5/16" Backing Disk for Kraken Mounts - 2-Pack Specifications: Size: 5/16" Backing Disk Specifically for Kraken Mount 2-Pack

3/8" Backing Disk for Minn Kota Quest - 2-Pack Specifications: Size: 3/8" Backing Disk Specifically for Minn Kota Quest 2-Pack

304 Stainless Standoff 1.25" Base 5/16 x 18 Thread .75" Tall - 6-Pack Weld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating nutplates. All of the fasteners are mounted with our unique non-sag acrylic adhesives which hold the parts in place on a vertical or overhead surface providing a permanent high strength bond.

532-VW-RS 16' White VHF f/RUPP Mounts 10dB Gain ** Designed to be used with RUPP Antenna Mounts ** A favorite of marine professions, our largest VHF antennas offer the power and durability to achieve maximum range and extended performance, even in the roughest seas. A powerful gain of 10dB and solid construction make Digital Antenna's 16' VHF antennas the ideal choice for critical communication onboard large yachts, commercial vessels and base stations. Customers and installers love the 500 GOLD Series' easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors. All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. UPS shippable. 16' VHF antennas require a side support 3' to 4' from the base of the antenna Features: Pre-installed RUPP collar Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 10dB gain Cable: Includes 20’ of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable Mount: Standard 1"–14 threaded base (RUPP support arm required) Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MP Pumps 21588 SEAL BUNA 5/16

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand Nylon The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely All T-316 stainless. Version with 3-strand nylon line includes professional eye splice. Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.

Anchor Rode 15’ 5/16” G4 Chain with 300’ 1/2” Rope An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation. Features: High-strength, welded chain rated to high-test G4 specs  Hot-dip-galvanized chain links to minimize corrosion Calibrated for an even pitch Smooth rope-to-chain transition for seamless windlass operation Treated, windlass-grade, 3-strand, twisted nylon rope Fitted to all Lewmar windlasses and rope chain gypsies Works With: Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses Specifications: Rope: 300 ft. 1/2 in. 3-strand nylon  Chain: 15 ft. 5/16” G4 chain

Large Offset Trolling Motor Plate for Minn Kota’s Quest The Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement. Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Minn Kota’s RTA-55 Quick Release Bracket Backing disk from Sea Brackets or an alternative backing support system 1/4–20 tapered Phillips machine screws, fender washers, and lock nuts 3/8–16 Flathead Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

20" Straight Trolling Motor Plate for Minn Kota’s Quest The Sea Brackets 20" Straight Trolling Motor Mounting Plate, designed for the Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement. Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Minn Kota’s RTA-55 Quick Release Bracket Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 3/8–16 Flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

16-14 AWG Heat Shrink Ring Terminal - 5/16" Stud Size - 3 Pack Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use. Features: Tinned copper 600 Volts Operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Blue Wire AWG: 16-14 AWG Stud Size (inch): 5/16" Terminal Pad Width (inch): 0.48” Package Size: Three included

16-14 AWG Heat Shrink Ring Terminal - 5/16" Stud Size - 25 Pack Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use. Features: Tinned copper 600 Volts Operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Blue Wire AWG: 16-14 AWG Stud Size (inch): 5/16" Terminal Pad Width (inch): 0.48” Package Size: Twenty-five included

16-14 AWG Heat Shrink Ring Terminal - 5/16" Stud Size - 100 Pack Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use. Features: Tinned copper 600 Volts Operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Blue Wire AWG: 16-14 AWG Stud Size (inch): 5/16" Terminal Pad Width (inch): 0.48” Package Size: One-hundred included

8 AWG Heat Shrink Ring Terminal - 5/16" Stud Size - 25 Pack Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use. Features: Tinned copper 600 Volts The operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Pink Wire AWG: 8 AWG Stud Size (inch): 5/16" Terminal Pad Width (inch): 0.60” Package Size: Twenty-five included

22-18 AWG Heat Shrink Ring Terminal - 5/16" Stud Size - 3 Pack Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use. Features: Tinned copper 600 Volts Operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Red Wire AWG: 22-18 AWG Stud Size (inch): 5/16" Terminal Pad Width (inch): 0.48” Package Size: Three included

22-18 AWG Heat Shrink Ring Terminal - 5/16" Stud Size - 25 Pack Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use. Features: Tinned copper 600 Volts Operating temperature is -55°C to 125°C Highly compliant Benefits & Protections: Solid connections Extremely durable Long-lasting Tin-plated Easy to install Specifications: Color: Red Wire AWG: 22-18 AWG Stud Size (inch): 5/16" Terminal Pad Width (inch): 0.48” Package Size: Twenty-five included