White Vinyl Cover for Nightwave Designed specifically for the Nightwave camera with a tightening strap for a snug and secure fit, our vinyl slip-on covers provide long-lasting protection against water, dust, dirt, and UV rays. Choose black or white to match your vessel and protect your night vision investment when you’re docked and in long-term storage. This is a SIONYX official accessory.

Black Vinyl Cover for Nightwave Designed specifically for the Nightwave camera with a tightening strap for a snug and secure fit, our vinyl slip-on covers provide long-lasting protection against water, dust, dirt, and UV rays. Choose black or white to match your vessel and protect your night vision investment when you’re docked and in long-term storage. This is a SIONYX official accessory.

Flush Mount Rod Holder - 0 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl Liner These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place. Features: 316L stainless steel 1/2 in. threaded drain Specifications: Angle: 0-degrees Length: 9 in. Inner Diameter: 1-5/8 in.

Flush Mount Rod Holder - 30 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl Liner These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place. Features: 316L stainless steel 1/2 in. threaded drain Specifications: Angle: 30-degrees Length: 9 in. Inner Diameter: 1-5/8 in.

Flush Mount Rod Holder - 15 Degree & 9" Depth - Stainless Steel - Cast Gimbal - White Vinyl Liner These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place. Features: Safe, rounded bottom 316L Stainless Steel 1/2" pipe-threaded drain hole 9" tube Specifications: Angle: 15-degrees Inner Diameter: 1-5/8"  Outer Diameter: 2"  Cap (L x W): 4-1/2 x 3-5/8 inches

LL-C 5" Flush Cover f/Globemaster, Super Yacht & SuperSport Flush Mount Compasses - White Protective cover for Globemaster, Super Yacht and SuperSport flush mount compasses (must have low level lighting). For: FB-500, SF-500, SS-5000, SS-5000W, SY-500LL, and SY-500LLC Approx. Shipping Weight: 1lb

Ritchie N-203-C Compass Cover f/Navigator & SuperSport Compasses - White Protective cover for Navigator and SuperSport compasses. For: DNP-200, DNB-200, DNW-200, FN-201, FNW-201, FN-203, FNW-203, SS-2000, and SS-2000W Approx. Shipping Weight: 1lb (454g)

USB Waterproof Cover f/IPG100 The USB connection can be made waterproof with the purchase of the optional PX0852 USB waterproof cover, which completely covers the N2KView® Hardware License Key and engages the threads on the USB connector, creating a waterproof seal. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Director's Chair with Navy & White Cushion - Teak Features: Teak Director's Chair with Cushion Seat Covers Chair with Navy/White Stripe Seat Cushion Stainless steel hardware 18" high from floor to seat Folds for easy storage Oiled math Size: 23"W x 33-1/2"H x 17-1/2"D Folded: 16"W x 26-3/4"H x 9-1/2"D

7.7" ME-Series Speakers - Classic White Grille Covers - 250W Pioneer ME-series speakers (both Sports and Classic designs) are protected from the effects of sun and water exposure, meeting both IPX7 and ASTM D4329 certification to achieve all-weather reliability. Mica Reinforced IMPP monocoque cone with butyl rubber surround, constructed using an advanced in-mold bonding technique for superior water resistance while maintaining high quality, powerful sound. The symmetrical motor design with high strength suspension is optimized to provide stability, linearity and clear, low distortion sound reproduction. Lightweight polyimide (PI) tweeter diaphragm and uniquely shaped wave guide provides natural and clear vocals with wide dispersion. The TS-ME770FC 7.7″ Speakers come with sleek classic style grilles in a white finish that cosmetically integrate seamlessly into marine interiors and cabin designs. *Optional UD-ME770LED RGB LED Light Kit (Sold Separately) provides illumination of the woofer cone for an enhanced personalization and cosmetic integration. Features: 7.7" Two Way Coaxial System 13/16" (20mm) Dome Tweeter Built-in RGB LED Lighting Option Technical Specifications: Cone Material - Water-Resistant IMPP Sensitivity - 88dB Max Power - 250W 75 Watts RMS Cut-out Dimensions - 6-1/4" Mounting Depth - 3-1/8" In the Box: Two (2) - 2 way speakers Two (2) Classic White grilles Mounting hardware Installation manual ∗Sold as a pair

