|
RNS-8 Network Switch - 8 Port Raynet Network Switch
The RNS-8 network switch is a premium network switch for integrated Raymarine chartplotter systems. Use the RNS-8 to integrate Axiom displays with radars, sonar modules, and FLIR thermal cameras. The RNS-8 features 4 dedicated Power-Over-Ethernet (POE) ports for integrating and powering POE-compatible devices like CAM300 marine IP cameras and RMK-10 remote keypads. The RNS-8 also supports networking with Raymarine YachtSense digital control systems and the YachtSense Link marine mobile router. Multiple RNS-8 switches can be daisy-chained together for larger systems. The RNS-8 is simple to install and requires no complicated setup.
Features:
8 RayNet Ethernet gigabit ports for fast and reliable connectivity
4 dedicated Power-Over-Ethernet (POE) ports for powering cameras and remotes
Rugged IPX6/IPX7 construction
Reliable, waterproof RayNet connector Ethernet cable ports
Designed for simple bulkhead mounting
LED power and network port status indicators
Unmanaged- simply plug and play with Raymarine devices.
Remote diagnostics and performance monitoring via web browser
For extended networks, up to 8 RNS-8 switches can be daisy-chained together
|
967.73 |
|
|
RNS-5 5 Port RayNet Gigabit Switch
The RNS-5 network Gigabit switch is designed for expanding Raymarine integrated chartplotter systems using RayNet high-speed Ethernet cabling. Use the RNS-5 to integrate Axiom displays with radars, sonar modules, IP cameras, and Teledyne FLIR thermal cameras. The RNS-5 also supports networking with Raymarine YachtSense digital control systems and the YachtSense Link marine mobile router. Two RNS-5 switches can be daisy-chained together for larger systems. The RNS-5 is simple to install and requires no complicated setup.
Features:
5 RayNet Ethernet gigabit ports for fast and reliable connectivity
Rugged IPX6 and IPX7 construction
Reliable, waterproof RayNet connector Ethernet cable ports
Designed for simple bulkhead mounting
LED power and network port status indicators
Unmanaged- simply plug and play with Raymarine devices
No complicated setup or configuration
|
387.08 |
|
|
HS5 SeaTalkhs Network Switch
The HS5 SeaTalkhs Network Switch works with Raymarine's latest c-Series and e-Series Multifunction Displays and accessories and serves as the central connection point for the SeaTalk High Speed Network.
The HS5 uses the new Raynet waterproof connection system found on c-Series and e-Series displays, and provides a secure, reliable weather tight connection. Up to 5 displays or other peripherals can be connected directly to the HS5 network switch. The 5 ports all support 10 or 100 Megabit speeds when connected to peripherals like displays, scanners, sounder modules or thermal cameras. The 5th port also supports Gigabit speed for interconnecting multiple HS5 switches together on very large networks.
The compact HS5 works on both 12V and 24V dc power systems, and is simple to install with large keyhole mounting slots and front-facing status indicators.
|
342.38 |
|
|
NS5 5 Port Marine Network Switch
More and more boats now have a wireless router fitted or utilize devices like our 4G Connect for internet connectivity. For optimum data transfer speed, a wired Ethernet connection still offers the fastest and most reliable network connection onboard a boat, and for Streaming TV, VOIP, Security Cameras, and other data-intensive services we always recommend using a wired connection.
Our NS5 Network Switch provides a simple and rugged solution to increasing the number of wired Ethernet connections on the vessel. Designed to operate from a 9v to 36v DC supply, with dual redundancy power supply design, a DIN rail mount, and five RJ45 10/100 Ethernet ports, the NS5 allows you to reliably expand your boat’s Ethernet network.
Installation could not be easier, simply connect one of the NS5’s RJ45 sockets to a LAN socket on our 4GConnect or 4GXtream routers, using a normal network cable and wire the NS5 directly to the boat’s 12v or 24v DC supply. Our 4G router will continue to provide IP addresses to any device plugged into the NS5 (via DHCP) and you can immediately see the status of all the Ethernet connections by the flashing Yellow and Green LEDs on each of the NS5’s ports.
