Bilge Pump Water Alarm Panel with Switch This bilge pump water alarm panel with a switch provides both an audible and visual means of warning that the water level in your bilge is above your bilge pump float switch level. There is no need for a separate bilge pump switch, as the control switch selects between the automatic and manual (momentary on) functions of the bilge pump. Features: 20A fuse holder Constructed of injection molded ABS Installs with a gasket and four RH fasteners (included) Specifications: Length (inch): 4-11/16" Width (inch): 2-3/8" Width Between Fasteners (inch): 1-1/2" Length Between Fasteners (inch): 3-7/8" Volts: 12 Weight: 0.33 lb. Color: Black

Splash Guard Bilge Pump Panel with Circuit The Splash Guard Bilge Pump Panel features a splash guard switch cover making this panel ideal for applications where the front might be subjected to light spray or water (NOT designed for total water immersion). This deluxe version features a three-way switch allowing both automatic and manual switching of the bilge pump. When operated in Manual mode, a red LED light is activated. When in Automatic mode, a green LED light is activated. The panel is designed so the words “Bilge Pump" will illuminate when back lit, allowing for easy location and operation at night. UL listed 20A circuit breaker included. Additional breaker sizes available (420805-420830). Constructed of injection molded ABS for maximum durability and corrosion resistance. Installs with four #6 RH fasteners (not included).

Double USB & Power Socket Panel with Breaker Switch  This injection molded nylon power socket panel accommodates both USB connectors as well as standard power sockets. The dual USB power socket charges two devices simultaneously. Input 12V–24V. Single output DC 5V/2.4A. Total output is 4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. The power socket is rated at a maximum of 12V/16A. Protective dust caps extend the life of the charger. Includes mounting screws and electrical connectors. Includes 16A breaker switch. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Water Resistant Toggle Switch Panel with USB Power Socket - 5 Toggle  Water Resistant Toggle Switch Panel is constructed of injection molded ABS and polycarbonate. Features five 15A 12VDC toggle switches with blue LED indicator lights, blue LED lighted double USB power socket, ATC fuse holders, and decal sheet. USB power socket output is 4.8A, 2.4A per side. Rated IP66. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Water Resistant Toggle Switch Panel with LED Power Socket - 3 Toggle  Water Resistant Toggle Switch Panel is constructed of injection molded ABS and polycarbonate. Features three 15A 12VDC toggle switches with blue LED indicator lights, blue LED lighted power socket, ATC fuse holders, and decal sheet. Rated IP66. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Water Resistant Toggle Switch Panel with LED Power Socket - 5 Toggle Water Resistant Toggle Switch Panel is constructed of injection molded ABS and polycarbonate. Features five 15A 12VDC toggle switches with blue LED indicator lights, blue LED lighted power socket, ATC fuse holders, and decal sheet. Rated IP66. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3 Way Bilge Pump Control Switch panel that gives full control of your equipment. Just push the button for manual or automatic bilge pumping. The automatic feature operates in combination with the automatic bilge switches or the electronic float switch. The three-position switch panel in matte black finish has an integrated fuse holder and operating light. Fuses included. Size: 73 mm/2.99" x60 mm/2.17", 40 mm/ 1.57" depth.

2 Way Bilge Pump Control Switch panel that gives full control of your equipment. Just push the button for manual or automatic bilge pumping. The automatic feature operates in combination with the automatic bilge switches or the electronic float switch. The three-position switch panel in matte black finish has an integrated fuse holder and operating light. Fuses included. Size: 73 mm/2.99" x60 mm/2.17", 40 mm/ 1.57" depth.

Splash Guard Circuit Breaker Panel - 6 Circuit The Splash Guard Vertical 6-Gang Breaker Rocker Switch Panel features six 15A 12VDC illuminating SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Additional sizes available (420805-420810). Individual circuit 10A max. 37A total. The addition of splash guard switch covers make this panel ideal for use where thel front might be subject to light spray or water (NOT designed for total immersion). These fire resistant panels are suitable for use in engine room compartments. Includes a mounting gasket and a sheet of 20 preprinted decals to customize to your specific application. Constructed of injection molded nylon. Installs with six #6 RH fasteners (not included). 12VDC.

Splash Guard Switch Panel Vertical - 4 Switch The Splash Guard Vertical 4-Gang Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four fuse holders for use with standard AGC 1/4” x 1-1/4” glass style fuses. Individual circuit 10A max. 37A total. The addition of splash guard switch covers make this panel ideal for use where the front might be subject to light spray or water (NOT designed for total immersion). These fire resistant panels are suitable for use in engine room compartments. Includes a mounting gasket and a sheet of 20 preprinted decals to customize to your specific application. Constructed of injection molded nylon. Installs with four #6 RH fasteners (not included). CE compliant. 12VDC. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Splash Guard Switch Panel Vertical - 6 Switch The Splash Guard Vertical 4-Gang Rocker Switch Panel features six 15A 12VDC illuminated SPST On/Off rocker switches and six fuse holders for use with standard AGC 1/4” x 1-1/4” glass style fuses. Individual circuit 10A max. 37A total. The addition of splash guard switch covers make this panel ideal for use where the front might be subject to light spray or water (NOT designed for total immersion). These fire resistant panels are suitable for use in engine room compartments. Includes a mounting gasket and a sheet of 20 preprinted decals to customize to your specific application. Constructed of injection molded nylon. Installs with six #6 RH fasteners (not included). CE compliant. 12VDC.

Jabsco Water Puppy 12V FEATURES Pump Body: Bronze Port Size: 1/2" Internal Pipe Threads, 1" External Hose Barb Adapter for 3/4" External Garden Hose Thread included Flow: 23.8 Litres/min (6.3 USgallons/min) Impeller: Neoprene or Nitrile Shaft Seal: Lip Type Shaft: Stainless Steel Motor: 12V Permanent magnet type, fully enclosed, stainless steel shaft. Motor meets USCG Electrical Standards 183.410 and ISO 8846 MARINE for IGNITION PROTECTION on gasoline powered vessels.     APPLICATIONS / CHARACTERISTICS Small bilge debris present no problem to these bronze bodied, flexible impeller pumps. Simple design means fewer wearing parts. Use for bilge pumping, livewell circulation, washdown and general pumping requirements. If bilge water contains significant amount of oil, use the oil resistant nitrile model.     Jabsco Water Puppy 12V, Up To 6.3GPM with Nitrile Impeller  

500 GPH Cartridge Combo Series 12V Combines the line of cartridge bilge pumps with automatic operation. Equipped with a non-clogging electronic float switch. CE-Approved Features: Compact, all-in-one motor/impeller unit No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Pump Body: Thermoplastic Shaft Seal: Lip seal Shaft: Stainless steel (SS2343) Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 33 l/min - 525 GPH Capacity straight (13.6 V): 40 l/min - 630 GPH Amperage: 2.5 A Fuse Size: 5 A Connection: 3/4"

Automatic Switch AS888 For full automatic bilge pumping operation, connect the automatic switch to your bilge pump. The AS888 automatic switch has a time-proven micro switch without mercury. When water exceeds the acceptable level, the pump is turned on by a rolling steel ball, which changes the pressure on the micro switch. The AS888 attaches to any SPX Johnson Pump Marine bilge pump through the clip on "T-slot" and can be used with 6, 12, 24 or 32 V systems. Use AS888 for a better and safer life afloat!

Water Resistant Toggle Switch Panel  Water Resistant Toggle Switch Panel is constructed of injection molded ABS and polycarbonate. Features six 15A 12VDC toggle switches with blue LED indicator lights, ATC fuse holders, and decal sheet. Rated IP66. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.