Black Q24D Quantum 2 Doppler Radar with 10M Power & Data Cables Keep inexperienced boaters and hidden dangers at bay, even in the most congested waterways. Quantum™ 2 with Doppler collision avoidance technology makes it easy to discern potentially dangerous targets when navigating in high-traffic areas. Using advanced Doppler processing, Quantum 2 instantly highlights moving radar contacts and color codes to indicate whether they are inbound or outbound.   Features: Black radome enclosure  WiFi and Ethernet  10M power and data cables are included Quantum 2 Doppler Radar, perfect for sailboats, RIBs, and smaller powerboats Available as a standalone scanner with power and data cable  Provides excellent short-range detection and enhanced target detail with an 18’ (6m) minimum range Simplified, fast installation, and the ability to utilize existing Raymarine scanner fixing points Once installed, Quantum 2 starts right up and immediately provides awareness Quantum 2 Black: Stay Aware With Style Offering confident radar navigation and style, Quantum 2 Black adds a level of sophistication to any vessel.  Quantum 2 Black offers the same performance and safety-enhancing Doppler target tracking as the original white Quantum 2 in premium black housing.     Superior Collision Avoidance Raymarine Quantum 2 Doppler target processing identifies and color codes moving radar contacts for instant recognition and reduced risk of collision.  Quantum 2 MARPA mode provides an effective means of dangerous target tracking and is the same technology trusted by the United States Coast Guard. What’s In The Box: 18 in. black radome Power cable 10M (32.8 ft.) Data cable 10M (32.8 ft.) Fixing bolts with spring washers and flat washers (M8) x 4 Documentation General Specifications: Dimensions (Diameter|Height): 541.0 mm|209.5 mm Weight: 5.6 kg Supply Voltage: Either 12 V dc or 24 V dc nominal Minimum: 10.8 V dc | Maximum: 31.2 V dc Operating Voltage Range: Minimum: 10.8 V dc | Maximum: 31.2 V dc Power Consumption: Transmit mode (maximum): 17 W | Standby mode: 7 W | Sleep mode (applies only to radars connected via Wi-Fi): 2 W Waterproofing: IPX6 Operating Temperature Range: -10°C to +55°C Storage Temperature Range: -25°C to +70°C Additional Storage Conditions: Store upright; do not block vents on the underside Humidity: Up to 95% at 35°C Maximum wind speed: 100 kts Transmitter Specifications: Type: X-band solid-state transmitter with pulse compression technology Transmit Frequency: 9354 MHz to 9446 MHz Peak Power Output: 20W Duplexer: Circulator Pulse Widths (3 dB): 40 ns to 14.7 us Chirp Lengths: 400 ns to 22 us Pulse Repetition Frequency: 920 Hz to 5900 Hz Chirp Bandwidth: Up to 32 MHz Standby Mode: Scanner rotation - OFF | Scanner transmission - OFF | Wi-Fi link – ON Antenna Specifications: Type: Patch Array Beamwidth (nominal): Horizontal: 4.9° | Vertical: 20° Polarization: Horizontal Rotation Speed: 24 rpm nominal Receiver Specifications: IF Frequency: 26 MHz Noise Figure: Less than 4 dB Doppler Specifications: Target Tracking: Tracking of 25 simultaneous MARPA and/or ARPA targets Target Filtering: True Motion Mode identifies only those objects that are moving relative to the vessel Compatibility Specifications: Radar Type: Quantum 2 with Doppler MFD Compatibility: Axiom and Axiom Pro Perfect for: Sailboats, RIBs, and smaller powerboats Type: Solid State CHIRP Pulse Compression with Doppler target tracking Range Performance: 24NM Performance: Lightweight and easy to install. Excellent short and long-range performance. Detect targets as close as 18ft Automatic Bird Mode: No MARPA Target Tracking: Yes Radar Specifications: Transmitter Type: X-band solid-state transmitter with pulse compression technology Target Tracking: Track up to 25 simultaneous Radar targets Standby Mode: Rotation: OFF, Transmission: OFF, Wi-Fi: ON Antenna Type: Patch Array Noise: Less than 4 dB Beamwidth (nominal): Horizontal: 4.9°, Vertical: 20° Polarization: Horizontal Duplexer: Circulator Transmit Frequency: 9354 MHz to 9446 MHz Pulse Repetition Frequency: 920 Hz to 5900 Hz CHIRP Lengths: 400 ns to 22 µs Pulse widths (3 dB)     40 ns to 14.7µs IF Frequency: 26 MHz Rotation Speed: 24 RPM Peak Power Output: 20 W Conformance: Standards: USA: 47CFR FCC Part 2 & Part 80 Certificate of Approval, Canada: RSS138 Iss. 1 Technical Acceptance Certificate, European Union & EFTA: Radio Equipment Directive 2014/53/EU Certificate of Opinion, Australia / New Zealand: ACMA Declaration of Conformity Compliance level 3 Environmental Specifications: Relative Humidity: Up to 95% @ 35°C (95°F) Additional Storage Conditions: Store upright; do not block vents on the underside Waterproof Rating: IPx6 Storage Temperature: -25°C to +70°C (-13°F to 158°F) Maximum Wind Speed: 100 knots Operating Temperature: -10°C to +55°C (14°F to 131°F) Physical Specifications: Dimensions: Height: 209.5 mm (8.25 in), Diameter: 541.0 mm (21.3 in) Weight: 5.6 kg (12.35 lbs)

Black Q24D Quantum 2 Doppler Radar with 15M Power & Data Cables Keep inexperienced boaters and hidden dangers at bay, even in the most congested waterways. Quantum™ 2 with Doppler collision avoidance technology makes it easy to discern potentially dangerous targets when navigating in high-traffic areas. Using advanced Doppler processing, Quantum 2 instantly highlights moving radar contacts and color codes to indicate whether they are inbound or outbound.   Features: Black radome enclosure  WiFi and Ethernet  15M power and data cables are included Quantum 2 Doppler Radar, perfect for sailboats, RIBs, and smaller powerboats Available as a standalone scanner with power and data cable  Provides excellent short-range detection and enhanced target detail with an 18’ (6m) minimum range Simplified, fast installation, and the ability to utilize existing Raymarine scanner fixing points Once installed, Quantum 2 starts right up and immediately provides awareness Quantum 2 Black: Stay Aware With Style Offering confident radar navigation and style, Quantum 2 Black adds a level of sophistication to any vessel.  Quantum 2 Black offers the same performance and safety-enhancing Doppler target tracking as the original white Quantum 2 in premium black housing.     Superior Collision Avoidance Raymarine Quantum 2 Doppler target processing identifies and color codes moving radar contacts for instant recognition and reduced risk of collision.  Quantum 2 MARPA mode provides an effective means of dangerous target tracking and is the same technology trusted by the United States Coast Guard. What’s In The Box: 18 in. black radome Power cable 15M (49.2 ft) Data cable 15M (49.2 ft) Fixing bolts with spring washers and flat washers (M8) x 4 Documentation General Specifications: Dimensions (Diameter|Height): 541.0 mm|209.5 mm Weight: 5.6 kg Supply Voltage: Either 12 V dc or 24 V dc nominal Minimum: 10.8 V dc | Maximum: 31.2 V dc Operating Voltage Range: Minimum: 10.8 V dc | Maximum: 31.2 V dc Power Consumption: Transmit mode (maximum): 17 W | Standby mode: 7 W | Sleep mode (applies only to radars connected via Wi-Fi): 2 W Waterproofing: IPX6 Operating Temperature Range: -10°C to +55°C Storage Temperature Range: -25°C to +70°C Additional Storage Conditions: Store upright; do not block vents on the underside Humidity: Up to 95% at 35°C Maximum wind speed: 100 kts Transmitter Specifications: Type: X-band solid-state transmitter with pulse compression technology Transmit Frequency: 9354 MHz to 9446 MHz Peak Power Output: 20W Duplexer: Circulator Pulse Widths (3 dB): 40 ns to 14.7 us Chirp Lengths: 400 ns to 22 us Pulse Repetition Frequency: 920 Hz to 5900 Hz Chirp Bandwidth: Up to 32 MHz Standby Mode: Scanner rotation - OFF | Scanner transmission - OFF | Wi-Fi link – ON Antenna Specifications: Type: Patch Array Beamwidth (nominal): Horizontal: 4.9° | Vertical: 20° Polarization: Horizontal Rotation Speed: 24 rpm nominal Receiver Specifications: IF Frequency: 26 MHz Noise Figure: Less than 4 dB Doppler Specifications: Target Tracking: Tracking of 25 simultaneous MARPA and/or ARPA targets Target Filtering: True Motion Mode identifies only those objects that are moving relative to the vessel Compatibility Specifications: Radar Type: Quantum 2 with Doppler MFD Compatibility: Axiom and Axiom Pro Perfect for: Sailboats, RIBs, and smaller powerboats Type: Solid State CHIRP Pulse Compression with Doppler target tracking Range Performance: 24NM Performance: Lightweight and easy to install. Excellent short and long-range performance. Detect targets as close as 18ft Automatic Bird Mode: No MARPA Target Tracking: Yes Radar Specifications: Transmitter