Specifications:
5 Port Network Switch
12/24v DC low power operation
Dual redundancy power supply design
Connects to the router via RJ45 Cat 5/6 network cable connection
Supports 10/100 base-T
DIN Rail (IEC/EN 60715 – 35 × 7.5mm) mounting bracket and 100mm rail included
Status indicators for power and network link status
Version: NMEA0183, NMEA2000
|
142.75 |
|
|
24-Port Network Switch Desk or Rack - Mountable - 100-240VAC - 50/60Hz
Quickly and easily expand the wired connections on your vessel at Gigabit speeds with ease.
The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminate the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance.
Gigabit Ethernet
Transfer data 10x faster than Fast Ethernet, ensuring high-speed and lower latency connectivity for wired devices on the vessel.
Energy Efficient
Green Ethernet technology saves the power up to 84% over traditional wired networking device connections.
Easy Setup
Installation is fast and easy. No CD or software installation is required. Simply mount, plug in, and power on. Connections are hot-swappable.
Package Contents:
NS-24 Switch Device
Power Cord
Rackmount Kits
Rubber Feet
Quick Start Guide
Warranty Information
Compatibility:
All modern, wired, Ethernet-based networks
|
119.99 |
|
|
6235-R Phase III AM/FM 8' Antenna w/20' Cable
Shakespeare's master craftsmen take AM/FM reception to new heights with this hand soldered, hand assembled and hand finished AM/FM antenna. The quality build of this 8’ antenna ensure high performance and durability. The high-gloss polyurethane finish protects the fiberglass from yellowing under UV rays, providing a lasting look of beauty for years to come.
Specifications:
Height: 8’ (2.43m)- Reduced Length
Weight: 9lbs (4kg)
Connector Type: N-Connector
Suggested Mounting: 4187-HD
Boat Length: All
Impedance: 93 ohm
Shakespeare Limited Warranty: 8 years
|
276.48 |
|
|
Jabsco 43990-0000 8-Way Switch
|
103.88 |
|
|
8 Position Switch CLB Vertical
Features:
Available with voltmeters and ammeters
Panels with meters include a toggle switch to monitor voltage on up to three battery banks
Includes 4205-Square Format Label Set
Specifications:
Positions: 8
Nominal Voltage: 12V DC
Maximum Amperage*: 80A
Height: 7.75" (196.85mm)
Width: 4.88" (123.95mm)
Depth: 3.50" (88.9mm)
Weight: 1.69lb (0.77kg)
* Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application.
Includes:
(8) - 7480 - Rocker Switch SPST - ON-OFF
(8) - 7054 - Push Button Reset Only Quick Connect Circuit Breaker - 10 Amps
(1) - 4205 - Basic DC Label Kit - 30 Black Square Labels [LABEL]
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
165.70 |
|
|
8 Position Switch CLB Horizontal
Features:
Available with voltmeters and ammeters
Panels with meters include a toggle switch to monitor voltage on up to three battery banks
Includes 4205-Square Format Label Set
Specifications:
Positions: 8
Nominal Voltage: 12V DC
Maximum Amperage*: 80A
Height: 4.75" (120.65mm)
Width: 9.25" (234.95mm)
Depth: 3.50" (88.9mm)
Weight: 2.89lb (1.31kg)
* Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application.
Includes:
(8) - 7480 - Rocker Switch SPST - ON-OFF
(8) - 7054 - Push Button Reset Only Quick Connect Circuit Breaker - 10 Amps
(1) - 4205 - Basic DC Label Kit - 30 Black Square Labels [LABEL]
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
210.55 |
|
|
8 Position Switch CLB + Meter Vertical
Features:
Available with voltmeters and ammeters
Panels with meters include a toggle switch to monitor voltage on up to three battery banks
Includes 4205-Square Format Label Set
Specifications:
Positions: 8
Nominal Voltage: 12V DC
Maximum Amperage*: 80A per bus
Height: 10.75" (273.05mm)
Width: 4.88" (123.95mm)
Depth: 3.50" (88.9mm)
Weight: 3.66lb (1.66kg)
* Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application.
