Retractable Lexan Speed/Temp Sensor ST800/P120 standard plastic low profile thru-hull speed and temperature retractable transducer with 45' cable Compatible with the following instruments: ST70* ST60+ ST290 Compatible hull material: Aluminum and fiberglass Hole diameter for installation: 2" *Using with ST70 requires purchase of ST70 Speed Pod, sold seperately

DST-810MSF Bronze Thru-Hull, Digital Depth, Speed, Temp Sensor, NMEA2000  Airmar B617V Housing Style Transducer The DST-801MSF offers depth, speed, and temperature in a single, 51 mm (2”) fitting. Only one hole through the hull simplifies the installation — an attractive feature for boat builders and boat owners alike. Patented, speed-signal-processing and upgraded 5 Hz (5X per second) speed-through-water enhancements provide excellent paddlewheel accuracy below 5 knots (6 MPH) and smooth linear output at all vessel speeds. The transducer’s wide, fan-shaped, fore-aft beam is able to find bottom even when installed on steep deadrise hulls or heeling sailboats. You also get true water-temperature readings with the DST-810MSF's reliable temperature sensor. The DST-810MSF features a new Wireless connectivity to Airmar's CAST App, allowing you to calibrate the sensor, add depth offsets, and more. Features: Depth, speed, and temperature in one compact bronze housing Fast-response temperature sensor provides ±0.2°C (±0.1°F) accuracy Weight: 1.6 kg (3.5 lb) Acoustic Window: Urethane Hull Deadrise: Up to 22° Data Update Rate: 1 per second Minimum Sounding Depth: 0.5 m (1.6’) Maximum Sounding Depth: 70 m (230’) Pressure Rating: 3 m (10’) Pulse Rate: 20,000 p/nm* (5.6 Hz per knot)—*p/nm = pulses per nautical mile Smart Sensor Supply Voltage at 100% Sound Power Output: 11.5 VDC to 25 VDC Supply Current: 40 mA Standard Cable Length: 6m NMEA 2000® Load Equivalency Number (LEN): 4 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Plastic Transom Mount, Digital Depth, Speed & Temp Sensor (7-Pin) 200 Watts 235 kHz Plastic Transom Mount Depth, Speed and Temperature (+/ - 1 degree ) 10-Meter Cable with 7-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

235DST-MSE Bronze Thru-Hull, Digital Depth, Speed & Temp Sensor - 7-Pin Features: 200 Watts 235 kHz Bronze Thru-Hull Depth, Speed and Temperature (+/- 1°) 10-Meter Cable with 7-Pin Connector Can be flush mounted on a hull with up to a 22° dead rise WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Mareton DST110 Smart™ Retractable Depth/Speed/Temperature Transducer The DST110 delivers precise digital depth, accurate speed and exact water temperature even at speeds above 40 knots - all with no programming or calibration necessary. Its patented Smart™ Sensor Technology, retractable and removable sensor, and NMEA 2000® network connectivity make the DST110 easy to interpre, easy to install and connect with other navigation equipment, and easy to maintain. The DST110 measures precise water depth at 0.4m to 100m with a wide beam width and is tolerant to most deadrise angles. It reads water temperature from -10°C to +40°C at ±1.0xC accuracy, and accurate speed from 1 to 50 knots. User customizable calibrations for speed and temperature indications for your installation. At 235kHz it can be used with a fishfinder as an ideal navigation tool for sport or commercial fishing vessels or with sailing vessels of all sizes. The DST110's plastic, bronze, or stainless steel housing choices are compatible with any hull material. It includes a blank plug to replace its sensor unit when the vessel will be docked for extended periods or trailered. This prevents damage to the sensor and reduces fouling growth. Maretron's DST110 is CE compliant (IEC 60945) and is manufactured to the highest quality standards under ISO9K/2K procedures. Its compact, waterproof housing will provide years of reliable performance, making it the Smart™ choice in marine sensing. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Plastic Transom Clip-On Speed and Temp Sensor (6-Pin_ Clip-On Plastic Transom-Mount Speed and Temperature Sensor 6-Pin Connector 9-Meter Cable Comes with Bracket Part # AIR-020-058 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Speed & Temp Thru-Hull NMEA2000 - Plastic Low-profile through-hull speed/temp sensor for NMEA 2000 networks The ST850 is sold with plastic housing only. Bronze and stainless steel housings are available for separate purchase. Specifications: Type: NMEA 2000 network transducer Mounting: Low-profile through-hull Housing: Urethane Hull Aperture: 2" (51mm) Usable Shaft Length: 2.25" (57mm) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

ST800PV-N2 NMEA 2000 Speed & Temp Transducer The ST800 speed and temperature sensor process digital signals inside the thru-hull housing. Then this Smart™ Sensor sends data to a chart plotter, radar screen, or digital display in either analog or NMEA 2000® format. These low-profile units are nearly flush, minimizing drag with only 5 mm (3/16") extending outside of the hull.  Features: Speed and fast-response water-temperature sensing Speed range from 2 to 45 knots (2 to 52 MPH) NMEA 2000 or NMEA 0183 analog output Retractable insert in a low-profile housing with a water valve Available in a plastic (P120) or bronze (B120) housing Airmar's Smart™ Sensor technology Specifications: Plastic: 0.7 kg (1.4 lb.) Bronze: 1.3 kg (2.8 lb.) Hull Material: Plastic: Fiberglass or metal/Bronze: Fiberglass or wood Hole Diameter: 51 mm or 2" Speed Range: 2 to 45 knots (2 to 52 MPH) Water Temperature: Range: -10 to 40°C (14 to 104°F)/ Accuracy: ±0.5°C (±1.8°F) Pressure Rating: 3 m (10') Data: Output Protocol: NMEA 0183 or NMEA 2000/Update Rate: 1 time/s Power: Supply Voltage: 9 to 16 VDC/Supply Current: <200 mA/NMEA 2000 Load Equivalency Number (LEN): 2 Standard Cable Length: NMEA 2000: 6 m (20')/NMEA 0183: 9 m (30') Includes: Blanking plug Certifications and Standards: CE, IEC60945 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bronze Thru-Hull Speed and Temp Sensor (6-Pin) Bronze Thru-Hull Speed and Temperature Sensor 6-Pin Connector 9-Meter Cable WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bronze Thru-Hull, Digital Depth and High-Precision Temp Sensor, with 7 Inch Stem and High Speed Fairing Block (7-Pin) Features: 200 Watts 235 kHz Bronze Thru-Hull with 7" Stem Depth and High-Precision Temperature ( + / - .02 degree ) 10-Meter Cable with 7-Pin Connector Fairing Block and Installation Materials Included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

ST850 Speed/Temp Plastic Transducer ST850 passive (analog) sensor, designed to connect to 22098560 - D800 Depth plastic thu-hull transducer. Features: ST850-P617V Speed and Temperature Sensor  5-Pin Connector 

Furuno FI70DSW Depth/Speed/Wind FI70 Package Our professionally designed FI70 instrument series is designed to meet the needs of sail boaters and power boaters alike. The FI70DSW package offers a solution to boaters looking for an economical solution to display Water Depth and vessel speed, as well as wind speed and direction. The FI70DSW package consists of the FI5001 Wind Sensor, DST-800PSF Digital Depth/Speed/Temp sensor, and two FI70 Digital Data Displays. The package includes the IF-NMEAFI Analog to NMEA2000 data converter as well as the FI5002 Junction Box for a simple installation and full compatibility with other navigation equipment. Whether you use these instruments by themselves or as a part of your NavNet system, the FI70DSW will add both function and beauty to your helm. The FI5001 is an analog Wind Transducer capable of detecting wind angle accuracy of better than q10x and wind speed accuracy of better than +/-5% (20 kt). The DST-800PSF operates at 235kHz and provides Depth and Speed Through Water, as well as Temperature accuracy within a single degree. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Coolant Temperature Sensor - 40°C to 120°C - M16 x 1.5 Thread Features: Measurement Range - +40°C - 120°C Category - Temperature Sensors Signal Analogue - 287.4 - 22.7 Ohm Operating Voltage - 6 - 24 V Temperature medium - Coolant - Water - Air - Engine oil - Transmission oil - Fuel Communication - Analog Signal Output - 287.4 - 22.7 Ohm Sensor Signal - Common Ground Sensor Connector - M4 Plastic Knurled Nut Thread - M16 X 1.5 Male Warning Contact - None Connector Type - M4 Kunststof Kartelmoer *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Temp Sensor Battery - 20' Temperature Sensor, Battery - 20' Length This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

T-04MSB Bronze Thru-Hull Temp Sensor - 6-Pin Bronze Thru-Hull Temp Sensor, 8 Meter Cable with 6-Pin Connector.  Specifications: Housing Type: Bronze Install Type: Thru-Hull Features:  Bronze Thru-Hull Temperature Sensor 6-Pin Connector 8-Meter Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.