|
Kite Block - Black w/White Sheave
Features:
Lightweight durable construction
Economical
Maintenance free
Applications:
Vang, cunningham and trapeze retriever systems on dinghies
Leech line tackles, bunk adjusters etc on larger yachts
Materials:
U.V. stabilized Acetal sheaves
Nylon cheeks
Specifications:
Sheave Ø:16mm(5/8")
Max. Rope Ø:4mm(5/32")
|
11.30 |
|
|
A-Series Low Power Black Housing/White Light - Pair
RIGID’s A-Series LED Accessory Light is the universal light that can be used just about anywhere. Vehicle cabs, boat cabins, work vehicle beds, under the hood of a vehicle and trunks are just a few of the places where the A-Series can provide handy bright lighting in otherwise dark environments.
The A-Series has a durable compact aluminum housing and includes rubber flat-mount, 3M™ VHB™, 2 way pad for flat mounting, and radius tube-mount adapters, which provide side or bottom wire exits to accommodate different applications. It is lightweight, waterproof, and available in a variety of different LED colors in high and low power versions.
The versatility of the A-Series makes it an easy installation on almost anything.
Features:
Low Power and High Power Options
Epoxy Sealed No Vent
24" Molded Wire Ingress
IP68 Compliant -Dust / Water Ingress
50,000+ Hour Lifespan
10-28 V DC
Technology
Impact Resistant Polycarbonate Lens
Integrated Thermal Management System
In the Box:
Mounting Hardware
2 Mounting Hole Rubber Plugs1 Adhesive Primer
1 VHB Mount Tape
1 Flat Mount Adapter
1 Tube Mount Adapter
3ft. Wire Extension
2-Wire Open Lead, No Connector
∗ Sold as a Pair
|
120.00 |
|
|
TACO Flex Vinyl Rub Rail Kit - Black w/White Insert - 50' -
1-1/4" x 15/16"
Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide.
Features:
Vinyl
Rub Rail Kit
Black with White Insert
50'
1-1/4" x 15/16"
|
369.42 |
|
|
4" Tachometer Euro Style Black with White Letters 4000RPM Diesel Mechanical Take Off & Variable Ratio Alt.
Features:
4" Tachometer Euro Style Black with White Letters
4000RPM
Diesel Mechanical Take-Off & Variable Ratio Alt.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
89.84 |
|
|
Flex Vinyl Rub Rail Kit - Black with White Insert - 50' - 1-1/16" x 11/16"
Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide.
Features:
50'
Vinyl
Rub Rail Kit
1-1/16" x 11/16"
|
270.28 |
|
|
Barbados Courtesy Accent LED Light - Black with White Light
Originally engineered for military application, our robust, high-output Barbados light is popular with marine and industrial customers alike because of its amazing performance and clean lines. Extremely durable composite housing. Smooth rounded profile to avoid snagging pant cuffs, lines, or clothing, Barbados is the ideal for lighting toe kicks on stairwells and deck steps.
Specifications:
Lumens (White): 45
Voltage: 10-16V DC
12V DC Amps: 45mA
24V DC Amps: N/A
Rated Watts: 0.55
CCT: 5000
CRI: 70+
Op. Temp F/C: -31/35 to +131/55
Timed Toggled Protocol (TTP): No
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Height: 1.28" (3.25cm)
Width: 1.81" (4.60cm)
Depth: 0.52" (1.33cm)
Diameter: N/A
|
17.60 |
|
|
Wire Block - Tubular Rivet Head w/Nylatron® Sheave - 25mm Sheave Diameter
Wire blocks have purpose designed narrow sheaves and grooves.
Applications:
Wire blocks suit halyards, vang and backstay applications
Materials:
Grade 316 stainless steel cheeks
Nylatron® sheave
Specifications:
Sheave Ø: 25mm(1")
Max. Cable Ø: 3mm(1/8")
M.W.L:450kg(990lbs)
B.L.: 900kg(1,980lbs)
Weight: 40kg(1.4oz)
|
18.02 |
|
|
Single Lead Block - 19mm(3/4") Sheave Diameter
Lead blocks are a low profile solution for leading halyards or other rig sail controls back to cleats or jammers.
Applications:
Typically used in dinghy spars for control lines
Materials:
U.V. stabilized Acetal sheave
Grade 316 stainless steel load housing
Sheave Ø: 19mm(3/4")
Max. Rope Ø: 8mm(5/16")
Fastener Ø: 5.0mm(3/16")
M.W.L.: 250kg(550lbs)
B. L.: 550kg(1,100lbs)
Weight: 20g(0.7oz)
|
12.61 |
|
|
C-Cleat Cam Cleat - Small - Black w/Black Base
2-8mm(3/32" - 5/16") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.
