Pendant Switch Kit Don't want to drill a hole in your vehicle to mount a switch? Use our new Pendant Switch! Also great for powersports applications! Ultra-durable, waterproof, dust-proof and impact resistant. LED on/off indicator light. Kit includes switch, VHB mounting tape and radius mount pad for bar mounting. 24" length from end to end.

Lighted Rocker Switch This Switch features a lighted rocker with protective rubber boot and is a great addition to any RIGID Industries lighting system. This switch will fit all RIGID Industries wiring harnesses. This product requires a 3/4" hole to mount. Features: Lighted for Better Visibility Water Resistant Protective Rubber Boot Works with All RIGID Industries Wiring Harnesses

Radiance Bar Multi-Trigger Harness The Rigid Industries’ Radiance™ Multi-Trigger Harness was designed specifically for the Rigid Industries’ Radiance Pod Set. Equipped with two independent circuits for an easy install, circuit one is designed for the primary LED’s on the Radiance Pod while circuit two is designed for the backlighting circuit on the Radiance Pod.  The Radiance Multi-Trigger Harness also comes standard with two separate backlit LED rocker switches (red and blue), so each circuit can be used independently. The Radiance Multi-Trigger Harness makes installation of your Rigid Industries’ Radiance Pod Set as simple and clean as possible. ∗ Sold as an Individual

Wire Harness - High Power f/40" - 50" Light Bar This 13' wiring harness is designed to connect a single 40"-50" LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: 50" E-Series, 50" SR-Series. Features: 14 AWG Wire Deutsch Connector Inline Fuse Holder

Wire Harness f/10"-30" Light Bar This 11' wiring harness is designed to connect a single 10"-30" LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: 10" E-Series, 10" SR-Series, 20" E-Series, 20" SR-Series, 30" E-Series, 30" SR-Series, 40" E-Series, 40" SR-Series. Features: 16 AWG Wire Deutsch Connector Inline Fuse Holder 12 Volt Relay

Wire Harness f/4"-6" Light Bar This 11' wiring harness is designed to connect a single LED light to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: Dually (Single), D2 (Single), 4" E-Series, 6" E-Series, 4" SR-Series, 6" SR-Series. Features: 18 AWG Wire Deutsch Connector Inline Fuse Holder

Wire Harness f/Dually Pair This 14' wiring harness is designed to connect a pair of Dually LED lights to your 12V electrical system. It features battery terminals on one end and Deutsch connectors on the other to connect to the lights. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: Dually (Pair). Features: 18 AWG Wire Deutsch Connector Inline Fuse Holder

SR-Q PRO Back Up Light Kit - Surface Mount Diffused - Pair - Black This lighting kit includes everything you need to install a pair of RIGID Industries back-up lights on your vehicle: Two LED lights, and extended 25' wiring harness hardware and black covers. This kit features our patented Hybrid optics system combined with a Diffused lens, to offer a powerful 60deg beam pattern for unmatched visibility. Big Power in a Small Package - The RIGID Industries SR-Q LED Light is one of the most versatile lighting products on the market today. This compact LED light can be used for virtually any lighting application - from off-road to agriculture. The SR-Q utilizes the same technology as our D-Series, but in a wide configuration, instead of square. The size and shape of the SR-Q LED Light allows it to fit almost anywhere. Its cast aluminum housing and polycarbonate lens are sealed against the elements for years of trouble-free operation. Hybrid Optics - Our patented Hybrid optics system is the most powerful, most efficient LED optics system on the market. Utilizing a combination of lens and reflector, the Hybrid optics system captures the maximum amount of light emitted from the LED and projects it exactly where you want it. Diffusion Lens - Perfect for scene or area lighting, our diffusion lens was specifically engineered to project light at a 60º flood pattern. Combine that with our patented optics and you have the best LED flood light in the industry. Like our standard lens, the diffusion lens is made from optically clear, unbreakable polycarbonate plastic. Quality Construction - Our circuitry is designed in-house to be more powerful, be more efficient, and generate less heat. Our durable aluminum housings feature custom, over-sized heat sinks which keep the temperature down and allow our LED's to run cooler and brighter. All RIGID Industries LED lights receive a high quality powder coat finish, a custom-molded rubber seal, and an unbreakable, scratch resistant lens. RIGID Industries LED lights are engineered to withstand whatever you, the road, or nature can throw at them. Features:  Hybrid Optics 60° Diffused Pattern Extended Wire Harness 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Cast Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered & Assembled in the USA Specifications:  Watts: 31 Amp Draw: 2.21 LED's: 4 Raw Lumens: 3168 Lux @ 10m: 13.38 Beam Distance: 36.6 m Peak Beam Intensity: 1338 cd

SR-Q PRO Back Light Kit - Flush Mount Diffused - Pair - Black RIGID's lighting kit includes everything you need to install a pair of RIGID Industries back-up lights on your vehicle: Two LED lights, and extended 25' wiring harness hardware and black covers. This kit features our patented Hybrid optics system combined with a Diffused lens, to offer a powerful 60deg beam pattern for unmatched visibility. Big Power in a Small Package - The RIGID Industries SR-Q LED Light is one of the most versatile lighting products on the market today. This compact LED light can be used for virtually any lighting application - from off-road to agriculture. The SR-Q utilizes the same technology as our D-Series, but in a wide configuration, instead of square. The size and shape of the SR-Q LED Light allows it to fit almost anywhere. Its cast aluminum housing and polycarbonate lens are sealed against the elements for years of trouble-free operation. Flush Mount - This particular model is specifically designed to be recessed into a truck bumper, a utility bed, the hull of a boat, or any application where you need the light to look clean and be out of the way. Once installed, the light is only 1/4" tall, which means you can have all the benefits of our surface mount lights in an OEM quality, flush installation. Hybrid Optics - Our patented Hybrid optics system is the most powerful, most efficient LED optics system on the market. Utilizing a combination of lens and reflector, the Hybrid optics system captures the maximum amount of light emitted from the LED and projects it exactly where you want it. Diffusion Lens - Perfect for scene or area lighting, our diffusion lens was specifically engineered to project light at a 60º flood pattern. Combine that with our patented optics and you have the best LED flood light in the industry. Like our standard lens, the diffusion lens is made from optically clear, unbreakable polycarbonate plastic. Quality Construction - Our circuitry is designed in-house to be more powerful, be more efficient, and generate less heat. Our durable aluminum housings feature custom, over-sized heat sinks which keep the temperature down and allow our LED's to run cooler and brighter. All RIGID Industries LED lights receive a high quality powder coat finish, a custom-molded rubber seal, and an unbreakable, scratch resistant lens. RIGID Industries LED lights are engineered to withstand whatever you, the road, or nature can throw at them. Features:  Hybrid Optics 60° Diffused Pattern Extended Wire Harness 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Cast Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered & Assembled in the USA Specifications:  Watts: 31 Amp Draw: 2.21 LED's: 4 Raw Lumens: 3168 Lux @ 10m: 13.38 Beam Distance: 36.6 m Peak Beam Intensity: 1338 cd

SAE Compliant E-Series 6" Light Bar - Pair - Black SAE Compliant Lights - RIGID Industries' SAE Compliant lights include the Dually Fog light Set and the 6” E-Series Auxiliary High Beam Driving Light Set. These SAE Compliant lights allow RIGID Industries LED Lights to be used on-the-road and not just off-road. SAE Defined - SAE stands for Society of Automotive Engineers. SAE is comprised of a number of working groups of automotive and lighting engineers that work with industry studies and other experts to set standards. SAE sets the standards for pretty much everything on a vehicle, from how bright or dim a brake light can be, to lens coatings (in some cases) to thermal performance, to colour specification (is that red brake light really red, or more pink-ish?). While SAE is not law in most areas, it is a best-practices standard that the entire automotive world pays attention to. Comparing SAE numbers usually gives a good level-playing-field comparison between lights. SAE publishes thousands of standards, each one numbered. Within each standard, there are usually “Classes” that specify performance. When a vendor says “SAE Compliant” on their website or literature, they should also specify the Standard number and the Class. Without it the term “SAE compliant” is meaningless. RIGID Industries SAE Compliant Dually Fog Light Set follows the SAE J583 Class and the RIGID Industries SAE Compliant Auxiliary High Beam Driving Light Set follows the SAE J581Class. Features:  Auxiliary Drive Light is Compliant with SAE J581 Specifications:  Watts: 41 Amp Draw: 2.85 LED's: 12 Raw Lumens: 5280 Lux @ 10m: 492 Beam Distance: 222 m Peak Beam Intensity: 49230 cd

Wire Harness f/D2 Pair This 14' wiring harness is designed to connect a pair of D2 LED lights to your 12V electrical system. It features battery terminals on one end and Deutsch connectors on the other to connect to the lights. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: D2 (Pair). Features: 18 AWG Wire Deutsch Connector Inline Fuse Holder

