 x 24" arm and blade Self-parking gear to left or right Adjustable sweep angle 12V Improved waterproof rating to IP66 Rigid aluminum housing Insulated grounding EMC protected CE Approved Additional Features: Two sweep speeds of 35 or 55 sweeps per minute The sweep angle can be adjusted from 40 to 110 degrees High quality all aluminum housing dissipates heat more efficiently than plastic for longer motor life The aluminum construction also provides better stability when mounted The insulated grounding is suitable for use with steel, aluminum, wooden or GRP boats Guaranteed for 3 years

Heavy Duty Waterproof 2-Speed Wiper Motor - 3.5" Shaft - 12V High Performance at a Competitive Price. Your boat's windshield wipers are only as powerful as the motor that power them. The Ongaro Heavy Duty Waterproof Motor offers the security of waterproof protection and delivers dependable, trouble-free operation all at a competitive price. Easily replaces older Ongaro and Bosch-type wiper motors for a simple, yet powerful, upgrade. Features: Torque of 15 N-m Two speeds Accepts up to 24 x 24" arm and blade Self-parking gear to left or right Adjustable sweep angle 12V Improved waterproof rating to IP66 Rigid aluminum housing Insulated grounding EMC protected CE Approved Additional Features: Two sweep speeds of 35 or 55 sweeps per minute The sweep angle can be adjusted from 40 to 110 degrees High quality all aluminum housing dissipates heat more efficiently than plastic for longer motor life The aluminum construction also provides better stability when mounted The insulated grounding is suitable for use with steel, aluminum, wooden or GRP boats Guaranteed for 3 years

Heavy Duty Waterproof 2-Speed Wiper Motor - 2.5" Shaft - 12V High Performance at a Competitive Price. Your boat's windshield wipers are only as powerful as the motor that power them. The Ongaro Heavy Duty Waterproof Motor offers the security of waterproof protection and delivers dependable, trouble-free operation all at a competitive price. Easily replaces older Ongaro and Bosch-type wiper motors for a simple, yet powerful, upgrade. Features: Torque of 15 N-m Two speeds Accepts up to 24 x 24" arm and blade Self-parking gear to left or right Adjustable sweep angle 12V Improved waterproof rating to IP66 Rigid aluminum housing Insulated grounding EMC protected CE Approved Additional Features: Two sweep speeds of 35 or 55 sweeps per minute The sweep angle can be adjusted from 40 to 110 degrees High quality all aluminum housing dissipates heat more efficiently than plastic for longer motor life The aluminum construction also provides better stability when mounted The insulated grounding is suitable for use with steel, aluminum, wooden or GRP boats Guaranteed for 3 years

Standard Wiper Motor - 2.5" Shaft - 12V  Features: Black Powder Coated Aluminum cover 304 Stainless Steel Mounting Plate, Shaft & Mounting Hardware 80° or 110° Adjustable Sweep Will Power up to a 14" Arm & Blade Guaranteed 3 Years

Groco 12V-F 12V Motor 1/8Hp 3.5" Shaft  

Wiper Motor 1000 Series - 12V - 2.5" Shaft - 80° The 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree. Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Coast to park with adjustable right or left self parking Retail version includes 5 amp fuse and holder (on/off switch not included) RF shielded circuitry Weight: 1.75 lbs Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting) Measures approximately 6.625" L x 3.375"W x 2" D Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm) Stall current: 9.8-10.0 amps No load current: 0.8-1.2 amps+

Wiper Motor 1000 Series - 12V - 2.5" Shaft - 110° The 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree. Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Coast to park with adjustable right or left self parking Retail version includes 5 amp fuse and holder (on/off switch not included) RF shielded circuitry Weight: 1.75 lbs Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting) Measures approximately 6.625" L x 3.375"W x 2" D Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm) Stall current: 9.8-10.0 amps No load current: 0.8-1.2 amps+

Wiper Motor 1000 Series - 12V - 1.5" Shaft - 80° The 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree. Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Coast to park with adjustable right or left self parking Retail version includes 5 amp fuse and holder (on/off switch not included) RF shielded circuitry Weight: 1.75 lbs Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting) Measures approximately 6.625" L x 3.375"W x 2" D Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm) Stall current: 9.8-10.0 amps No load current: 0.8-1.2 amps+

Wiper Motor 1000 Series - 12V - 1.5" Shaft - 110° The 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree. Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Coast to park with adjustable right or left self parking Retail version includes 5 amp fuse and holder (on/off switch not included) RF shielded circuitry Weight: 1.75 lbs Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting) Measures approximately 6.625" L x 3.375"W x 2" D Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm) Stall current: 9.8-10.0 amps No load current: 0.8-1.2 amps+

Heavy Duty Lug 4/0 Wire 5/16" Post *100-Pack Ancor Marine Grade lugs are manufactured from 100 percent heavy-duty annealed tinned copper, providing maximum current flow while resisting corrosion from salt and moisture. The seamless barrel design allows for maximum strength when crimped. Closed-end design seals out moisture so cables stay dry and corrosion free. Specifications: 100% Tinned Copper UL 486A

Wiper Motor, 1000 Series, 12V, 2.5" Shaft, 65° Sweep The 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree. Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Coast to park with adjustable right or left self parking Retail version includes 5 amp fuse and holder (on/off switch not included) RF shielded circuitry Weight: 1.75 lbs Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting) Measures approximately 6.625" L x 3.375"W x 2" D Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm) Stall current: 9.8-10.0 amps No load current: 0.8-1.2 amps

Heavy Duty Lugs - 8 Gauge Wire - 5/16" Post - 25-Pack Cable Gauge: 8 Screw Size: 5/16" ANCOR Marine Grade™ lugs are manufactured from heavy duty annealed tinned copper, providing for maximum current flow 100% tin plated copper resists corrosion from salt and moisture Seamless barrel design allows for maximum strength when crimped Closed end design seals out moisture so cables stay dry and corrosion free WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.