Includes:
(8) - 7054 - Push Button Reset Only Quick Connect Circuit Breaker - 10 Amps
(8) - 7480 - Rocker Switch SPST - ON-OFF
(1) - 4205 - Basic DC Label Kit - 30 Black Square Labels [LABEL]
(1) - 8003 - DC Analog Voltmeter - 8 to 16V DC (Meter)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
309.37 |
|
|
RayNet to RJ45 Male Cable - 10M
Part #: A80159
RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays.
The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector.
Features:
10M (32.81')
RayNet to SeaTalkhs (RJ45) cable
|
129.98 |
|
|
RayNet to RJ45 Male Cable - 1m
RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays.
The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector.
Features:
1m (3.28ft.)
RayNet to SeaTalkhs (RJ45) cable
The Raynet (F) to RJ45 Ethernet (M) adapter can be used to connect new a, c, e or gS-Series MFDs to the SR6 or 8-Port Seatalk High Speed network switch.
When used in conjunction with a crossover coupler, this adapter can also convert the Ethernet connection on a RJ45 radar scanner cable, DSM or thermal camera for direct-connection to an HS5 network switch, or MFD RayNet port.
|
76.69 |
|
|
Raymarine i70s Sailing System Pack, Wind, Depth, Speed
i70s Multi Display E70327
Maximum Visibility and Maximum Versatility
The i70s multifunction gives you the flexibility to display instrument and
navigation data that is most important to you. Equipped with a bold and
bright 4.1_ display, the i70s is easy-to-customize with digital, analogue
and graphical displays of depth, speed, wind and more. Add the i70s to your
existing Raymarine instrument system or create a network of i70s displays
and sensors, the choice is yours.
Features:
4.1" super bright oversized LCD for maximum visibility
All weather optically bonded display technology delivers brighter
colors, sharper contrast, and a wide viewing angle
Glass bridge industrial design compliments Raymarine eS and gS Series
multifunction displays
Simple user interface with sculpted rubber keypad for precise operation
in all conditions
Customizable data displays of depth, speed, wind and more
SeaTalkng networking for seamless connectivity to Raymarine systems and
NMEA2000* networks
NMEA2000 connectivity* for engine, environment fuel and navigation data
Convenient AIS repeater mode allows you to visually track nearby AIS
targets
Combine the i70s with the ITC-5 instrument transducer convertor and
connect to analog depth, speed, and wind sensors
Network the i70s with Airmar DST800 transducers and the new in-hull P70s
smart transducer
Supplied with both black (eS Series style) & (e Series style) gunmetal
bezels and protective suncover
*NMEA2000 certification pending. A DeviceNet to SeaTalknj adatop is required
for connecting the i70s to NMEA2000 backbone.
Intuitive LightHouse User Interface
The i70s places frequently used navigation functions right at your
fingertips. The LightHouse instrument interface is consistent with Raymarine
LightHouse multifunction displays, so Raymarine MFD users will feel right at
home with the i70s.
Networking
Raymarine i70s allows for connectivity to the following on board networks:
First generation SeaTalk networks using a SeaTalk to SeaTalkng
adapter cable
Current generation SeaTalkng networks
NMEA2000 networks using a SeaTalkng to DeviceNet adaptor
In addition to flexible networking capability the i70s features
user-selectable data sources, for integration with multi-sensor
networks.
AIS Repeater
Display AIS targets from NMEA 2000 AIS receivers. View the closest 25
AIS-equipped vessels and select individual targets to obtain vessel
information.
iTC5 Transducer Converter E70010
The iTC5 Instrument Transducer Converter enables the use of common analog
transducer signals with new digital instrument displays like Raymarine's i70
and ST70 Plus. The ultra-compact iTC5 has connections to host the five most
common analog transducers; depth, speed/temperature, wind, compass and
rudder. The iTC5 instantly converts these 5 analog signals to digital
SeaTalkng protocol.
In addition to providing analog-to-digital conversion, the iTC5 provides all
of the necessary power and communications connections to the transducers.