Ignite Flush Mount Spot - Single - Black The RIGID Ignite™ is the smallest, most versatile light in RIGID Industries’ product line! Measuring approximately 1.4” x 1.4” x 2”, this flexible light packs 1000 raw lumens using Spot, Flood or Diffused beam patterns; perfect for any application where short range light output is needed. The compact and lightweight housing makes the Ignite a great choice for auxiliary lighting on cars and trucks, motorcycles, UTVs, and even marine applications. Low current draw (less than 1 amp) and voltage requirements (6-28 volts) makes the Ignite adaptable to any application. Single light kits include one Ignite, and related hardware.  Features:  RIGID’s Smallest Forward Projecting Light Small Package, Big Output Low Minimum Voltage: 6-28 VDC IP68 Compliant Available in Spot, Flood and Diffused Beam Options RIGID Quality & Performance Smallest Flush Mount Light that RIGID Offers Easy Install Specifications:  LED's: 1 Raw Lumens: 1000 Lux @ 10m: 139 Beam Distance: 236 m Peak Beam Intensity: 13939 cd

Ignite Flush Mount Flood - Single - Black The RIGID Ignite™ is the smallest, most versatile light in RIGID Industries’ product line! Measuring approximately 1.4” x 1.4” x 2”, this flexible light packs 1000 raw lumens using Spot, Flood or Diffused beam patterns; perfect for any application where short range light output is needed. The compact and lightweight housing makes the Ignite a great choice for auxiliary lighting on cars and trucks, motorcycles, UTVs, and even marine applications. Low current draw (less than 1 amp) and voltage requirements (6-28 volts) makes the Ignite adaptable to any application. Single light kits include one Ignite, and related hardware.  Features:  RIGID’s Smallest Forward Projecting Light Small Package, Big Output Low Minimum Voltage: 6-28 VDC IP68 Compliant Available in Spot, Flood and Diffused Beam Options RIGID Quality & Performance Smallest Flush Mount Light that RIGID Offers Easy Install Specifications:  Watts: 12 Amp Draw: 0.85 LED's: 1 Raw Lumens: 1000 Lux @ 10m: 18 Beam Distance: 80M Peak Beam Intensity: 1786 cd

Ignite Flush Mount Diffused - Single - Black The RIGID Ignite™ is the smallest, most versatile light in RIGID Industries’ product line! Measuring approximately 1.4” x 1.4” x 2”, this flexible light packs 1000 raw lumens using Spot, Flood or Diffused beam patterns; perfect for any application where short range light output is needed. The compact and lightweight housing makes the Ignite a great choice for auxiliary lighting on cars and trucks, motorcycles, UTVs, and even marine applications. Low current draw (less than 1 amp) and voltage requirements (6-28 volts) makes the Ignite adaptable to any application. Single light kits include one Ignite, and related hardware.  Features:  RIGID’s Smallest Forward Projecting Light Small Package, Big Output Low Minimum Voltage: 6-28 VDC IP68 Compliant Available in Spot, Flood and Diffused Beam Options RIGID Quality & Performance Smallest Flush Mount Light that RIGID Offers Easy Install Specifications:  Watts: 12 LED's: 1 Raw Lumens: 1000 Lux @ 10m: 9 Beam Distance: 59.5M Peak Beam Intensity: 884.5 cd

Ignite Motorcycle Kit Spot - High/Low - Black RIGID’s Ignite™ is compact yet powerful, packing 1000 raw lumens in a housing that measures just 1.4” x 1.4” x 2” and weighs less than 4 ounces. Each Ignite Light also consumes just 1 amp at full power. Available with Spot or Flood beam patterns, the Motorcycle Kits have both High and Low settings that enable the lights to easily work with changing conditions and needs. The RIGID Motorcycle Kit includes a pair of Ignite Series Lights along with hardware, a wiring harness, and a sealed control switch suitable for permanently mounting the lights just about anywhere on the bike. With the Ignite Motorcycle Kit, it’s easier than ever to add light, compact, and powerful auxiliary lighting to touring bikes, cruisers, dirt bikes, and just about any other application. Features:  Motorcycle Kit Lights have High/Low Option RIGID’s Smallest Forward Projecting Light Small Package, Big Output Unlimited Mounting Options; Go-Pro™® Style Mounting Bracket that Mates to Endless Go-Pro Mounts Low Minimum Voltage: 6-28 VDC IP68 Compliant Available in Spot and Flood RIGID Quality & Performance Easy Install Specifications:  Watts: 12 LED's: 1 Spot - High: Raw Lumens: 1000 Effective Lumens: 770 Beam Width : 11 deg Peak Intensity: 13939 cd LUX @ 10m: 139Lux Beam Distance: 236M Spot - Low Raw Lumens: 200 Effective Lumens: 115 Beam Width: 11 deg Peak Intensity: 1895 LUX @ 10m: 19Lux Beam Distance: 87M