Safety Whistle with Lanyards - 2-Pack Bright Orange Whistle (2-Pack) with a hanging lanyard, durable, SOLAS and USCG approved for day or night signal, weather resistant, plastic construction delivers a loud, shrill signal (116 dB at 1M). The perfect device to attach to all of your PFDs.   Features: SOLAS Approved USCG Approved Weather Resistant Includes Hanging Lanyard Durable Color: Bright Orange

Signaling Kit - Flag, Mirror, Dye Marker & Whistle Selection of visual and audible signals that can be seen or heard by sea or air rescues.  Pack in a polybag.   Includes: 1 USCG Approved Distress Flag Approved for daytime use only 3' x 3' with 4 ties Bright Orange with International distress sign printed in black Meets NY and OH requirements 1 Safety Whistle w/Lanyard Measured at 116 db at 1M Pealess design won't freeze High visibility orange plastic construction 1 Signaling mirror with lanyard Non corrosive material 1 1oz Highly Visible Green Fluorescent Dye Marker WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Survival Res-Q™ Whistle with Lanyard  Get attention when you need it with the ResQ™ Whistle.  This compact survival whistle was specially developed to locate boaters who’ve fallen overboard, but it can also aid in land rescues.  The ResQ issues a shrill dual-tone up to 100 decibels, which is audible over great distances.  The unique, flat design of this whistle keeps it from holding water, and its 31.5" (80 cm) lanyard easily attaches to life jackets, rafts, and other weather gear.  Features: Loud, shrill, dual tone audible from great distance Unique flat design Meets USCG/SOLAS requirements Aids in land or sea rescues *Sold as an Individual 

Groco Sbv-3000-P Safety Seacock W/Side Port  Groco- Safety Seacock with Side Port

1-1/4" Safety Seacock w/1" Side Port  Features: Two driver ports permit handle relocation. NPT threaded side port accepts SSCV or any NPT threaded accessory. Handle has square hole that accepts standard ratchet; helps access hard-to-reach valves, or ease actuation of hard-to-operate valves. Full flow. Serviceable while installed. C84400 bronze construction. Stainless steel ball and stem. Base has bonding attachment. PTFE seats and seals.   ***Add a GROCO Bilge Strainer to pump out remote bilge locations.  

Tethered 1/4" Spring Loaded Clevis Pin w/Lanyard For use with Attwood deck or rail mounted bimini top hinge fittings that use removable 1/4" spring-loaded clevis pins. This handy 1/4" spring-load clevis pin with lanyard allows the pin to be tethered to prevent loss of the pin when it is removed from the bimini top deck or rail hinge fitting.

Signaling Mirror with Lanyard High quality, durable construction, will not corrode due to effects of salt water. Features: View finder and lanyard Visiblity to 10 miles Measures 3" x 4" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Safety Bailer Kit Waterproof emergency flashlight, Bailer with easy-grip handle, 50' (15.2 m) marine rope with float, Pea-less flat safety whistle with lanyard, Seamless "O" Ring. Features: For use where a bailing device is required Integrated handle is easy to grip Includes a water tight lid and functions as a dry storage container *Note: Two (2) AA batteries required, but not included, for the 5-piece Bailer Safety Kit (11830-2). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Snap Shackle Lanyard - 2" - Pair Snap Shackle Lanyards: Makes grabbing snap shackle pins easier to grab. Hand-braided white nylon. Attach to split ring

Fluorescent Dye Marker - 2-Pack Powder that turns snow or water into a bright fluorescent green signal.  You can write in the snow or on the ground.  Serves as an excellent signal for rescuers to mark your location. Features: Environmentally Safe Waterproof Container 2-Pack WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM® Vertical Track Tie Down – 2 Pack As a pack of two, the RAM® Vertical Track Tie Down system features a T-Bolt and provides an anchor point for use with a track mounting system, allowing you to secure coolers and other accessories to your kayak. Each tie down is designed to work with 1” and 1.5” flat webbing, as well as ropes and bungee cords up to 3/8”. Compatible with all versions of the RAM Tough-Track™.  Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. 

Heavy Duty Lug 8GA Wire #10 Post *2-Pack Ancor Marine Grade lugs are manufactured from 100 percent heavy-duty annealed tinned copper, providing maximum current flow while resisting corrosion from salt and moisture. The seamless barrel design allows for maximum strength when crimped. Closed-end design seals out moisture so cables stay dry and corrosion free. Specifications: 100% Tinned Copper UL 486A

Replacement Garboard Drain Plug Only *2-Pack Provides bilge drainage when hauling out and the nut removed with a wrench or pliers.  Features: Machined tapered pipe threads ensure a watertight plug fit 3/8" neck depth Specifications: Construction: Brass *Sold as a package containing two drain plugs

Tinned Lug 6 AWG - 3/8" Stud Size - 2 Pack Lugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables. Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 6 AWG Stud Size (inch): 3/8" Length (inch): 1.406" Width (inch): 0.609" Clearance (inch): 0.406" Package Size: Two included

Tinned Lug 6 AWG - 1/4" Stud Size - 2 Pack Lugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables. Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 6 AWG Stud Size (inch): 1/4" Length (inch): 1.266" Width (inch): 0.438" Clearance (inch): 0.344" Package Size: Two included