|
Pro Model Stretch 14" Single Strap
The Pro Model Rod Savers are designed to keep rods at the ready so they're within easy reach. The Pro Series is longer than the Original Rod Saver and includes a durable elastic band to accommodate more rods. Holds up to 8 rods. Includes a set of stainless steel mounting screws.
|
13.00 |
|
|
Pro Model Stretch 12 Inch Single Strap
The Pro Model Rod Savers are designed to keep rods at the ready so they're within easy reach. The Pro Series is longer than the Original Rod Saver and includes a durable elastic band to accommodate more rods. Holds up to 7 rods. Includes a set of stainless steel mounting screws.
|
12.60 |
|
|
Pro Model Stretch 14" & 8" Set
The Pro Model Rod Savers are designed to keep rods at the ready so they're within easy reach. The Pro Series is longer than the Original Rod Saver and includes a durable elastic band to accommodate more rods. Includes a set of stainless steel mounting screws.
|
17.17 |
|
|
Original Rod Holder 10" Single Strap
The Original Rod Saver 10 Inch strap is still hard to beat when it comes to keeping fishing rods in the boat and out of the water. This single strap model includes stainless steel mounting hardware
|
10.50 |
|
|
Vinyl Model 10" Strap
Vinyl Rod Savers are more durable and weather-resistant. They prevent hooks from embedding and damaging rods. Sleek black vinyl adds durability with a bit of style for a more professional rod display. Holds up to 6 rods.
|
20.09 |
|
|
Vinyl Model 12" Strap
Vinyl Rod Savers are more durable and weather-resistant. They prevent hooks from embedding and damaging rods. Sleek black vinyl adds durability with a bit of style for a more professional rod display. Holds up to 7 rods.
|
21.66 |
|
|
Winch Strap Replacement with Safety Strap - 2" x 16'
2" x 16' Replacement winch strap with 30" safety strap and 3,970 lb. drop forged snap hook. The winch strap is constructed of 7,000 lb. polyester belt and 6,600 lb. drop forged snap hook. Includes a bolt and nylon lock nut for drum installation.
|
18.59 |
|
|
Winch Strap Replacement with Safety Strap - 20'
20' Replacement winch strap with 30" safety strap and 3,970 lb. drop forged snap hook. The winch strap is constructed of 7,000 lb. polyester belt and 6,600 lb. drop forged snap hook. Includes a bolt and nylon lock nut for drum installation.
|
21.73 |
|
|
Wave WiFi products have been providing long-range Internet connectivity to fisherman, cruisers and sailors worldwide. Select Wave WiFi products are currently on sale at CLR Marine while supplies last. Don't miss out on these super savings!
NEW PRODUCT - EC-HP & EC-ER Dual Band Models
Wave WiFi's EC-ER and EC-AP-ER Dual Band Models produce a whopping 800mW of output power providing extended range connections to good quality HotSpots. The ER Dual Band models have all of the features and elements of the EC-Series that have made Wave WiFi so popular for convenience and dependability. All ER Dual Band Models ship with the latest firmware version of Wave WiFi's proprietary web-based interface.
Wave WiFi's EC-HP and EC-AP-HP Dual Band Models produce the highest allowable output power of 1 Watt providing long-range connections to good quality HotSpots. The EC-HP Dual Band Model supplies maximum receive sensitivity (-97dBm @ 1-11mbs G). Both HP Dual Band Models support MIMO technology with the optional second external antenna package and factory MIMO activation.
NEW PRODUCT - Rogue Pro Dual Band
The Rogue Pro Dual Band features the same trouble free, high powered performance of the Rogue Wave in a sealed, polished stainless steel case. The Rogue Pro Dual Band has an integral 1″-14 ready base for numerous standard marine antenna mounts.
Specials Closeouts Remanufactured Rebates
|
|
|
Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.
The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces!
For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.
SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html
Specials Closeouts Remanufactured Rebates
|
|
|
Pro Model Stretch 12" & 6" Set
The Pro Model Rod Savers are designed to keep rods at the ready so they're within easy reach. The Pro Series is longer than the Original Rod Saver and includes a durable elastic band to accommodate more rods. Includes a set of stainless steel mounting screws.
|
16.55 |
|
|
Poly Rod Strap
The Poly Rod Strap is the best designed and highest quality of any rubber rod holding device on the market. These straps are molded of black polyurethane material that will retain its stretch an remain unaffected by sunlight and most chemicals.
|
8.95 |
|
|
Power Pole Cover f/Pro Series & Sportsman 8' Models Only
Power Pole protective travel cover made of 1800 denier polyester PVC coated black fabric. The PVC coated inside assures that the cover will not scratch the finish while protecting the power pole from road debris while trailering. The cover fits securely over the power pole and attaches with a strap at the bottom without having a full length zipper to get gummed up with mud, muck and debris. Travel cover cannot be used when accessories are mounted on power pole. For Pro Series/Sportsman 8' power poles only.
|
68.11 |
|
|
GP2170-14 SystemPod Pre-Cut for Raymarine eS95/eS97/eS98 & 4 Instrument Holes (3.6" Hole) for 12" Wide Guard
NavPod GP2170 Series for 12" Guard, SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. The single bend AngleGuard for this model is the AG218.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
462.53 |
|
|
Trolling Motor Saver Set for Deep V Boats
Specially designed for deep "V" boats with extra long trolling motor shafts. Designed with two straps, the longer strap is mounted where the trolling motor shaft fastens to the mounting bracket and can mount 24" above the deck. The second strap is designed to hold down the actual motor. It wraps around the entire mounting bracket, and the trolling motor shaft, helping to keep the motor from bouncing when traveling down the lake. Keep your trolling motor tied down securely and undamaged for longer life.
Adjustable 9" to 24".
|
19.69 |
|