Adjustable In-Hull Transducer 600 Watt adjustable angled in hull transducer. (P79) Compatible with the following Echo Sounders: SL Series: SL755RC, SL760RC , SL1250, and SL1250RC hsb2 Plus Series: L755RC, L760, L760RC, L1250,and L1250RC hsb2 HDFI Series: DSM250, L770D, L770DRC, L1260D, and L1260DRC Compatible hull material: fiberglass Max Power: 600 W Frequency: 200/50 kHz Beam Angles: 200 kHz 11 50 kHz 45 Features: Depth only. Can be used in conjunction with the E66019 ST69 speed and temperature sensor Easily adjusts to any deadrise angle up to 22 Transmits sound waves directly at the bottom so strong echoes are reflected back to the transducer Can be removed in seconds for servicing or storage Only the base piece is bonded to the hull. There is no adhesive layer under the transducer face to absorb sound energy Simplifies in-hull installation 30ft (10m) Cable

P79 Adjustable In Hull Transducer 50/200kHz with 6-Pin Features: In Hull Transducer Plastic Adjustable 6-Pin WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Adjustable In-Hull Transducer  This in-hull transducer has a patented adjustable feature which ensures that sound waves are transmitted vertically to the bottom on almost any hull with a deadrise up to 22°.   With no hull penetration, installation is easy and high speed performance is maximized. Specifications: 30" (10 Meter) Cable included Adjusts to Hull Deadrise Angles from 2° to 22° 2-pin Packard connector (CN0068) Depth only Boat Size: Up to 8 m (25’) Epoxies to aluminum hulls under 3.8 mm (0.125”) thick  Factory P/N SN2010 and AirMar® P/N 31-247-1-01 (Model P79) **Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

P79 In-hull Our P79 in-hull transducer easily adjusts to hull deadrise angles up to 22°. This ensures that the beam is vertically oriented to receive echos resulting in accurate depth readings. Unlike traditional "puck" type transducers, our P79 consists of a base that is bonded to the hull and filled with liquid. The separate transducer then attaches to the base with a twist lock. The sound waves travel more efficiently though the liquid, giving the best possible performance. Features: Depth 200 kHz 600w RMS Mid-performance Plastic

Airmar P79 Adjustable 200/50kHz Plastic In-hull Transducer (8-pin) 010-10327-20 This entry level in-hull transducer with an adjustable deadrise angle makes installation a snap. The 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 22 degree deadrise. Transducer kit comes with installation instructions*. Follow the instructions carefully to avoid damaging your boat. *Fiberglass should be no more than 5/8" thick. Not recommended for cored hulls. When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

P79 Plastic In-Hull Transducer, 600w (10-Pin) 600 Watts 50/200 kHz 45/15 degree Beam Angles Plastic In-Hull Mount for Shoot-Through Applications 30 Foot Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Raymarine DST800 Nylon Thru Hull Transducer with Depth, Speed, and Temp for ST60, ITC-5, I50 comes with spade connectors.

P79 In-Hull Transducer w/Humminbird #9 Plug - 7-Pin Our P79 in-hull transducer easily adjusts to hull dead rise angles up to 22º. This ensures that the beam is vertically oriented to receive echoes, resulting in accurate depth readings. Unlike traditional "puck" type transducers, our P79 consists of a base that is bonded to the hull and filled with liquid. The separate transducer then attaches to the base with a twist lock. The sound waves travel more efficiently though the liquid, giving the best possible performance. Features: Adjusts to hull deadrise angles from 2° to 22° No holes to drill Depth only Recommended for solid fiberglass hulls Adheres to aluminum hulls under 3.8 mm (0.16") thick Recommended for planing-hull power boats, trailered boats, rigid inflatable boats (RIBS), and racing sailboats No hull protrusions Boat Size: Up to 8M (25') Specifications: Weight: 2.3kg (5lb) Hull Deadrise: 0° to 22°   Acoustic Window: Layered plastic urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Our P79 in-hull transducer easily adjusts to hull deadrise angles up to 22'. This ensures that the beam is vertically oriented to receive echos resulting in accurate depth readings. Unlike traditional "puck" type transducers, our P79 consists of a base that is bonded to the hull and filled with liquid. The separate transducer then attaches to the base with a twist lock. The sound waves travel more efficiently though the liquid, giving the best possible performance. Works with the Lowrance HDS Series and Simrad NSE Series Multifuction Display units. Features Depth 50/200 kHz 600 W RMS Mid-performance Plastic 7 Pin Blue Connector

xSonic P79 Adjustable 200/50kHz Plastic In-Hull Transducer - 9-Pin This entry level in-hull transducer with an adjustable deadrise angle makes installation a snap. The 9-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 22 degree deadrise. Transducer kit comes with installation instructions*. Follow the instructions carefully to avoid damaging your boat. *Fiberglass should be no more than 5/8" thick *Not recommended for cored hulls

