Self Levelling Radar Mount - Mast Devices Compatible with LMM-2 Self Levelling Radar Mount Furuno - 1621, 1622, 1623, 1715,  1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D / DRS4D-NXT, DRS4W, NavNet (18"), NavNet (24") Humminbird - AS 21RD4KW Interphase - Mini RE-1, RE-8, RE-9 JRC- 1000, 1000mk2, 1066, 1500, 1500mk2 Koden - 2kW 12", 4kW [RB715A] Lorenz - 2kW Lowrance - LRA-1800 / RB714A / DX42 Navman - 8000 Series [8084/8120] 18" Nobeltec - 2kW (20") Northstar - M series/8000i (18") Seiwa - SWR-1, SWR-8,SWR-9 Simrad - GB40 / NX40/45 / NSE8/12 / RB712A / DX42S Sitex - MDS -1, MDS -8, MDS -9, MDS-12, NKE-1066 Techmarine - T-72.01, T-72.02,  T-72.04 Our Self-Levelling Mast Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in heel angle of the boat whilst eliminating all small oscillations. Features Hydraulic damping to eliminate minor oscillations Sealed system - entirely maintenance free Passive system - no power required Reduced weight aloft - complete system weighs only 3.4 kg Easy upgrade from fixed mast mount - same mounting footprint as SC20 & M92722 Attached to mast by four swivel ffet - matches the profile of any mast 12 point fixing - highest quality monel rivets Compact mount - radar extends only minimum distance from front of mast Materials Finest quality machined and anodised aluminium mast adapter Marine grade 316 stainless steel cradle and base plate Kit includes 1 x Levelling mount 1 x Mast Adapter 1 x Complete fastening pack

Self Levelling Radar Mount - Mast Compatible Units: Garmin GMR18/GMR18HD/GMR24HD Raymarine RD218/RD424 Lowrance 3G Broadband Simrad 3G Broadband Simrad DX45/DX60 The Self-Levelling Mast Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in the heel angle of the boat whilst eliminating all small oscillations. Features: Hydraulic damping to eliminate minor oscillations Sealed system - entirely maintenance-free Passive system - no power required Reduced weight aloft - complete system weighs only 3.4 kg Easy upgrade from fixed mast mount - same mounting footprint as SC20 & M92722 Attached to the mast by four swivel feet - matches the profile of any mast 12 point fixing - highest quality Monel rivets Compact mount - radar extends only minimum distance from front of mast Materials: Finest quality machined and anodised aluminium mast adapter Marine grade 316 stainless steel cradle and base plate Kit Includes: 1 x Levelling mount 1 x Mast Adapter 1 x Complete fastening pack

 LMB-F2 Self Leveling Radar Mount - Backstay (F) for Sitex/Simrad Domes  The Self-Levelling Backstay Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in the heel angle of the boat whilst eliminating all small oscillations. Features: Hydraulic damping to eliminate minor oscillations Sealed system - entirely maintenance free Passive system - no power required Lightweight head unit - reduced weight aloft Stainless radome cradle with fine tune adjustment for backstay angle - suitable for any yacht Nylon backstay bushing supplied - clamps around backstay allowing cable tension to be adjusted Dimensions: 2.6m pole - supplied in lengths of 1.3m Additional 0.6m and 1.3m lengths are available Materials: Finest quality machined and anodized aluminum pole and head unit - lasts the lifetime of your yacht Marine grade 316 stainless steel cradle and base plate Kit Includes: 1 x Levelling mount with integral backstay bushes (to fit 7, 8, 10, and 12mm diameter backstay cables) 2 x 1.3m lengths of the mounting pole 1 x Joiner piece for the mounting pole 1 x Universal base for the mounting pole 1 x Complete fastening pack

Self-Levelling Radar Mount - Backstay - Fwd (F) - Made Specifically for Raymarine & Garmin Domes Our Self-Levelling Backstay Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in heel angle of the boat whilst eliminating all small oscillations. Features: Hydraulic damping to eliminate minor oscillations Sealed system - entirely maintenance free Passive system - no power required Lightweight head unit - reduced weight aloft Stainless radome cradle with fine tune adjustment for backstay angle - suitable for any yacht Nylon backstay bushing supplied - clamps around backstay allowing cable tension to be adjusted Dimensions: 2.6m pole - supplied in lengths of 1.3m Additional 0.6m and 1.3m lengths available Materials: Finest quality machined an anodised aluminum pole and head unit - lasts the lifetime of your yacht. Marine grade 316 stainless steel cradle and base plate Kit includes: 1 x Levelling mount with integral backstay bushes (to fit 7, 8, and 10 and 12mm diameter backstay cables) 2 x 1.3m lengths of mounting pole 1 x Joiner piece for mounting pole 1 x Universal base for mounting pole 1 x Complete fastening pack