Type: X-band solid-state transmitter with pulse compression technology Target Tracking: Track up to 25 simultaneous Radar targets Standby Mode: Rotation: OFF, Transmission: OFF, Wi-Fi: ON Antenna Type: Patch Array Noise: Less than 4 dB Beamwidth (nominal): Horizontal: 4.9°, Vertical: 20° Polarization: Horizontal Duplexer: Circulator Transmit Frequency: 9354 MHz to 9446 MHz Pulse Repetition Frequency: 920 Hz to 5900 Hz CHIRP Lengths: 400 ns to 22 µs Pulse widths (3 dB)     40 ns to 14.7µs IF Frequency: 26 MHz Rotation Speed: 24 RPM Peak Power Output: 20 W Conformance: Standards: USA: 47CFR FCC Part 2 & Part 80 Certificate of Approval, Canada: RSS138 Iss. 1 Technical Acceptance Certificate, European Union & EFTA: Radio Equipment Directive 2014/53/EU Certificate of Opinion, Australia / New Zealand: ACMA Declaration of Conformity Compliance level 3 Environmental Specifications: Relative Humidity: Up to 95% @ 35°C (95°F) Additional Storage Conditions: Store upright; do not block vents on the underside Waterproof Rating: IPx6 Storage Temperature: -25°C to +70°C (-13°F to 158°F) Maximum Wind Speed: 100 knots Operating Temperature: -10°C to +55°C (14°F to 131°F) Physical Specifications: Dimensions: Height: 209.5 mm (8.25 in), Diameter: 541.0 mm (21.3 in) Weight: 5.6 kg (12.35 lbs)

Quantum 2 Q24D Radar Doppler with 10M Power & Data Cables The Raymarine Quantum 2 Radar has Doppler collision avoidance technology. The Quantum 2 next generation CHIRP pulse compression radar by Raymarine provides superior target awareness at both long and extremely short ranges. Using advanced Doppler processing, the system instantly highlights moving radar contacts and color codes them to indicate whether they are inbound or outbound. Quantum with Doppler makes it easy to discern potentially dangerous targets when navigating in high-traffic areas. Easily Identify Dangerous Targets Raymarine Quantum 2 Doppler target processing readily identifies and color codes moving radar contacts for instant recognition and reduced risk of collision. Safer Navigation Quantum 2’s exclusive Safety Sector feature provides the maximum level of visibility to dangerous targets in the path of your vessel (both mobile and stationary). Superior Collision Avoidance Doppler-enabled MARPA provides an effortless means of dangerous target tracking by eliminating the need to setup guard zones. Raymarine MARPA target tracking is the same technology trusted by the United States Coast Guard. Features: Doppler moving target display allows for superior situational awareness at-a-glance Fully automatic ARPA target tracking, along with manual MARPA mode Adjustable TrueTrails target history shows the motion history of moving contacts CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation 24-mile range for early detection of traffic, navigation aids, landfall and weather Immediate awareness – Quantum starts up and is ready to go in seconds Superior interference rejection eliminates noise from other radars Simplified installation with Wi-Fi or thin wire network connectivity Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars Safe emissions – mount Quantum anywhere onboard Low power consumption for extended battery life under sail How Doppler Radar Works: Microwave energy waves are bounced off of a distant target, just like conventional radar. Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted. For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target’s range decreases. For outbound targets, the frequency drops as the returning echoes spread out as its range increases. Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets. Doppler Target Processing Doppler radar is tuned specifically to detect the radar echo frequency shift returned by moving vs. stationary targets.Quantum 2 then uniquely color codes moving targets to indicate whether they are getting closer, or moving away. Inbound targets are colored red Outbound targets are colored green Color coded targets make it simple to pick out moving traffic from other stationary targets like land, navigation aids or stopped/anchored vessels. Quantum 2 Safety Sector Doppler does an excellent job of bringing attention to moving targets, but it does downplay stationary targets, that can be equally as dangerous.Safety Sector provides equal