This greatly simplifies the installation of new systems, and also provides a
simple and cost-effective means for owners of older analog instrument
displays to upgrade to the latest digital display technology. The iTC5
eliminates the need for expensive "smart" transducers or individual
instrument pods. Complete control for calibration and alarms is performed
through the i70 or ST70 Plus instruments.
The iTC5 connects to Raymarine's SeaTalkng network and works with
most analog transducers from legacy Raymarine ST30, ST40, ST50, ST60, ST80
and ST290 series instruments. Additionally the iTC5 works with Raymarine
fluxgate compass modules as well as rotary and linear rudder feedback
transducers to support compass heading and rudder angle instruments.
Features:
All-in-one analog to digital converter for depth,
speed/temperature, wind, compass and rudder transducers
Outputs SeaTalkng and NMEA2000 data to digital instruments,
MFDs and more
Enables easy upgrade of legacy analog instrument displays without
replacing transducers
SeaTalkng network provides all necessary power and data
connections
Ideal for use with Raymarine i70 and ST70 Plus digital instrument
systems
Wind Vane E22078
Standard Forward Wind Transducer, Standard Length: 14 1/2" Includes 100ft. Cable.
DST800 Nylon Thru hull A22154
Raymarine DST800 Nylon Thru Hull Transducer with Depth, Speed, and Temp for
ST60, ITC-5
PACKAGE CONTAINS:
1ea E70327 i70s Instrument
1ea E70010 ITC-5
1ea A22154 DST800 Transducer
1ea E22078 Standard Wind Transducer
1ea A06031 Backbone Terminator
1ea A06074 Inline Terminator
1ea A06068 Backbone Cable 9M
1ea A06049 Power Cable
|
1373.68 |
|
|
iTC-5 Instrument Transducer Converter
The iTC5 Instrument Transducer Converter enables the use of common analog transducer signals with new digital instrument displays like Raymarine's i70 and ST70 Plus. The ultra-compact iTC5 has connections to host the five most common analog transducers; depth, speed/temperature, wind, compass and rudder. The iTC5 instantly converts these 5 analog signals to digital SeaTalkng protocol.
In addition to providing analog-to-digital conversion, the iTC5 provides all of the necessary power and communications connections to the transducers. This greatly simplifies the installation of new systems, and also provides a simple and cost-effective means for owners of older analog instrument displays to upgrade to the latest digital display technology. The iTC5 eliminates the need for expensive "smart" transducers or individual instrument pods. Complete control for calibration and alarms is performed through the i70 or ST70 Plus instruments.
The iTC5 connects to Raymarine's SeaTalkng network and works with most analog transducers from legacy Raymarine ST30, ST40, ST50, ST60, ST80 and ST290 series instruments. Additionally the iTC5 works with Raymarine fluxgate compass modules as well as rotary and linear rudder feedback transducers to support compass heading and rudder angle instruments.
Features:
All-in-one analog to digital converter for depth, speed/temperature, wind, compass and rudder transducers
Outputs SeaTalkng and NMEA2000 data to digital instruments, MFDs and more
Enables easy upgrade of legacy analog instrument displays without replacing transducers
SeaTalkng network provides all necessary power and data connections
Ideal for use with Raymarine i70 and ST70 Plus digital instrument systems
|
327.71 |
|
|
SeaTalk 1 to SeaTalkng Converter Kit
The SeaTalk 1 to Seatalkng converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems. The SeaTalk to SeaTalkng Converter kit is a compact solution that connects in-line with the SeaTalkng instrument network.
The converter kit includes all of the necessary components to interface to SeaTalk 1 devices, and establish basic SeaTalkng connectivity on the vessel including:
SeaTalk 1 to SeaTalkng converter
SeaTalkng Terminators (x2)
SeaTalkng Blanking Plugs (x2)
400mm (15") SeaTalk 1 to SeaTalkng converter cable
SeaTalkng power cable
1m (3.3') SeaTalkng spur cable
Features:
Easy plug-and-play connectivity with SeaTalkng networks.
Works with select SeaTalk 1 instruments, GPS sensors and LifeTag.
Included SeaTalkng components establish basic backbone connectivity.
Easily expanded using Raymairne SeaTalkng network components.
|
119.99 |
|