|
Marine Monoblock Amplifier -1600W
From the leaders in Marine Audio engineering. It takes a lot of amplifier power for your bass notes to be heard clearly over the sounds of the waves, wind, and engine noise.
The GM-ME500X1 features a low-pass and a subsonic filter to tune the bass tones to match your subs and make them sound good. Conformal coated circuit boards and rubber connection/control covers keep water and dirt away from sensitive areas.
Features:
Matched Power Ratings for optimal use with Pioneer Marine Speakers and Subwoofers
Conformal coated circuit boards
Rubber covers protect side panel controls, RCA terminals, and fuses
Preamp and speaker-level inputs
Technical Specifications:
Number of Channels - 1
Frequency Response - 10 - 240 Hz
2 Ohm RMS Power Per Channel - 500W
4 Ohm RMS Power Per Channel - 300W
Signal-to-Noise Ratio - 75dB
Dimensions (L x W x H) - 10-3/4" x 8-7/16" x 2-7/`6"
*Sold as an Individual
|
149.99 |
|
|
HYDRO Nano Marine Monoblock Amplifier - 700W
Whether you are the type of audio enthusiast that likes to hit the open road on his bike, ride the rough trails on your side by side, or cruise the open waters, you are going to need a powerful and waterproof rated amp that has a small footprint and also make great power.
DS18 has a line just for the job with the NXL series of amplifiers to power your whole system. This Monoblock amplifier helps you accommodate for all your different speaker setups without having to look further. Being a full range amps, these can be run on subs, mids, or tweeters because of the internal design of the amp.
All units have stable and reliable 4-layer PCB layouts, IPX67 rated for power sports, has an ultra-compact size for easy installation, and has audio precision quality control verification.
Features:
Stable and reliable 4 layers PCB layout design
IPX67 Waterproof for Powersports applications
Ultra compact size for easy installation
Audio precision quality control verification
Technical Specifications:
Number of Channels - 1
Frequency Response - 20 - 500Kz
2 Ohm RMS Power Per Channel - 230W
4 Ohm RMS Power Per Channel - 140W
Signal-to-Noise Ratio - 90dB
Dimensions (L x W x H) - 200mm x 93.4mm x 39.8mm
*Sold as an Individual
|
335.94 |
|
|
Candy-X4B 4 Channel Amplifier - 1600W
Small, compact, and powerful is what the DS18 Candy-X4B amplifier is all about. Just like edible candy, we have many different flavors to choose from to give audio enthusiasts goosebumps when they turn it up. Instead of making your mouth tingle, DS18 Candy Amplifiers make your ears tingle with pleasure when you hook them up to any line of pro audio, marine, and power sports audio.
These amplifiers not only have the power to keep your speakers at maximum wattage efficiently, but they are also very small and compact in design so they can be mounted almost anywhere and still not have to worry about room.
DS18 Candy amplifiers are perfect for people who want a very small audio footprint with also having all the benefits of a huge amplifier putting out lots of power in a small package.
Features:
One of our most popular lines of automobile amplifiers because of its power output to size ratio
Small and powerful design that gives it a wide range of versatility because of its size
High-grade components made to stand the test of time and give you loud sound on demand
RCA and Hi/Lo inputs so you can integrate this amp into your factory audio system easily
Technical Specifications:
Number of Channels - 4
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power (14.4V) Per Channel - 4 x 120W
4 Ohm RMS Power (14.4V) Per Channel - 4 x 80W
Signal-to-Noise Ratio - >100dB
Product Dimensions: (L x W x H) - 9.21" x 5" x 1.87" (23.4 x 12.7 x 4.75 cm)
*Sold as an Individual
|
239.94 |
|
|
NXL-X600.4D 4-Channel Marine Amplifier - 1600W
The DS18 NXL Series was developed for people who want a very small audio footprint that is capable of putting out lots of power and sound in a small and waterproof package.
The NXL Series of amps are one of our most efficient lines with great power output all while withstanding the elements.
Being a full-range amplifier, they can be integrated with and run on subwoofers, mid-ranges, and tweeters. The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience.