30 AMP SmartPlug/Twist Type Cordset w/White Inlet Cover - 50' For many years boaters have experienced the safety, security and simplicity of SmartPlug products on the boatside while still dealing with the same old issues created by legacy twist-type products on the dockside.   Those days are changing with the introduction of SmartPlug's new dockside product offering.  SmartPlug has applied decades of experience and customer feedback to create a product that allows you to upgrade your shore power connection with SmartPlug technology.  The 30 AMP 125 V cordset provides a complete weatherproof power solution. The cordset includes the SmartPlug connector for the Boatside and a Twist Type Plug connector for the Dockside. Features: Multi-Point Locking System - Side clips lock the body securely into the inlet, which eliminates any stress on the electrical connection from movement of the power cord. Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet. LED Power Indicator Light – On the top of all SmartPlug female ends, two LED indicator lights.  One Red and one Blue LED light for Safe/Unsafe Electrical Power Indication under Reverse Polarity Conditions. Tinned Wire – All SmartPlug marine cords have tinned wire to minimize corrosion. Quick and Easy Installation – Inlet mounting flange holes match existing inlet holes for an installation that is typically finished in 30 minutes. Technical Specifications: Length - 50' Cordset Color - Orange Inlet Color - White Boatside Connection - 30 AMP/125 V SmartPlug Dockside Connection - 30 AMP/125 V Twist Type Plug In the Box: 50' Cordset Inlet cover Instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Courtesy Light w/2' Lead Wire - White ABS Cover - Bimini Blue - 4-Pack An aesthetic solution to interior boat lighting. Beautifully light your boat's steps, coves, shelves and compartments with our high efficiency LED lights from the experts in marine lighting. Specifications: Size: 3.0" Length x 0.78" Width x 0.2" Height (76 x 20 x 5mm) Operating voltage: 10 - 30 Volts DC Current Draw: 60mA (single color lights) Output: Blue 4,000 mcd A low profile white ABS Cover 2' (600mm) of 20 AWG wire 40,000 hours of lamp life Edge emitting LED lights with 110° viewing angle UV Stabilized polycarbonate, with submersible enclosure 1-Year Warranty Made in the USA WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Courtesy Light w/2' Lead Wire - White ABS Cover - Great White - 4-Pack An aesthetic solution to interior boat lighting. Beautifully light your boat's steps, coves, shelves and compartments with our high efficiency LED lights from the experts in marine lighting. Specifications: Size: 3.0" Length x 0.78" Width x 0.2" Height (76 x 20 x 5mm) Operating voltage: 10 - 30 Volts DC Current Draw: 60mA (single color lights) Output: White 20,000 mcd A low profile white ABS Cover 2' (600mm) of 20 AWG wire 40,000 hours of lamp life Edge emitting LED lights with 110° viewing angle UV Stabilized polycarbonate, with submersible enclosure 1-Year Warranty Made in the USA WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Courtesy Light w/2' Lead Wire - White ABS Cover - Cool Red - 4-Pack An aesthetic solution to interior boat lighting. Beautifully light your boat's steps, coves, shelves and compartments with our high efficiency LED lights from the experts in marine lighting. Specifications: Size: 3.0" Length x 0.78" Width x 0.2" Height (76 x 20 x 5mm) Operating voltage: 10 - 30 Volts DC Current Draw: 60mA (single color lights) Output: Red 2,000 mcd A low profile white ABS Cover 2' (600mm) of 20 AWG wire 40,000 hours of lamp life Edge emitting LED lights with 110° viewing angle UV Stabilized polycarbonate, with submersible enclosure 1-Year Warranty Made in the USA WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

 Power Pole Cover f/Pro Series & Sportsman 8' Models Only Power Pole protective travel cover made of 1800 denier polyester PVC coated black fabric. The PVC coated inside assures that the cover will not scratch the finish while protecting the power pole from road debris while trailering. The cover fits securely over the power pole and attaches with a strap at the bottom without having a full length zipper to get gummed up with mud, muck and debris. Travel cover cannot be used when accessories are mounted on power pole. For Pro Series/Sportsman 8' power poles only.