Self Levelling Radar Mount - Backstay - Aft (A) Made specifically for Raymarine/Garmin Domes Our Self-Levelling Backstay Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in heel angle of the boat whilst eliminating all small oscillations. Features: Hydraulic damping to eliminate minor oscillations Sealed system - entirely maintenance free Passive system - no power required Lightweight head unit - reduced weight aloft Stainless radome cradle with fine tune adjustment for backstay angle - suitable for any yacht Nylon backstay bushing supplied - clamps around backstay allowing cable tension to be adjusted Dimensions: 2.6m pole - supplied in lengths of 1.3m Additional 0.6m and 1.3m lengths available Materials: Finest quality machined and anodised aluminium pole and head unit - lasts the lifetime of your yacht Marine grade 316 stainless steel cradle and base plate Kit includes 1 x Levelling mount with integral backstay bushes (to fit 7, 8, 10 and 12mm diameter backstay cables) 2 x 1.3m lengths of mounting pole 1 x Joiner piece for mounting pole 1 x Universal base for mounting pole 1 x Complete fastening pack

Self Levelling Radar Mount - Backstay - Aft (A) - Made specifically for Sitex/Simrad Domes Our Self-Levelling Backstay Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in heel angle of the boat whilst eliminating all small oscillations. Features: Hydraulic damping to eliminate minor oscillations Sealed system - entirely maintenance free Passive system - no power required Lightweight head unit - reduced weight aloft Stainless radome cradle with fine tune adjustment for backstay angle - suitable for any yacht Nylon backstay bushing supplied - clamps around backstay allowing cable tension to be adjusted Dimensions: 2.6m pole - supplied in lengths of 1.3m Additional 0.6m and 1.3m lengths available Materials: Finest quality machined and anodised aluminium pole and head unit - lasts the lifetime of your yacht Marine grade 316 stainless steel cradle and base plate Kit includes 1 x Levelling mount with integral backstay bushes (to fit 7, 8, 10 and 12mm diameter backstay cables) 2 x 1.3m lengths of mounting pole 1 x Joiner piece for mounting pole 1 x Universal base for mounting pole 1 x Complete fastening pack

Self Levelling Radar Mount - Pole Our Self-Levelling Pole Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in heel angle of the boat whilst eliminating all small oscillations. Features Sealed system - entirely maintenance free Universal adjustable base able to rotate through 360° and angle from horizontal all the way to vertical Supplied with two support modules - a deck strut and rail stand off for maximum fore / aft and sideways support Fits to angled decks, narrow swimming steps and steeply sloping transoms Unique pole extrusion with two cable channels with cover strips to hold cables in place Easily removed for racing or winter storage, leaving just low profile deck on deck Existing SC100 Pole Mount installations can be upgraded to self levelling with our upgrade kit Dimensions 2.5m / 8.3' pole 3" diameter pole Base diameter of just 80mm / 3.1" Materials Finest quality machined and anodised aluminium head unit ? lasts the lifetime of your yacht Marine grade 316 stainless steel cradle and base plate Marine grade 6082 aluminium pole - polyester powder coated for a durable and gloss white finish Kit includes 1 x Pole (complete with 2 x cable cover strips) 1 x Adjustable base 1 x Levelling head unit and cradle with plate 1 x 1200mm / 3.9' deck strut 1 x Rail stand off for 25mm / 1" rail

Self Levelling Radar Mount - Pole Our Self-Levelling Pole Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in heel angle of the boat whilst eliminating all small oscillations. Features Sealed system - entirely maintenance free Universal adjustable base able to rotate through 360° and angle from horizontal all the way to vertical Supplied with two support modules - a deck strut and rail stand off for maximum fore / aft and sideways support Fits to angled decks, narrow swimming steps and steeply sloping transoms Unique pole extrusion with two cable channels with cover strips to hold cables in place Easily removed for racing or winter storage, leaving just low profile deck on deck Existing SC100 Pole Mount installations can be upgraded to self levelling with our upgrade kit Dimensions 2.5m / 8.3' pole 3" diameter pole Base diameter of just 80mm / 3.1" Materials Finest quality machined and anodised aluminium head unit ? lasts the lifetime of your yacht Marine grade 316 stainless steel cradle and base plate Marine grade 6082 aluminium pole - polyester powder coated for a durable and gloss white finish Kit includes 1 x Pole (complete with 2 x cable cover strips) 1 x Adjustable base 1 x Levelling head unit and cradle with plate 1 x 1200mm / 3.9' deck strut 1 x Rail stand off for 25mm / 1" rail