All NXL Series amplifiers have stable and reliable 4-layer PCB layouts, an IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification.
The NXL Marine Amplifier series is exactly what the outdoors lover will need for their boat or vehicle audio to brave the trails, enjoy the lake, or any situation that needs a strong versatile waterproof amplifier.
Features:
Multiple channel input selector - 2 or 4 channel
IPX6 Waterproof for Powersports applications
Ultra-compact size for easy installation
Audio precision quality control verification
Technical Specifications:
Number of Channels - 4
Frequency Response - 10Hz - 20KHz
2 Ohm RMS Power (14.4V) Per Channel - 4 x 200W
4 Ohm RMS Power (14.4V) Per Channel - 4 x 150W
4 Ohm RMS Power Bridge (14.4V) Channel - 2 x 400W
Signal-to-Noise Ratio - >85dB
Product Dimensions: (L x W x H) - 9.92" x 4.4" x 1.77" (252mm x 112mm x 45mm)
*Sold as an Individual
|
599.94 |
|
|
NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm
Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint!
As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power.
The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power.
Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to!
This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels.
Order the NXL-M4 for insane power out on the water!
Features:
Hardware resistant to corrosion and UV Protection
Coated 4 Layers PCB to prevent corrosion
IPX5 Water Resistance Grade
High Level Input For Radio Use
Front cover to keep the controls safe to the elements
LED Clip Indicator to easier adjustment
Stable and Reliable Class D Circuit Design
Sound Quality Verification Using AP Instruments
Direct Insert Power and Speaker Terminals
Short Circuit, Thermal, and Voltage Protection
Technical Specifications:
Number of Channels - 4
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power Per Channel - 4 x 230W
4 Ohm RMS Power Per Channel - 4 x 150W
4 Ohm RMS Power Bridge Channel - 2 x 440W
Signal-to-Noise Ratio - >90dB
Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7"
*Sold as an Individual
|
479.94 |
|
|
Apollo™ Marine Zone Amplifier - 140W
Amplify the moment with an Apollo™ marine amplifier – designed specifically for use with your Fusion DSP-enabled marine stereo and Fusion speakers.
This efficient zone amplifier provides audio zone expansion for high-quality sound in more areas on your boat. With 20-watt RMS per channel (at 4 ohms), this 2 channel amplifier allows you to add an extra pair of speakers on board. The Easy Tune feature automatically regulates audio settings for the best sound quality without manual adjustments (Requires setup using the Fusion-Link™ app on a compatible smartphone).
Fusion Apollo AP-DA214
Features:
RMS Power - 20-watt RMS per channel (at 4 ohms), allowing you to add an extra pair of speakers on board.
Efficient Class-D Design - Uses less power, so you can listen to music for longer at higher volumes, with less drain on the battery.
Easy Tune Feature - Automatically adjusts audio settings for the best possible sound quality with no manual adjustments required (Requires setup using the Fusion-Link app on a compatible smartphone).
Compact Design - The compact size of the zone amplifier makes it a versatile option for mounting on board.
LED Indicator - Show issues with electrical currents and shorts as well as temperature.
Less Total Harmonic Distortion - The amplifier is designed with minimal distortion and noise, allowing for better quality audio.
Ignition Protected - Intelligent electronic fuse prevents damage from over/under current, temperature, output short, and other faults.
Conformal Coated PCBs - The amplifier circuit board has been specially coated to provide enhanced protection from the marine elements.
Powder Coated Aluminum Finish - Salt fog, temperature, vibration, and UV tested with a modern aesthetic design to add style to your boat.
Easy Installation - A mounting bracket is included in the box allowing you to simply clip the amplifier in place for a clean finish.
12- and 24-Volt Compatible - The zone amplifier is designed to work with both 12- and 24-volt electrical systems.
True-Marine™ Design - Designed to withstand the harshest marine environments season after season, the zone amplifier is IPX7 rated and comes with a 3-year warranty.
