Spacer Kit x 19mm OC15SUK16 f/90° Bezel Mounting Kit

90° Bezel Mounting Kit for Straight Shaft Drive 90° bezel mounting kit for straight shaft drive.

Type S - Standard Straight Shaft f/Mounting Behind the Dash The Straight shaft drive unit replaces the manual drive used on cable steered boats and is mounted directly behind the dash. The drive is directly compatible with the Morse 290 steering helm but comes with its own bezel kit and can be retrofitted in most installations using the cable and steering wheel from the manual steering helm on the boat. This drive can be mounted in 2 ways, either at 90° to the dashboard or at 20° to the dashboard. Spacer Kits are also available to reduce the space required behind the dashboard. Retro Fits to Most Cable Steered Vessel Easily Adaptable to S1 Autopilots The Only Viable Option When Adding an Autopilot to a Cable Steered Vessel Affordable, Reliable, Seamless-behind the Dash Installation 2 Year Limited Warranty

Spacer Kit for Type T System - 0.51" Features: 13mm (0.51") Spacer Kit Use with 90° bezel Specifically for Type T System

Steering Cable OC15109-9 8" Stroke x 9' f/use with Remote Drive Unit

Stainless Steel Rubbing Strakes - 203 x 19mm (7-7/8" x 3/4" By popular demand Barton Marine introduces a range of stainless steel rubbing strakes,to help prevent rope wear to deck edges and coamings.These attractive strakes are easy to fit and will last a lifetime.

UC94 Spacer Kit Spacer kit for UC94 Cylinder

UC128TS / UC128-SVS Spacer Kit Spacer kit for UC128TS / UC128-SVS Cylinder

Clevis Pin - 4.7mm (3/16") x 19mm (3/4") Grade 316 Stainless Steel

90 degree mounting bezel for T73NRFC Non-Reversible Steering System

Spacer kit for SeaStar Hydraulic steering systems.

RAM® X-Grip®Wheelchair Seat Track Mount for 9"-10" Tablets This kit includes a C size RAM® diamond ball base with a universal hardware pack that accommodates the seat track on most major wheelchair brands, including Invacare, Permobil, and Quickie. With the included short single socket arm, pipe extension, and double socket arm, connect the RAM® X-Grip® universal holder for 9”-10” tablets. The spring-loaded RAM® X-Grip® provides a perfect fit for your tablet and can be easily adjusted to the ideal position. Specifications: Cradle Dimensions: Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Maximum Length (using additional supports) = 10.25" Included Mounting Hardware: (QTY. 2) #10-32 x 1/2" Machine Screw (QTY. 2) #10-32 T-Nut (3/8" x 5/8") (QTY. 2) #10-32 T-Nut (1/2" x 1") (QTY. 2) M4 x 12mm Machine Screw (QTY. 2) M4 x 20mm Machine Screw (QTY. 2) M4 Stainless Steel Washer (QTY. 2) M4 Nylock Nut Material: Powder Coated Marine Grade Aluminum & High Strength Composite

PT3010 Base Wedge f/PowerTower® Radar Mounts - 4° Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway. Compatible with: Composite and Aluminum PowerTower® Features: Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge 4° Base Wedge for mounting under PowerTower® A tough, marine-grade, UV stable wedge  Compatible with radomes from most radar manufacturers Technical Specifications: Material - Marine grade Polymer Dimensions (L x W ) - 8" x 8" Angle - 4° In the Box: Wedge Base seal Instruction manual *Sold as an Individual 

WD-RAD-01 Top Plate f/PowerTower® Radar Mounts - 4° Enhance the performance of your radome with the rugged, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway. Mounts between PowerTower® mount and base of radar. Compatible with: Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - AS 21RD4KW, HB 2124 CHIRP radars Lowrance - HALO20, HALO20+, HALO24, LRA-1800 / RB714A / DX42, LRA-2400 HD radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars Sitex - MDS-12 radar Features: Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge 4° Base Wedge for mounting under PowerTower® A rugged, marine-grade, UV stable wedge  Compatible with radomes from most radar manufacturers Technical Specifications: Material - Marine Grade Polymer Dimensions (L x W ) - 11.10" x 9.09" Angle - 4° In the Box: Wedge Base seal Instruction manual *Sold as an Individual

Stainless Steel 90° Flush Mount Rod Holder  A value priced, vertical mount rod holder! This Economy 90° Flush Mount Rod Holder with Cap is constructed of formed 304 stainless steel with a plastic liner, mounting gasket, and integral cap. Features a 90° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included).