attention to these imminent threats by coloring them as inbound targets. Potential targets include: Buoys Exposed Hazard (rocks, pilings, etc...) Slow moving, low visibility vessels Quantum 2's Safety Sector spreads 15° from the bow to a distance of approximately 200m NOTE: The safety sector is not visible on the display. Quantum 2 automatically processes and highlights targets within this region in red. The Quantum 2 also features fully automatic target acquisition and tracking. Configure custom safety or alarm zones and be alerted to new radar contacts entering the zone. Quantum 2 can begin tracking those contacts automatically, calculating their course, speed, closest point of approach and more. You’ll be alerted to dangerous contacts with audible alerts and easy to understand on-screen graphics. Quantum 2 also features Raymarine’s True Trails target history display. The True Trails features enables you to see a historical “wake” behind every moving contact. This additional information makes it even easier to interpret the motion of other vessels, and make smart maneuvering decisions to pass safely. Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install. Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power. Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD. The Quantum 2 with Doppler truly sets the standard for on the water safety and collision avoidance.

Quantum 2 Q24D Radar Doppler with 15M Power & Data Cables The Raymarine Quantum 2 Radar has Doppler collision avoidance technology. The Quantum 2 next generation CHIRP pulse compression radar by Raymarine provides superior target awareness at both long and extremely short ranges. Using advanced Doppler processing, the system instantly highlights moving radar contacts and color codes them to indicate whether they are inbound or outbound. Quantum with Doppler makes it easy to discern potentially dangerous targets when navigating in high-traffic areas. Easily Identify Dangerous Targets Raymarine Quantum 2 Doppler target processing readily identifies and color codes moving radar contacts for instant recognition and reduced risk of collision. Safer Navigation Quantum 2’s exclusive Safety Sector feature provides the maximum level of visibility to dangerous targets in the path of your vessel (both mobile and stationary). Superior Collision Avoidance Doppler-enabled MARPA provides an effortless means of dangerous target tracking by eliminating the need to setup guard zones. Raymarine MARPA target tracking is the same technology trusted by the United States Coast Guard. Features: Doppler moving target display allows for superior situational awareness at-a-glance Fully automatic ARPA target tracking, along with manual MARPA mode Adjustable TrueTrails target history shows the motion history of moving contacts CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation 24-mile range for early detection of traffic, navigation aids, landfall and weather Immediate awareness – Quantum starts up and is ready to go in seconds Superior interference rejection eliminates noise from other radars Simplified installation with Wi-Fi or thin wire network connectivity Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars Safe emissions – mount Quantum anywhere onboard Low power consumption for extended battery life under sail How Doppler Radar Works: Microwave energy waves are bounced off of a distant target, just like conventional radar. Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted. For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target’s range decreases. For outbound targets, the frequency drops as the returning echoes spread out as its range increases. Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets. Doppler Target Processing Doppler radar is tuned specifically to detect the radar echo frequency shift returned by moving vs. stationary targets.Quantum 2 then uniquely color codes moving targets to indicate whether they are getting closer, or moving away. Inbound targets are colored red Outbound targets are colored green Color coded targets make it simple to pick out moving traffic from other stationary targets like land, navigation aids or stopped/anchored vessels. Quantum 2 Safety Sector Doppler does an excellent job of bringing attention to moving targets, but it does downplay stationary targets, that can be equally as dangerous.Safety Sector provides equal attention to these imminent threats by coloring them as inbound targets. Potential targets include: Buoys Exposed Hazard (rocks, pilings, etc...) Slow moving, low visibility vessels Quantum 2's Safety Sector spreads 15° from the bow to a distance of approximately 200m NOTE: The safety sector is not visible on the display. Quantum 2 automatically processes and highlights targets within this region in red. The Quantum 2 also features fully automatic target acquisition and tracking. Configure custom safety or alarm zones and be alerted to new radar contacts entering the zone. Quantum 2 can begin tracking those contacts automatically, calculating their course, speed, closest point of approach and more. You’ll be alerted to dangerous contacts with audible alerts and easy to understand on-screen graphics. Quantum 2 also features Raymarine’s True Trails target history display. The True Trails features enables you to see a historical “wake” behind every moving contact. This additional information makes it even easier to interpret the motion of other vessels, and make smart maneuvering decisions to pass safely. Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install. Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power. Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD. The Quantum 2 with Doppler truly sets the standard for on the water safety and collision avoidance.

Power/Data Cable - Bare Wires This power and data cable has bare wires at the end, so you can hard wire your GPS directly to a DC power source or other electronic device. This allows you to send speed and position data to devices such as a chartplotter, computer, auto pilot, or radar. Compatible Devices: Fishfinder 320C GPS Series GPSMAP® Series WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Power/Data Cable This is a dual purpose cable. It is utilized as a Power Cable Assembly for the FCV585 and FCV620 Fish Finders. In addition, this cable can be utilized as an NMEA0183 data cable for the GP33. *Note: When used with the GP33, the fused portion of the red and black wire MUST be removed. In this application, this cable provides data only and CAN NOT be used to power the GP33. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Power/Data Cable Connect or poer your fishfinders and sounders with this power/data cable. Compatible Devices: Fishfinder 300C Fishfinder 400C GPSMAP® 400 Series GPSMAP® 500 Series WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Power/Data Cable Garmin's power and data cable may be used for lengthy cable runs. Cable has a 7 pin/bare wire termination. Compatible Devices: GSD™ 22 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Power/Data Cable - 4-Pin Use this 6' power/data cable to power your compatible echoMAP. Includes NMEA 0183 inputs/outputs. Compatible Devices: echoMAP™ Series WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

7-Pin Power/Data Cable with 90° Connector Connect your GMI™ 20 or GHC™ 20 to a NMEA 0183 device with this 7-pin power/data cable. Features: 90° connector for installation in tight spaces or flush mounting Compatible Devices: GHC™ 20 Marine Autopilot Control Unit GMI™ 20 Marine Instrument GNX™ 20 Marine Instrument GNX™ 21 Marine Instrument WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Power/Data Cable for echoMAP™ CHIRP 7Xdv, 7Xsv & 9Xsv Use Garmin's Power/Data Cable to power an echoMAP™ CHIRP 7Xdv, 7Xsv or 9Xsv combo device. Includes NMEA 0183 inputs/outputs and 4-Pin. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Power/Data Cable f/AIS 600 Use this power/data cable to power the AIS 600. Includes NMEA 0183 inputs/outputs. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Power/Data Cable for V3 - 100' 100' in Length Power/Data Cable

OceanLink® Power & Data Cable - 85MM Master Gauges Features: Power & Data Cable for 85 MM Master Gauges Sold as a single This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Power & Data Cable f/ OceanLink Master TFT - Engine # 1 Replacement Power and Data Input Signal Harness used for Engine 1 connector on OceanLink 7” Display Features: Power & Data Cable for Master TFT Displays  Cable length - .5M (1.6') *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.