GPS / VHF Antenna Mount for Self Levelling Radar Mount Single mount for installing an additional GPS / VHF antenna above the radar. Features Attaches to top of radome cradle Fits all standard GPS / VHF antennas with 1? x 14 tpi thread attachment Materials Marine grade 316 stainless steel GPS / VHF Antenna Mount Kit 1 x GPS / VHF mount 2 x M6 x 8mm bolts 2 x M6 spring washers

SPT1002 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS 2D, 42DL, 42DL+, 4D, 4D-NXT, DRS4W, NavNet 18" and 24" Humminbird - AS 21RD4KW Inerphase - Mini RE-1, 8, 9 JRC 100, 100mk2, 1066, 1500, 1500mk2, 1800, 2000 Koden - 2kW 12" Lowrance - LRA-1800/RB714A/DX42 Navman - 8000 Series - 18" Seiwa - SWR-1, SWR-8, SWR-9 Simrad - GB40, NX4-/45, NSE8/12, RB712A, DX42S Sitex - MDS-1, 8, 9, 12, NKE-1066 Techmarine - T72.01, T72.02, T-72.04 Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual

LMB-EXTSHORT 0.6M Extension Kit for LMB Mounting Pole 0.6M Extension Kit for LMB mounting pole. Includes joiner and fastening kit. Single mount for installing an additional GPS/VHF antenna above the radar. Features: Attaches to top of radome cradle Fits all standard GPS / VHF antennas with 1” x 14 tpi thread attachment Marine grade 316 stainless steel Additional Information: LM-GPS – GPS / VHF Antenna Mount for Self Levelling Radar Mount Enables installation of GPS antenna and ‘Whip’ type VHF, HF/SSB, AM/FM, and cellular antennas up to 1m in height. Must have the standard 1” x 14TPI thread as their fixing. Also works with Pacific Aerials P6161 / P6162 adapter for their Pro range of antennas.

SPT1001 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18 and 24, GMR18HD, 18xHD, 18HD+, GMR24HD and 24xHD, GMR40 radars Humminbird - HB2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Nobletec - 4KW radars Raymarine - QUANTUM (Q24C) and QUANTUM 2 (Q24D0, RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, 60, 64-S, GB40/NX40/45/NSE1/12 radars Sitex - RADARpc-4D Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual

ROKK Mini Self-Adhesive Surface Mount 3M self-adhesive base mount that fits any flat surface.  Features: No drilling required to install Works on any flat surface *Sold as an Individual

Ampco Pumps AC114MD56C-S/VITON Peo 1 1/2 X 1 1/2 Kit

APT6002 Aluminum PowerTower® Open Array Radar Mount - 6" Aft Leaning Scanstrut Aluminium PowerTower® has been designed and engineered to install your Open Array on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  Compatible with: Garmin - GMR Fantom 254, 256, 54, 4, 6 radars Humminbird - RH 44 radar JRC - JMA 2343 / 5104 (Radome: NKE-2042) radar Koden - 12kW [RB717A], 25kW [RB717A], 4kW [ RB716A], 6kW [ RB716A], 6kW [RB717A] radars Lowrance - LRA 4000, 5000 radars Navman - 8000 Series (8084/8120) 4' radars Nobeltec - 4kW / 6kW radars Northstar - M series/8000i (4' and 6') radars Seiwa - SWR-10 (3.5' and 4.5') radars Simrad -GB40 / NX40/45 / NSE8/12, DX64S radars Sitex - MDS -10 (4' and 5'), RADARpc - 3.5 or 4.5 radars Techmarine - T-74.05 and T-74.06 radars Features: Designed to fit the most up to date open array radars from Garmin, Raymarine, Simrad, and Furuno Pre-drilled mounting holes allow the open array to fasten straight to the PowerTower® Constructed from the best marine-grade aluminum Paint finishes comply with our unique 4 step marine paint system Technical Specifications: Radar Type - Open Array Material - Aluminum  Height - 6.9" (158mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual