|
Round Power Socket/Gauge Mounting Bracket
This round power socket/meter mounting bracket is designed for the external mounting of round power sockets and gauges 1-1/8" in diameter.
Features:
Fits all Sea-Dog® round power sockets, gauges, and meters
Constructed of injection-molded nylon
Installs with two #8 FH fasteners (not included)
|
3.17 |
|
|
Power Socket Rear Boot
This power socket rear boot protects wire connections and provides a finished appearance. Fits all Sea-Dog® round power sockets, gauges, and meters.
Features:
Constructed of PVC
Specifications:
Height: 1-7/8 in.
Outer diameter: 1-1/8 in.
Inner Diameter: 1/4 in.
Weight: 0.03
|
3.01 |
|
|
Round Power Socket - 12V
Stamped brass/injection molded nylon and ABS. 12 volts, 16 amps. Includes screws. Sea-Dog Line is a 3rd generation family company with a history of satisfied customers stretching back to the company's start in 1933. The company is the recipient of multiple industry awards for quality and efficiency.
Features:
Stamped brass/injection molded nylon and ABS
12V
16 Amps
Includes screws
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.42 |
|
|
2" Gauge Power Socket Adapter Mounting Plate
This instrument hole adapter is designed to install standard 1-1/8-in. gauges and meters into 2 in. instrument dash panel holes. The socket adapter is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind.
Features:
Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look
Constructed of UV-resistant injection-molded nylon
Specifications:
Face Plate Outer diameter: 2-3/16 in.
Face Plate Inner Diameter: 1-3/16 in.
Face Plate Thickness: 3/16 in.
Height: 2 in.
Washer Inner Diameter: 1-1/16 in.
Washer Thickness: 1/8 in.
Weight: 0.04
|
4.40 |
|
|
4" Gauge Power Socket Adapter Mounting Plate
This instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind.
Features:
Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look
Constructed of UV-resistant injection-molded nylon
Specifications:
Color: Black
Face Plate Outer diameter: 3-3/4 in.
Face Plate Inner Diameter: 1-3/16 in.
Face Plate Thickness: 3/16 in.
Height: 3-3/8 in.
Washer Inner Diameter: 1-1/16 in.
Washer Thickness: 1/8 in.
Weight: 0.06
|
7.79 |
|
|
4" Gauge Power Socket Adapter Mounting Plate - White
This instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind.
Features:
Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look
Constructed of UV-resistant injection-molded nylon
Specifications:
Color: White
Face Plate Outer diameter: 3-3/4 in.
Face Plate Inner Diameter: 1-3/16 in.
Face Plate Thickness: 3/16 in.
Height: 3-3/8 in.
Washer Inner Diameter: 1-1/16 in.
Washer Thickness: 1/8 in.
Weight: 0.06
|
7.79 |
|
|
12V Power Socket with Blue LEDs
The LED power socket adds power easily, almost anywhere. Two blue LEDs light up the interior.
Features:
Constructed of injection-molded nylon and ABS with stamped brass contacts
Installation is as easy as drilling a 1-1/8 in. hole, inserting the socket body, tightening the locking nut, and connecting the wires
Also fits the Sea-Dog Power Socket Shell (426100) and Mounting Bracket (426105)
IP65 rating
Specifications:
Input: 12-24VDC. 16A.
Diameter: 1-7/16 in.
Length: 1-9/16 in.
Height: 1-1/16 in.
Volts: 12-24
LEDs: 2
LED Color: Blue
Weight: 0.08 lb.
|
6.65 |
|
|
12V Power Socket & Cap
Stamped Brass/Injection Molded Nylon & ABS.
Power Socket with Plug easily adds 12V power almost anywhere. Constructed of injection molded nylon and ABS socket with stamped brass plug contacts. Installs with two #8 FH fasteners (not included). Maximum: 12VDC, 16A. Cap and plug may be included or sold separately.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
6.98 |
|
|
Round Dual USB & USB-C Power Socket
USB & USB-C Power Socket charges two devices simultaneously. The total output 4.8A load is split 2.4A per side as needed. USB-C features Power Delivery (PD) for faster and more flexible charging. Enough power to charge phones, pads, and tablets quickly and efficiently. A protective dust cap extends the life of the charger.
Features:
Constructed of injection molded nylon
Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires
Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105)
Blue LED illumination
IP65 rating
CE and RoHS compliant
Specifications:
Output DC: 5V/4.8A
Input 8-32VDC
USB-C Watts: 60W@24V
USB Watts: 36W@12V
Plug-In Side Diameter: (inch) 1-7/16"
Length: (inch) 1-1/2"
*Sold as an Individual
|
20.86 |
|
|
Round USB & USB-C Power Socket with Hidden Voltmeter
USB 3.0 & USB-C Power Socket with Voltmeter charges two devices simultaneously while the LED screen displays voltage status. The total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. A protective dust cap extends the life of the charger.
Features:
LED volt meter reads voltage up to 14.6 volts
Includes an On/Off button to conserve battery power when not in use
Constructed of injection molded nylon
Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires
Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105)
Blue LED display
IP65 rating & RoHS compliant.
Specifications:
Output DC: 5V/6A
Input: 8-32VDC
USB-C Watts: 60W@24V
USB Watts: 36W@12V
Plug-In Side Diameter: (inch) 1-7/16"
Length: (inch) 1-1/2"
*Sold as an Individual
|
28.93 |
|
|
Round Rainbow Voltmeter with USB & USB-C Power Socket
Rainbow Volt Meter with USB 3.0 & USB-C Power Socket charges two devices simultaneously while the rainbow dial displays voltage status. The total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. A protective dust cap extends the life of the charger. The rainbow display gives the user quick, visual, color-coded voltage information. Includes an On/Off button to conserve battery power when not needed.
Features:
Red/orange means the voltage is too low
Green means voltage is normal
Rainbow volt meter reads voltage up to 14.6 volts
Constructed of injection molded nylon
Installation is as easy as drilling a 1-1/8” hole, inserting the socket body, tightening the locking nut, and connecting the wires
Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105)
RoHS compliant & IP65 rating
Specifications:
Output DC: 5V/6A
Input: 8-32VDC
USB-C Watts: 60W@24V
USB Watts: 36W@12V
Plug-In Side Diameter: (inch) 1-7/16"
Length: (inch) 1-1/2"
*Sold as an Individual
|
33.66 |
|
|
Round USB & USB-C Power Plug with Voltmeter
USB 3.0 & USB-C Power Plug with Volt Meter charges two devices simultaneously while the LED screen displays voltage status. Can be used on a boat, car, or RV. The total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging.
Features:
This portable version fits all Sea-Dog® Power Sockets and any standard 12V receptacle
Constructed of aluminum and injection molded nylon
Blue LED display
FCC, CE, RoHS compliant
Specifications:
Output DC: 5V/6A
Input: 8-32VDC
USB-C Watts: 60W@24V
USB 3.0 Watts: 36W@12V
Plug-In Side Diameter: (inch) 1-1/4"
Length: (inch) 2-1/2"
*Sold as an Individual
|
24.22 |
|
|
Round Red Dual USB Charger with 1 Quick Charge Port +
This dual USB power socket (Red) is capable of charging two devices simultaneously. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently.
Features:
A protective dust cap extends the life of the charger
Constructed of aluminum and injection-molded nylon with terminal spade contacts
Installation is as easy as drilling a 1-1/8 in. hole, inserting the socket body, tightening the locking nut, and connecting the wires
Machined round aluminum with no D flats
Also fits the mounting bracket (426105)
IP65 rating
Specifications:
Output DC: 5V/4.8A.
Input: 9-32VDC.
Diameter: 1-7/16 in.
Length: 1-1/2 in.
Height: 1-1/8 in.
Volts: 9-32
Finish: Red anodized
Weight: 0.06 lb.
|
26.64 |
|
|
Dual USB Socket/Voltmeter with Hidden Display
This Dual USB Socket allows for two devices to be charged simultaneously while also displaying the batteries output. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Also fits Sea-Dog® Power Socket Shell 426100. Output DC 5V/4.8A. Input 12-24VDC. Red LED display. IP65 rating.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.68 |
|
|
Rail Mount Bracket for Flagpole - Round - 7/8"-1"
Round Rail Mount Bracket is for use on 7/8" and 1" tubing. Constructed of corrosion resistant UV stabilized injection molded nylon. Installs with two RH fasteners and nuts (included). Accommodates Sea-Dog® Round Flagpoles (328112-1 and 328114-1). Maximum speed 10 MPH.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
10.22 |
|