Toggle Pin - 25.4mm(1") Length 6.4mm(1/4") Diameter Grade 316 Stainless Steel

Toggle Pin - 19mm(3/4") Length 6.4mm(1/4") Diameter Grade 316 Stainless Steel

Toggle Pin - 12.7mm(1/2") Length 6.4mm(1/4") Diameter Grade 316 Stainless Steel

Clevis Pin - 6.4mm(1/4") x 13mm(1/2") Grade 316 Stainless Steel 10 Pack

Toggle Pin - 15.9mm(5/8") Length 6.4mm(1/4") Diameter Grade 316 Stainless Steel

Halyard Shackle - 6.4mm(1/4") Pin Halyard Shackles have a lever action for easy opening and closing, with a keyed pin for positive locking Features: High strength to weight ratio Grade 316 stainless steel bodies and pins

Transom Gudgeon - 6.4mm(1/4") Pin/Hole Stainless Steel Rudder Hardware

Clevis Pin - 12.7mm(1/2") x 25.5mm(1") Grade 316 Stainless Steel

Groco K-3-P Monel Pin, .25 X 2.75  

Standard Dee Shackle - 6.4mm(1/4") Pin Features: High strength to weight ratio Grade 316 stainless steel bodies and pins

Pacific Piston Hank - 6.4mm(1/4") Wire Piston hanks includes screws. Applications: Suitable for Keelboat, Dinghy and Trailerable yacht jibs Materials: Impact resistant, U.V. stabilized Nylon Brass Piston

D-SPLICER Kit w/4 Needles & 2mm-4mm(1/16"-5/32") Line D-SPLICER is a range of specialised rope splicing needles for sailors and riggers. They are specifically designed for use with modern synthetic fibres and rope constructions, in particular small line sizes where conventional fids/needles don't work. Features: "Pull-through" operation Unique double needle clamps the line making it easy to pull through Ideal for making "soft shackles" Ideal for pulling cover plaits into the core for making tapered sheets Sizes available for lines from 2mm (1/16") diam. to 8mm (5/16") diameter Kit Includes: Machined alloy handle, with anchoring loop 4 interchangeable needles (2 sizes) Storage tube WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

F15 Splicing Needle w/Puller - Small 2mm-4mm(1/16"-5/32") Line A range of specialised rope splicing needles for sailors and riggers. They are specifically designed for use with modern synthetic fibres and rope constructions, in particular small line sizes where conventional fids/needles don't work. Features: "Pull-through" operation Unique double needle clamps the line making it easy to pull through Ideal for making "soft shackles" Ideal for pulling cover plaits into the core for making tapered sheets Sizes available for lines from 2mm (1/16") diam. to 8mm (5/16") diameter Fixed handle with wire running around full length for maximum strength

Swivel Shackle - 1/4" Pin - 1-21/32"L x 19/32"W Features: Coined head pin 6.4mm(1/4") Diameter Pin Grade 316 Stainless Steel bodies and pins

Shock - 3/16" Line - 1/4" Webbing - Blue - Pair The Sheaveless Black The obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block. Ultimate durability With no moving parts SHOCKS provide ultimate durability and are maintenance free. They are ideal where sand and grit would compromise a bearing system or where regular flushing out isn?t possible. Their gentle 3-dimensional geometry is kind on lines, but is strong enough to cope with poor leads. Soft attachment specialists SHOCKS are designed primarily for 'soft attachment'; spliced to a line end or lashed in place. The elongated attachment aperture is also ideal for webbing attachment, ensuring the intended orientation is maintained. Virtually limitless applications The applications for SHOCKS are virtually limitless, including numerous high performance dinghy and small sailboat rigging applications including tweakers, vangs, trapezes, cunninghams, barber haulers and kite bridles. They are also handy on larger boats for uses such as lazy jacks, sail covers, tie-downs, ladder and motor hoists. Hidden performance At a mere 2.5g (0.1 oz), SHOCKS are outstanding performers in the strength and weight stakes. The clever design and exacting finishing also provide excellent free running at moderate changes of angle. Small & hi-tech line specialists SHOCKS accept lines from 1.4mm (1/16") up to 8mm (5/16") and function just as well with hi-tech uncovered braids as with traditional double braids. Features: Performance & versatility Ultra lightweight Ultra compact Durable Color coded Impact resistant Small line optimised High load capacity Poor alignment tolerant Soft attachment compatible Grit & salt resistant Applications: Unlimited uses, including kitesurfing, paragliders, sports kites, power kites, stunt kites, depower kites, traction kites, for deflection or purchase system on control lines Materials: Anodized Aluminum Specifications: Rope Ø:1.4mm-5mm(1/16" - 3/16") Height:8.5mm(5/16") Width: 14.9mm(9/16") Length:22.9mm(7/8") M.W.L.:175kg(385lbs) B. L.:350kg(770lbs) Weight:2.5g(0.01oz)