Technical Specifications:
Peak Power - 140 Watts
Power at 4 ohm - 20 Watt RMS
Power at 2 ohm - 30 Watt RMS
Operating Voltage - 10.8 to 32 VDC
Class D Amplifier
Water Rating - IPX7
Dimensions with bracket (W x H x D) - 3.94" x 4.53" x 1.89"
Dimensions without bracket (W x H x D) - 3.94" x 3.94" x 1.57"
Weight - 1.01 pounds
In the Box:
One Apollo zone amplifier
One mounting bracket
Three 6-gauge, self-tapping screws
Wiring loom
Installation instructions
Important safety and product information (ISPI)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
215.99 |
|
|
NXL-M2 Full Range 2 Channel IPX5 Marine Grade Amplifier - 250 x 2W @ 4-Ohm
Designed for intense sessions that keep the party boat rocking all night long; the NXL-M2 is DS18’s high-quality, powerful amplifier for the aquatics lover looking for a big sound with a small footprint!
As a Class D Digital amplifier, the NXL-M2 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power.
The NXL-M2 handles 250W x 2CH @ 4 Ohms; 400W x 2CH @ 2 Ohms; and 880W x 1CH @ 4 Ohms Bridge of RMS Power and 1500W Peak Power.
Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to!
This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels.
Order the NXL-M2 for insane power out on the water!
Features:
IPX5 Water Resistance Grade
Hardware resistant to corrosion and UV Protection
Coated 4 Layers PCB to prevent corrosion
High level input for radio use
2 Tinned OFC RCA Inputs and Outputs
Front cover to keep the controls safe to the elements
LED Clip Indicator to easier adjustment
Stable and Reliable Class D Circuit Design
Sound Quality Verification Using AP Instruments
Direct Insert Power and Speaker Terminals
Short Circuit, Thermal, and Voltage Protection
Technical Specifications:
Number of Channels - 2
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power Per Channel - 2 x 400W
4 Ohm RMS Power Per Channel - 2 x 250W
4 Ohm RMS Power Bridge Channel - 1 x 880W
Signal-to-Noise Ratio - >90dB
Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7"
*Sold as an Individual
|
479.94 |
|
|
4-Channel Marine Waterproof Amplifier - Class D Full-Range - 4 Ohms 200x4 RMS
The NVY-T800.4D: a versatile 4-channel amplifier designed for high-quality audio reproduction and unbreakable durability.
The NVY-T800.4D was designed to withstand the harshest elements: its IPX6 waterproof rating and UV/SALT/Fog Protection, paired with its surface mount component technology and direct harness design allows this amplifier to be installed anywhere easily without sacrificing space!
Its wide range of protection features, including thermal protection, overload protection, short circuit output protection, and voltage input protection ensures the safety and longevity of the NVY-T800.4D.
Equipped with selectable high-pass, low-pass, and flat crossover filters; the NVY-T800.4D allows you to customize your sound to your liking.
This full-range amplifier covers ranges from 20Hz-20KHz and has a signal-to-noise ratio of >80dB for crisp and clear audio with minimal distortion.
With a peak power output of 2400W and RMS power of 4 x 200W @ 4 ohms, 4 x 300W @ 2 ohms, and 2 x 600W @ 4-ohm bridge, the NVY-T800.4D is perfect for powering any speakers in your marine audio system.
Be prepared for everything with the NVY-T800.4D!
Features:
IPX6 Waterproof Rating
UV, Salt, and Fog protection
High Power Output
Full Range Amplifier
Customizable Sound With Selectable Crossover Filters
High-Quality Protection Features
Durable design suitable for use in harsh environments
Power Specifications:
Total Watts (Peak): 2400W
RMS Power @ 4 ohm: 4 x 200W
RMS Power @ 2 ohm: 4 x 300W
RMS Power @ 4 ohm Bridge: 2 x 600W
Audio Specifications:
Frequency Response: 20Hz-20KHz
Signal Noise Ratio: >80dB
Efficiency @ 4ohm: 0.85
Damping Factor: >100
Input Impedance: 20Kohms
Channel Separation: >55dB
Total Harmonic Distortion (THD): 0.0005
Low-Level Input Range: 200mV-5V
Selectable X-Over: HPF/LPF/FLAT
X-Over Filter Range: 40Hz-3KHz
Great For:
Marine Audio
Powersports Audio
|
1079.94 |
|
|
NXL 8-Channel Full-Range Class D Marine/Powersports Amplifier - 8 x 150W RMS, 4-Ohm
Elevate your marine sound experience to new heights with DS18's NXL-X1200.8D. Designed to deliver the best performance for your marine speakers, this digital class 8-channel amplifier is the ultimate choice for those who refuse to settle for anything less than exceptional.
Not only does DS18's NXL-X1200.8D deliver unparalleled performance, but it’s also IP67 Waterproof Rated, protecting against water intrusion. Additionally, this amplifier is built to withstand harsh marine conditions with its UV, Salt, and Fog protection. It's designed to endure whatever nature throws at it without compromising sound quality.
With its Direct Power harness design featuring marine-grade OFC tinned wires, this amplifier ensures optimal power transfer and efficiency. Every detail has been carefully crafted to provide you with a seamless and hassle-free installation process.
Experience the future of marine amplification with the latest digital amplifier design and SMC technology. This cutting-edge combination enhances audio clarity and precision, allowing you to enjoy every note with exceptional clarity and detail.
Prepare to be blown away by the NXL-X1200.8D's staggering performance, delivering 8 x 150W RMS at 4 ohms, 8 x 220W RMS at 2 ohms, and 4 x 450W RMS @ 1 ohm. These power settings are guaranteed to supercharge any custom marine build.
Don't settle for mediocre sound on your boat or power sports vehicle. Upgrade to the DS18 NXL-X1200.8D Marine & Powersports Digital Amplifier and unleash the true potential of your marine speakers.
Features:
Marine Full Range
8 Channel
8 X 150 Watts @ 4 Ohms
Built-in Crossover
Class D
Water Resistant - IP67
Technical Specifications:
Number of Channels - 8
Frequency Response - 10Hz-20Khz
4 Ohm RMS Power - 8 x 150W
2 Ohm RMS Power - 8 x 220W
Signal-to-Noise Ratio - >80dB
Product Dimensions (L x W x H) - 14" x 4.4" x 1.77"
|
959.94 |
|
|
NXL 1-Channel Full-Range Class D Marine/Powersports Amplifier - 1500W RMS, 1-Ohm
Elevate your marine sound experience to new heights with DS18's NXL-X1500.1FR. Designed to deliver the best performance for your marine speakers, this digital class amplifier is the ultimate choice for those who refuse to settle for anything less than exceptional.
Featuring an innovative Input Selector, this amplifier allows you to effortlessly choose between multiple signal sources. This flexibility ensures that you can easily customize your audio setup according to your preferences. This amplifier’s Full Range Capabilities also give users the option of powering either subs or mids and highs.
Not only does DS18's NXL-X1500.1FR deliver unparalleled performance, but it also boasts an IPX6 Waterproof Rating, protecting against water intrusion. Additionally, this amplifier is built to withstand harsh marine conditions with its UV, Salt, and Fog protection. It's designed to endure whatever nature throws at it without compromising sound quality.
With its Direct Power harness design featuring marine-grade OFC tinned wires, this amplifier ensures optimal power transfer and efficiency. We’ve also included a 150A Fuse to protect you and your boat from almost any electrical short related to the amp's installation. Every detail has been carefully crafted to provide you with a seamless and hassle-free installation process.
Experience the future of marine amplification with the latest digital amplifier design and SMC technology, including both high pass and low pass filters for the one output channel. This bandpass filter system enhances audio clarity and precision, allowing you to enjoy every note with exceptional clarity and detail.
Prepare to be blown away by the NXL-X1500.1FR's staggering performance, delivering 700W RMS at 4 ohms, 1000W RMS at 2 ohms, and 1500W RMS @ 1 ohm. These power settings are guaranteed to supercharge any custom marine build.
Don't settle for mediocre sound on your boat or power sports vehicle. Upgrade to the DS18 NXL-X1500.1FR Marine & Powersports Digital Amplifier and unleash the true potential of your marine speakers.
Features:
Marine Full Range
1 Channel
1 X 1500 Watts @ 1 Ohm
Built-in Crossover
Class D
Water Resistant - IP67
Technical Specifications:
Number of Channels - 1
Frequency Response - 10Hz-250Hz
4 Ohm RMS Power - 700W
2 Ohm RMS Power - 1000W
Signal-to-Noise Ratio - >81dB
Product Dimensions (L x W x H) - 13.4" x 4.4" x 1.77"
|
659.94 |
|
|
FUSION Apollo™ amplifiers are the difference between hearing the music and feeling it. They are efficient, easy-to-install, and work with your compatible FUSION stereo system. The compact zone amplifier provides audio zone expansion for high-quality sound in more zones onboard your boat. The monoblock and multichannel amplifiers add extra power to your system. They all use less power, so you can listen to music longer with less drain on your battery. Plus, the Easy Tune feature automatically regulates audio settings for the best sound quality without manual adjustments. Know about electrical or temperature issues with just a glance at the amplifier’s LED indicators. The included mounting brackets make this amplifier easy to install and ideal for your setup.
The Following FUSION Apollo™ Amplifiers Are Now Available:
2000-WATT MONOBLOCK AMPLIFIER: Add extra power to your system with this 2000-watt (650-watt RMS at 4 ohms) monoblock amplifier that’s specifically designed to power a subwoofer.
1200-WATT 4 CHANNEL AMPLIFIER: This 4 channel amplifier with 150-watt RMS per channel at 4 ohms can power up to four pairs of speakers or two pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power.
1800-WATT 6 CHANNEL AMPLIFIER: This 6 channel amplifier with 150-watt RMS per channel at 4 ohms can power up to six pairs of speakers or four pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power.
2400-WATT 8 CHANNEL AMPLIFIER: This 8 channel amplifier with 150-watt RMS per channel at 4 ohms can power up to eight pairs of speakers or four pairs of speakers and two subwoofers. It includes high-power mode adapters for simple bridging to increase power.
140-WATT ZONE AMPLIFIER: The compact zone amplifier provides audio zone expansion for high-quality sound in more areas on your boat. It’s compatible with 12- and 24-volt electrical systems.
Specials Closeouts Remanufactured Rebates
|
|
|
Apollo Monoblock Marine 650-Watt RMS Amplifier
Add extra power to a system with this 2000-watt (650-watt RMS) monoblock amplifier that’s specifically designed to power a subwoofer. This efficient, easy-to-install monoblock amplifier works with your compatible Fusion stereo system.
Features:
Keep the music going for longer without draining your battery as quickly
No more manual adjustments to your audio settings. The Easy Tune feature does it for you
A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating
Less distortion and noise, so you enjoy quality audio
Mounting brackets are included for simple installation
Don’t worry about potential overheating damage with our ignition protection design
Power & Efficiency
The Apollo amplifiers are designed to produce impressive power with less drain on your battery. The monoblock produces 650-watt RMS.
Easy Tune Feature
These amplifiers use the Easy Tune feature, which automatically regulates audio settings. So, users can get the best quality sound without making manual adjustments.
Less Distortion
Some amplifiers distort audio when they add power. Fusions are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes.
LED Indicators
Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts, as well as temperature.
Mounting Brackets
Easily install the amplifiers on board with the included mounting brackets.
Ignition Protected
The ignition-protected design helps prevent potential damage from overheating.
Conformal-Coated PCBS
The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements.
2 OHM Stable
Connect up to two speakers per channel, increasing setup options.
Fusion True-Marine Design
The amplifier is designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration, and UV.
In the Box:
One Apollo monoblock amplifier
One mounting bracket
One power connector
One speaker connector
Four 8-gauge, flat-head self-tapping screws
Four 8-gauge, pan-head self-tapping screws (for mounting bracket)
Four screw covers
Fuse holder
Mounting template
Installation instructions
Important safety and product information (ISPI)
Specifications:
Physical Dimensions without Bracket (L x W x H): 9.25" x 7.06" x 1.75" (235 x 180 x 45 mm)
Physical Dimensions with Bracket (L x W x H): 9.25" x 7.06" x 2.13" (235 x 180 x 50 mm)
Weight: 4.85 lb (2.2 kg)
Water Rating: IPX2
Amplifier Class: Class-D
CEA-2006 Power Rating: 650 watts RMS x 1 @ 14.4 V input, 4 ohms, < 1% THD
Total Rated Power Output, 2 Ohm (Watts): 1100 watts RMS x 1 @ 14.4 V input, 2 ohm < 1% THD
Peak Power (watts): 2000 watts
Input Sensitivity: 2.15 V RMS
Input Impedance: 22k ohm
Operating Voltage: 10.8 V - 16 V DC
Current Draw, in Standby/off Using Amplifier on Wire: < 5 mA @ 14.4 V input
Current Draw, On, No Audio: < 1.15 A @ 14.4 V input
Fuse Rating: 125 A electronic fuse (no replacement necessary)
Power-Cable Fuse Model and Rating: Bussmann™ BK/AMI-030 30 A fast-acting
Ignition Safety Protected (SAE J1171): Yes
Protection Circuits: Reverse voltage, input under/over voltage, over temperature, and output short circuit
Operating temperature range: 32° to 122° F (0° to 50° C)
Warranty: 3 years
|
779.99 |
|
|
Flush/Surface Mount 6-Channel Class D Amplifier with Acrylic Cover - 6x180W RMS @ 4 Ohm
Enhance your car audio system with DS18’s FX6!
Designed and manufactured for professional car audio applications, this amplifier delivers exceptional power and high-quality sound while maintaining a small footprint for easy installation.
What sets the FX Series apart is its versatile installation options. Unlike ordinary amplifiers, these amplifiers come equipped with a surface mount adapter, allowing for both flush and surface installation. This feature provides flexibility in positioning the amplifier, making it perfect for custom car audio builds. Not only does it guarantee optimal performance without compromising on space or aesthetics, but it also incorporates mesmerizing Digital LED lights that add a touch of style and flair to your car audio setup.
Let's talk power! DS18’s FX6 delivers an impressive MAX power of 4500W. With RMS power outputs of 6 x 180W at 4 ohms, 6 x 250W at 2 ohms, and 3 x 500W at 4 ohms bridge, you can expect nothing less than thunderous sound quality.
In addition to its impressive power capabilities, this amplifier also offers a wide range of audio features. With a frequency response of 20Hz-20KHz, a signal-to-noise ratio of 80dB, and a damping factor of 80, you can enjoy a full spectrum of sound with exceptional clarity. The selectable X-Over feature allows you to customize your audio experience, while the bass boost range and frequency allow you to fine-tune your system to your liking.
Upgrade your car audio system with DS18’s FX6 and experience unmatched power, versatility, and sound quality!
*The FX Series adapters are not designed to be water-resistant. Please exercise caution to prevent water contact with the RGB LEDs, as exposure may result in a short circuit*
Features:
6 Channel Full Range
Flush Mount / Surface Mount
6 X 180 Watts RMS @ 4 Ohm
CLASS D
RGB Dream LED Lights
Built-in Crossover / Water Resistant
Technical Specifications:
Number of Channels - 6
Frequency Response - 20Hz-20kHZ
4 Ohm RMS Power - 6x180W
2 Ohm RMS Power - 6x250W
Signal-to-Noise Ratio - >80dB
Product Dimensions - 14.25"L x 4.7"W x 1.85"H
|
839.94 |
|
|
Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.
The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces!
For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.
SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html
Specials Closeouts Remanufactured Rebates
|
|
|
Apollo™ Zone Marine Amplifier Mounting Bracket
This mounting bracket is essential for installing your Apollo Marine Zone Amplifier correctly. Simply secure the bracket to a flat surface and clip the amplifier in place, for a clean and tidy finish.
Technical Specifications:
Dimensions (WxHxD) - 3.94" x 3.94" x .3"
In the Box:
Mounting bracket
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
10.66 |
|