|
Pulsafeeder LMH6TA-KTC3-130 120Gpd @100Psi 115V Met Pmp
|
2335.65 |
|
|
Pulsafeeder LMH6TA-KTC3-500 120Gpd 115V Pvdf/Tef Meter
Max Flow: 5.00 gph (120 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVDF (Kynar)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 1/2" OD
Options: 5 Function Valve
Control: Signal Level Control
Pulsafeeder Pulsatron Series MP Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
2374.20 |
|
|
Pulsafeeder LC04SA-PHC1-XXX Metering Pump 24Gpd 115V
|
537.19 |
|
|
Pulsafeeder LB64SA-VHC1-XXX Metering Pump 30Gpd Hypalon
Max Flow: 1.25 gph (30 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVC (Polyvinyl Chloride)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB64SA-VHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
Pulsafeeder LPE4SA-PTT1-XXX Metering Pump
Max Flow: 1.85 gph (44 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: GFPPL (Glass Filled Polypropylene)
Seats / O-Rings: TFE (Teflon)
Balls: TFE (Teflon)
Tubing: 3/8" OD
Control: Manual On/Off
The Pulsafeeder Pulsatron LPE4SA-PTT1-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.
Features:
- Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model.
- Manual control of stroke rate and length via control knobs on the front of the pump.
- Fuse mounted on the panel for extra protection.
- Designed out of water resistant material (perfect for indoor & outdoor placement).
|
1139.40 |
|
|
Pulsafeeder LB02SA-PHC1-XXX 6 Gpd 150 Psi 115V Pump
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: GFPPL (Glass Filled Polypropylene)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-PHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
Pulsafeeder UD10-XL-LSAUXXX Dolphin 10 Pmp 240V 50/60Hz
INLET SIZE: 1/4 in
HOUSING: Chemical Resistant Resin
MOTOR HZ RATING: 50/60
MOTOR VOLTAGE: 230 VAC
OUTLET SIZE: 1/4 in
MAX FLOW: 13 gpd
MAX PRESSURE: 25 psi (1.72 bar)
INJECTION FITTING: PVC
DISPLACEMENT: Positive Displacement
|
640.31 |
|
|
Pulsafeeder LC54SAPTC1-500 30Gpd 115V Polypr/Tef Meter
|
637.50 |
|
|
Pulsafeeder LB02SA-VHC1-XXX Pump A Plus 6Gpd
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVC (Polyvinyl Chloride)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-VHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
Pulsafeeder LB64SA-PHC1-XXX Pump 30 Gpd A Plus
Max Flow: 1.25 gph (30 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: GFPPL (Glass Filled Polypropylene)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB64SA-PHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
Pulsafeeder LB02SA-VTC1-XXX Pump A Plus 6Gpd
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVC (Polyvinyl Chloride)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-VTC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
690.94 |
|
|
Pulsafeeder X030-XA-BBA-9XXX 30Gpd De-Gas Chemtech 115V
|
705.00 |
|
|
Pulsafeeder X015-XA-BBA-9XXX 15Gpd De-Gas Chemtech 115V
|
740.63 |
|
|
Pulsafeeder X024-XA-BBA-9XXX 24Gpd De-Gas Chemtech 115V
|
740.63 |
|
|
Pulsafeeder LB02SA-KTC1-XXX Pump A Plus 6Gpd
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVDF (Kynar)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-KTC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
743.40 |
|