Features:
Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance
Cam profile and multi-coil spring minimise line entry and release effort
Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion
Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
20.64 |
|
|
C-Cleat Cam Cleat - Medium - Black w/Black Base
3-12mm(1/8" - 1/2") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.
Features:
Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance
Cam profile and multi-coil spring minimise line entry and release effort
Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion
Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
22.25 |
|
|
Shock Cord w/Double Roller (Pair)
Our Shock Cord with Double Pulley Block easily attaches to your boat and helps provide consistent tension to the halyard lines. With a double roller system, dual rigging and smooth halyard movement is a snap.
Features:
12" of shock cord
Shrink wrapped ends
Corrosion-resistant hook clasps
Sold in pairs
1-year limited warranty
|
32.80 |
|
|
SR-L Series Surface Mount Spreader Light - Black Housing - White Halo
The RIGID SR-L Series Spreader light provides an easy way to add convenient area lighting and style to any vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any vehicle.
The halo backlighting is available in one of four colors: red, blue, amber, or white.
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your vehicle’s electrical system or purchase the RIGID wiring harness separately (Part #40300 - Sold Separately.)
The SR-L Series Spreader offers the same legendary RIGID build quality as the rest of RIGID’s products, from the high-grade aluminum housing to the impact resistant polycarbonate lens. Packed with power and style, the SR-L Series makes it easier than ever to Own the Night.
Features:
9-36 VDC
Pressure Equalizing Valve
High Impact Polycarbonate lens
Dedicated Wire to Run Backlight
Removable Surround for Color Matching
Wiring Harness Sold Seperately #40300
Halo Backlight Available in Blue, Red, White, & Amber
Surface Mount and Flush Mount Available
120 Degree Wide Beam Pattern
No Exposed Hardware
High Grade Aluminum Alloy Housing and Heatsink
∗ Sold as a Pair
|
243.74 |
|
|
SR-L Series Flush Mount Spreader Light - Black Housing - White Halo
The RIGID SR-L Series Spreader light provides an easy way to add convenient area lighting and style to any vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any vehicle.
The halo backlighting is available in one of four colors: red, blue, amber, or white.
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your vehicle’s electrical system or purchase the RIGID wiring harness separately (Part #40300 - Sold Separately.)
The SR-L Series Spreader offers the same legendary RIGID build quality as the rest of RIGID’s products, from the high-grade aluminum housing to the impact resistant polycarbonate lens. Packed with power and style, the SR-L Series makes it easier than ever to Own the Night.
Features:
9-36 VDC
Pressure Equalizing Valve
High Impact Polycarbonate lens
Dedicated Wire to Run Backlight
Removable Surround for Color Matching
Wiring Harness Sold Seperately #40300
Halo Backlight Available in Blue, Red, White, & Amber
Surface Mount and Flush Mount Available
120 Degree Wide Beam Pattern
No Exposed Hardware
High Grade Aluminum Alloy Housing and Heatsink
∗ Sold as a Pair
|
202.50 |
|
|
LED Docking Lights - Stainless Steel - White LED - Pair
Compared to its 55-watt halogen competition, the Attwood Surface Mount LED Docking Light draws a fraction of the power while producing a brighter output. The Attwood product also transmits light in a much broader pattern as opposed to a narrow beam generated by today’s competitors. Simply put, Attwood’s docking light performs like a true “docking light” instead of a narrow-beam headlight.
Power draw and performance are important, but what about assembly? At 1.2" thick, the lights are designed to be mounted directly to the surface of the hull. With only a small hole for wiring and three (3) screws for attachment, Attwood’s surface mount design makes installation quick and ncomplicated. This new LED Docking Light allows for fewer hull cuts and minimal intrusion while producing results that are reliable and attractive.
Backed by a 10-year warranty, Attwood’s LED Docking Light is designed and tested for extreme conditions. Attwood used only the highest grade Stainless Steel and aluminum components to ensure the product is resistant to corrosion. The rubber gasket provided creates a barrier that protects your hull from water entry, ensures the light is watertight and keeps all electrical components fully sealed.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
134.71 |
|
|
15' Telescoping Fiberglass Outrigger Poles - 1-1/8" O.D. - White/Blue - Pair
Features:
An economical alternative to aluminum outriggers for 18' to 28' boats
15' telescoping, three-section, heavy duty fiberglass outriggers feature heavy line guides for easy rigging
Retracts to less than 6'
|
101.08 |
|