Fluorescent Dye Marker - 2-Pack Powder that turns snow or water into a bright fluorescent green signal.  You can write in the snow or on the ground.  Serves as an excellent signal for rescuers to mark your location. Features: Environmentally Safe Waterproof Container 2-Pack WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Signaling Kit - Flag, Mirror, Dye Marker & Whistle Selection of visual and audible signals that can be seen or heard by sea or air rescues.  Pack in a polybag.   Includes: 1 USCG Approved Distress Flag Approved for daytime use only 3' x 3' with 4 ties Bright Orange with International distress sign printed in black Meets NY and OH requirements 1 Safety Whistle w/Lanyard Measured at 116 db at 1M Pealess design won't freeze High visibility orange plastic construction 1 Signaling mirror with lanyard Non corrosive material 1 1oz Highly Visible Green Fluorescent Dye Marker WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Safety Whistle with Lanyards - 2-Pack Bright Orange Whistle (2-Pack) with a hanging lanyard, durable, SOLAS and USCG approved for day or night signal, weather resistant, plastic construction delivers a loud, shrill signal (116 dB at 1M). The perfect device to attach to all of your PFDs.   Features: SOLAS Approved USCG Approved Weather Resistant Includes Hanging Lanyard Durable Color: Bright Orange

RAM® Vertical Track Tie Down – 2 Pack As a pack of two, the RAM® Vertical Track Tie Down system features a T-Bolt and provides an anchor point for use with a track mounting system, allowing you to secure coolers and other accessories to your kayak. Each tie down is designed to work with 1” and 1.5” flat webbing, as well as ropes and bungee cords up to 3/8”. Compatible with all versions of the RAM Tough-Track™.  Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. 

Heavy Duty Lug 8GA Wire #10 Post *2-Pack Ancor Marine Grade lugs are manufactured from 100 percent heavy-duty annealed tinned copper, providing maximum current flow while resisting corrosion from salt and moisture. The seamless barrel design allows for maximum strength when crimped. Closed-end design seals out moisture so cables stay dry and corrosion free. Specifications: 100% Tinned Copper UL 486A

Replacement Garboard Drain Plug Only *2-Pack Provides bilge drainage when hauling out and the nut removed with a wrench or pliers.  Features: Machined tapered pipe threads ensure a watertight plug fit 3/8" neck depth Specifications: Construction: Brass *Sold as a package containing two drain plugs

Tinned Lug 6 AWG - 3/8" Stud Size - 2 Pack Lugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables. Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 6 AWG Stud Size (inch): 3/8" Length (inch): 1.406" Width (inch): 0.609" Clearance (inch): 0.406" Package Size: Two included

Tinned Lug 6 AWG - 1/4" Stud Size - 2 Pack Lugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables. Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 6 AWG Stud Size (inch): 1/4" Length (inch): 1.266" Width (inch): 0.438" Clearance (inch): 0.344" Package Size: Two included

Marine network cable connector RJ45, 2-Pack WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Shur-LOK Swivel Pad & Scrubbers Fine Scrubber Pad (2 pack)

Shur-LOK Swivel Pad & Scrubbers Medium Scrubber Pad (2 pack)

Shur-LOK Swivel Pad & Scrubbers Coarse Scrubber Pad (2 pack)

Extension Post f/Cannon Rod Holder - 2-Pack Features: Extends height of rod holder by 6" Allows forward & backward pivot adjustment Alignment key allows for 360° pivot while holding post securely in place

Handle Drawer Pull 3-5/8" from center to center Surface Mount 2-Pack

Round Drawer Pull 1-3/8" Round Recess Mount, 3/8" Deep 2-Pack