CPT-S In-Hull CHIRP Transducer The CPT-S In-hull transducer provides a simple-to-install depth only transducer solution for non-cored fiberglass hulls. Ideal for sailing, cruising, and small powerboat applications, the CPTS-S In-hull transducer supports CHIRP sonar operation centered on 200kHz.  The CPT-S in-hull directly connects to Element S series units. Will connect to Axiom RV/Axiom Pro RVX and Element HV using the A80490 (Axiom) or A80559 (Element HV) adapters. An innovative transducer tube housing design allows the CPT-S In-Hull to mount in hulls ranging from 0 to 25 degrees deadrise.

xSonic M135M Medium Chirp 1 kW In-Hull Transducer - 9-Pin The M135M’s medium frequency delivers the right combination of coverage under the boat, an extended depth range, and the ability to produce clean and accurate target and structure returns in mid- to deeper water. Medium frequency also delivers excellent shallow to mid-depth performance, bottom detail, and fish-target separation. Operating at a frequency range of 85 to 135 kHz, this transducer reveals fish at medium depths up to 457 m (1500 ft) and gives ultra-clear target resolution. Airmar’s M135M includes a plastic mounting base that is aligned with the centerline and secured inside the hull. Then it is filled with non-toxic antifreeze. The transducer is inserted into the base and adjusted for the proper deadrise offset, ensuring the beam is shooting straight down for maximum echo returns. The eco-friendly coolant is the best medium to transmit through solid fiberglass and into the surrounding water. The major benefit of an in-hull transducer is that there are no protruding features on the exterior of the hull, making it the perfect choice for trailered or lifted boats. Designed for smaller boats up to 11 m (36') with a solid fiberglass hull. Features: Depth only 1 kW of power 50 kHz of total bandwidth from one transducer Recommended for use on planing and displacement hulls Plastic transducer and mounting base Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth Also available as transom (TM185M), thru-hull low-profile (B175M), and thru-hull with fairing (B285M) mounts Patented Xducer ID® technology Specifications: Medium frequency: 85 to 135 kHz Beamwidth: 16 degrees to 11 degrees Maximum Depth: 457 m (1500 ft.) Weight: 4.2 kg (9.2 lb.) Recommended Boat Length: Up to 11 m (36 ft.) Hull Material: Solid fiberglass only Hull Deadrise: Up to 22 degrees Acoustic Window: Urethane Transducer Element: One broadband ceramic assembly Includes: Adjustable mounting base This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Kayak In-Hull Transducer Mount Garmin's versatile in-hull transducer mounting solution for kayaks allows fishermen to get out on the water with their favorite Garmin equipment. The mount fits the Garmin dual beam transducer (77/200 kHz) and GT20-TM transducer (77/200 kHz/DownVü), and is for use with compatible fishfinder and combo marine devices. It can withstand continous water submersion without releasing, all while protecting your transducer (sold separately) within the kayak. The mount - a foam pad with adhesive - comes with installation instructions. No tools are required for installation; however, follow the instructions carefully to avoid damaging your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

R111-LH Chirp In-Hull Transducer - Bare Wire Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 117 kHz of total bandwidth in just one installation, saving customers time and money. A Hard-Core In-Hull model in the Chirp Thru-Hull product line L/H Chirps across the following bandwidths: L/H Model -Low Frequency 38-75 kHz, High Frequency 130-210 kHz Features Depth & fast-response water-temperature sensor Low—CHIRPS from 38 kHz to 75 kHz 19° to 10° beamwidth High—CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth 117 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 38, 50, and 200 kHz plus everything else in the bandwidth Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking) Urethane transducer housing Hull Type: Solid fiberglass only Exclusive Xducer ID® technology Hull Deadrise: 0° to 22° Acoustic Window: Epoxy/urethane All mounting hardware provided, including tank Weight: 19.7 kg (43.4 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

M265LH 1kW Urethane In-Hull Transducer with In-Hull Mounting Kit The M265 is an outstanding in-hull option with 8 internal ceramics and up to 117kHz of total CHIRP range. The in-hull installation eliminates the need to drill any holes in the hull, while accommodating a large range of deadrise angles. The medium-frequency benefits include the ability to identify targets deeper than the high-frequency with benefit of a wider beam angle. The high frequency provides excellent shallow water resolution.