|
Marine Outboard Motor Bracket - Aluminum - Max 15HP 4-Stroke
Adjustable outboard motor bracket is designed for 2- and 4-stroke motors up to 15 HP or 132 lbs. Constructed of hard-coat anodized aluminum and hand adjustable with the turn of a knob. Stainless steel torsion springs counterbalance the motor weight making adjustments a breeze. 10" of travel and 5 vertical running positions let you fine tune the motor height for optimal performance. Meets ABYC Standards. (Do not use without Panther 55-0415 safety cable—included.)
|
267.18 |
|
|
Marine Outboard Motor Bracket - Aluminum - Max 20HP
This adjustable outboard motor bracket is designed for motors up to 20 HP or 115 lbs. Its heavy-duty, light weight aluminum is designed for fresh water use on both powerboats and sail boats. Unit is spring loaded. 11 in. of travel with 5 stops.( Not to be used with 4 stroke engines.)
Features:
Lightweight design
Sturdy, durable aluminum
Travel distance of bracket is 11 in. with 5 stops
Spring-loaded bracket
|
195.41 |
|
|
Marine Outboard Motor Bracket - Aluminum - Fixed 25HP
Features:
The fixed kicker motor bracket is designed for adjustable mount on the transom. Designed for the heavier 4-stroke motors.
5" height adjustment will accommodate long- and short-shaft motors.
8 1/2” setback - weighs 13lbs.
|
282.82 |
|
|
Outboard Motor Bracket - Aluminum - Max 12HP
Adjustable outboard motor bracket is designed for motors up to 12hp or 82lbs. This light weight aluminum bracket is designed for freshwater use on both powerboats and sail boats.
Features:
Same design as the 55-0021.
This heavy duty, lightweight aluminum bracket is designed for motors up to 12hp or 82lbs max weight
Spring loaded (14”of travel with 5 stops)
Do not use without Panther safety cable 55-0415—NOT included)
Not to be used with 4 stroke engines
|
173.22 |
|
|
Marine Outboard Motor Bracket - Stainless Steel - Fixed 15HP
Features:
For engines up to 12hp and 85 lbs max weight (39kg).
Heavy-duty Stainless Steel.
Rugged Polypropylene mounting board (2" [5cm] thick).
Includes mounting hardware.
recommend using safety cable— not included
|
94.74 |
|
|
Marine Outboard Motor Bracket - Stainless Steel - Fixed 35HP
Features:
Works with 4- and 2-Stroke motors up to 35hp and 263 lbs max weight (119kg).
Rugged Polypropylene mounting board (2" [5cm] thick).
Includes stainless steel mounting hardware and safety cable. (Do not use without safety cable)
|
127.10 |
|
|
Swim Platform Outboard Motor Bracket
Built extra-tough and extra-wide for auxiliary motors. The mounting board is 2” thick weatherproof and maintenance-free polypropylene. Adjustable for long or short shaft engines. Position trim adjustment available by moving bolts on bracket. Rated for outboards up to 20 HP.
Features:
Adjustable outboard motor bracket designed to mount on most swim platforms
Rated for 2- and 4- stroke motors up to 20HP
Constructed of black powder-coated aluminum and can be adjusted to fit most platform heights and motor shaft lengths for optimum prop depth and performance
Comes complete with a transom support bar for weight support and torque resistance
Do NOT use without Panther 55-0415 safety cable – included
|
312.90 |
|
|
Outboard Motor Bracket - Stainless Steel - Max 10HP
Stainless Steel Outboard Motor Bracket Up to 10 horse power. The Adjustable outboard motor bracket is stainless steel construction and non-corrosive for saltwater use. Designed for use with power or sail boats. Manual operation means no power required to raise and lower your auxiliary outboard motor. Features Stainless Steel Construction Fits Motors up to 10 horse power at 110 pounds.14" travel.
|
136.80 |
|
|
Outboard Safety Cable Stainless Steel for Motor Bracket
Features:
Braided, stainless steel cable, plastic coated for protection.
For use with all outboard motor brackets to secure the motor to your boat.
*All Panther 4-stroke brackets come with Panther safety cable.
|
15.52 |
|
|
Premium Replacement Outboard Starter for Yamaha F115, 4 Stroke
This outboard starter will fit Yamaha F115, 4 Stroke - 2000-Up, LF115, 4 Stroke - 2000-Up, and 13-tooth drive gear.
ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.
Features:
Dynamically tested and packaged for out-of-the-box performance
Nickel-coated and/or epoxy-painted to reduce corrosion
Sealed to minimize water intrusion
Designed for long life and optimum performance
Armatures are tested to withstand 50 times operating voltages (12 volts)
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
HITACHI Outboard Starter S114-838A
MERCURY Outboard Starter 50-881368T1
MERCURY Outboard Starter 50-881368T2
MERCURY Outboard Starter 8M0007971
YAMAHA Outboard Starter 68V-81800-00
YAMAHA Outboard Starter 68V-81800-01
YAMAHA Outboard Starter 6C5-81800-00
YAMAHA Outboard Starter 6CJ-81800-00
SIERRA Outboard Starter 18-6427
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
451.88 |
|
|
Trolling Motor Bracket
Raymarine's Trolling Motor Bracket is made specifically for Raymarine's Dragonfly Transducer.
|
114.98 |
|
|
Trolling Motor Bracket
Trolling Motor Bracket specifically designed for the Dragonfly CPT-DV and CPT-DVS transom mount transducers.
|
40.90 |
|
|
T232 Mast Bracket 2Up, Maxi, Dual Maxi or Race Master
The Raymarine Wireless T232 Dual Instrument Mast Bracket is used for combining two Race Master displays or (2) Maxi / Dual Maxi Displays together. This allows simultaneous display of Heading, Speed, Depth, and Head / Lift wind information. All you need are (8) 4.8 mm rivets suitable for your mast.
|
234.98 |
|
|
4-Stroke Bracket with 16" Vertical Travel
Features:
Adjust your trolling or auxiliary motor to four vertical running positions for changing water or load conditions.
The anodized aluminum bracket is built to handle the increased weight and torque output of today’s four strokes with long or short shafts.
Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight making adjustments a breeze, while the 2”-thick, extra-wide mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance.
Handles up to 35 HP, 263 lbs. motors with 16″ of travel. Meets ABYC Standards. (Do not use without Panther 55-0415 safety cable—included.)
|
327.35 |
|
|
4 Blade aluminum propeller for 8-15 horsepower engines with 13 tooth spline and thru hub exhaust. 2-1/2" gear case. 8HP (4-Stroke) 1996-2005; 9.9, 15HP (2-Stroke) 1974-2005; 9.9, 15HP (4-Stroke) 1995-2001
|
78.99 |
|