|
244 Flush Deck Mount
With splash cover
For all Scotty post mount rod holders
Dimensions 4" x 2" x 2"
Bolting Dimensions 1 5/16" x 3 3/16"
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
10.49 |
|
|
244 Flush Deck Mount
With splash cover
For all Scotty post mount rod holders
Dimensions 4" x 2" x 2"
Bolting Dimensions 1 5/16" x 3 3/16"
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
7.85 |
|
|
Single Locking Flush Deck Socket w/LeveLock Mount & Flange
This 18-8 mirror polished stainless steel and hard anodized aluminum mount features Magma's LeveLock all angle adjustable locking mount, a push button locking pin and a flange gasket with the integral flip-up water seal cap.
Compatible With:
Magma Rectangular Grills and Single Mount Tables
Technical Specifications:
Material - 18-8 Stainless Steel and 356 Anodized Aluminum
Dimensions (W x H) - 2-5/8" x 6-1/16" (6.7 x 15.5 cm)
Weight - 1.22 lb (.56 kg)
*Sold as an Individual
|
54.00 |
|
|
344 Round Flush Deck Mount
Sealed base for watertight applications (such as kayak decks) with splash cover.
For all Scotty post mount rod holders.
Dimensions: 3 3/4" diameter
Bolting Dimensions 2 3/16" x 2 3/16"
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
9.82 |
|
|
Mount - Dual Locking Flush Deck Socket with Adjustable & Locking LeveLock
Two attractive mirror-polished 18-8 stainless steel flush deck sockets and post sets. The posts are equipped with Magma's versatile LeveLock adjustable locking mount, allowing complete fore and aft adjustment of the table. A push-button lock pin allows use while underway. Sockets feature a flange gasket with an integral flip-up water seal cap. Some fasteners are required for installation.
Specifications:
Width: 3-7/16 in. (129 mm)
Height Full Assembly: 6-1/16 in. (155 mm)
Height Installed: 4-3/16 in. (106 mm)
Weight: 2.40 lb. (1.09 kg)
|
84.37 |
|
|
Anchor Lock w/ Flush Deck Mount (P/N 244)
Anchor release system for small boats in still-water fishing situations.
Features:
Easy lock and release action allows anchor line adjustment with only one hand.
For use with rope up to 1/2' diameter.
Tough construction and roller bearing for smooth, quiet operation.
Includes No. 244 Flush Mount Bracket
Mount Dimensions: 4" x 2" x 2"
Bolting Dimensions: 1-15/16" 3-3/16"
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
31.26 |
|
|
Power Lock
Scotty's most popular value-priced, positive-locking, open style rod holder. Fibre reinforced engineering nylon, offers strength, resilience and reliability.
No. 231
Power Lock Rod Holder with No. 244 Flush Deck Mount
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
22.54 |
|
|
281 Bait Caster / Spinning Rod Holder
Holds a bait caster reel in a cushioned cradle.
A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top.
Includes No. 244 Flush Deck Mount
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
20.35 |
|
|
Fly Rod Holder
Innovative compact design, Allows hands free trolling with a fly rod. Fully adjustable and includes a safety strap.
Includes No. 244 Flush Deck Mount
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
25.50 |
|
|
No. 351 Rodmaster II
Fibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pin
Includes No. 244 Flush Deck Mount
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
21.11 |
|
|
Dual Locking Flush Deck Socket Mount
Two attractive mirror polished 18-8 stainless steel flush deck socket sets, features a push button lock pin and includes a flange gasket with integral flip-up water seal cap. These sockets mount flush for an uncluttered deck.
Compatible With:
Dual Mounted Grills and Tables
Technical Specifications:
Material - 18-8 Stainless Steel
Dimensions (installed) (W x H) - 2-5/8" x 1-15/32" (9.7 x 3.7 cm)
Weight - 1.51 lb (.69 kg)
*Sold as a Pair
|
67.50 |
|
|
Twist-Lock™ Suction Cup Mount w/Universal X-Grip® Cradle for 10" Large Tablets
The RAM-B-166-UN9U consists of a 3.3" diameter suction cup twist lock base, double socket arm, round base adapter and universal X-Grip® clamping cradle for 10" tablets. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip® clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip®.
The X-Grip® cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Cradle Dimensions
Minimum Width = 6.25"
Maximum Width = 8.1"
Depth = 0.875"
Features:
Spring loaded cradle expands and contracts for perfect fit of your tablet
Rubber coated tips will hold your tablet firm and stable
Socket technology allows for multiple adjustment angles and articulation of your tablet
Easy access grip knobs, located on the back of the cradle for quick release of your tablet
Multiple mounting access points on the back of the cradle
Additional support keeper at the bottom of the cradle
Full access to all ports
Lifetime warranty
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
109.13 |
|
|
RAM Twist Lock Suction Cup Mount w/Universal X-Grip Cell Phone Holder
The RAM-B-166-UN7U consists of a 3.25" twist lock suction cup base, double socket system and universal spring loaded X-Grip holder for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip holder expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved.
Compatible Devices (WITH OR WITHOUT CASE):
Apple iPhone 6
Apple iPhone 5s
Apple iPhone 5c
Apple iPhone 5
Apple iPhone 4
Apple iPhone 4
Apple iPhone 3GS
Apple iPhone 3G
Apple iPhone
Apple iPod touch (All Models)
Apple iPod (G1-G5)
Samsung GALAXY S4
Samsung GALAXY S5
The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Holder Dimensions:
Minimum Width = 1.875"
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded holder expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable
5. Socket technology allows for multiple adjustment angles and articulation of device
6. Lifetime warranty
7. Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
55.51 |
|
|
Twist-Lock™ Suction Cup Mount w/Universal X-Grip® Large Phone/Phablet Cradle
The RAM-B-166-UN10U consists of a 3.3" diameter suction cup twist lock base, STANDARD length double socket arm and universal spring loaded X-Grip® cradle for large phones and phablets. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the mount to your optimum viewing position. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your phone or phablet.
The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Cradle Dimensions
Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
Features:
Rustproof
High strength composite and stainless steel construction
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Socket technology allows for multiple adjustment angles and articulation of device
Includes Tether for open cockpit and extreme environments
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
|
59.24 |
|
|
Double Twist-Lock™ Suction Cup Mount w/Tab-Tite™ Universal Spring Loaded Cradle f/Apple iPad 1-4 with or without Light Duty Case
The RAM-B-189-TAB3U consists of a double 3.3" twist lock suction cup base, double socket arm, round base adapter and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded Tab-Tite™ cradle makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended.
The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Cradle Dimensions:
Height: 8.5" to 11.125"
Width: 6.38" to 7.75"
Depth: 0.13" to 0.56"
Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. High strength materials maximize longevity of cradle
6. Full access to all ports
7. Lifetime warranty
8. Made in the U.S.A.
Material:
High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
1.8 lbs.
|
79.37 |
|