FCI1500 Thimble - Stainless Steel Using thimbles specifically designed for a flying sail furler prevents the wear of the mechanism jaw and pin and optimizes the transmission of rotation from the mechanism into the anti-torsion rope. Features: For FX+ 1500 furler For anti-torsion rope  Optimum transmission of rotation Mirror polished stainless steel Specifications: Rope Diameter: 9-11mm

FCI2500 Thimble - Stainless Steel Using thimbles specifically designed for a flying sail furler prevents the wear of the mechanism jaw and pin and optimizes the transmission of rotation from the mechanism into the anti-torsion rope. Features: For FX+ 2500 furler For anti-torsion rope  Optimum transmission of rotation Mirror polished stainless steel Specifications: Rope Diameter: 11-13mm

FCI4500 Thimble - Stainless Steel Using thimbles specifically designed for a flying sail furler prevents the wear of the mechanism jaw and pin and optimizes the transmission of rotation from the mechanism into the anti-torsion rope. Features: For FX+ 4500 furler For anti-torsion rope  Optimum transmission of rotation Mirror polished stainless steel Specifications: Rope Diameter: 13-15

SPT1001 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18 and 24, GMR18HD, 18xHD, 18HD+, GMR24HD and 24xHD, GMR40 radars Humminbird - HB2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Nobletec - 4KW radars Raymarine - QUANTUM (Q24C) and QUANTUM 2 (Q24D0, RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, 60, 64-S, GB40/NX40/45/NSE1/12 radars Sitex - RADARpc-4D Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual

SPT1002 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS 2D, 42DL, 42DL+, 4D, 4D-NXT, DRS4W, NavNet 18" and 24" Humminbird - AS 21RD4KW Inerphase - Mini RE-1, 8, 9 JRC 100, 100mk2, 1066, 1500, 1500mk2, 1800, 2000 Koden - 2kW 12" Lowrance - LRA-1800/RB714A/DX42 Navman - 8000 Series - 18" Seiwa - SWR-1, SWR-8, SWR-9 Simrad - GB40, NX4-/45, NSE8/12, RB712A, DX42S Sitex - MDS-1, 8, 9, 12, NKE-1066 Techmarine - T72.01, T72.02, T-72.04 Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual

1157 Stainless Steel Thimble Kit Includes: 2 stainless steel thimbles 4 heavy-duty brass connector sleeves 4 brass connector sleeves

Sailmaker Stainless Steel Thimble - 3mm(1/8") Cable Diameter Used to create eyes in both rope and wire rope

Sailmaker Stainless Steel Thimble - 4mm(5/32") Cable Diameter Used to create eyes in both rope and wire rope

Sailmaker Stainless Steel Thimble - 5mm(3/16") Cable Diameter Used to create eyes in both rope and wire rope

Sailmaker Stainless Steel Thimble - 6mm(1/4") Cable Diameter Used to create eyes in both rope and wire rope

Sailmaker Stainless Steel Thimble - 8mm(5/16") Cable Diameter Used to create eyes in both rope and wire rope

Rod Holder - Medium - 0° - Stainless Steel The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.

Rod Holder - Heavy Duty - 0° - Stainless Steel The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.

Flush Mount Rod Holder RH-525SS Medium 30° Stainless Steel The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Flush Mount Rod Holder RH-527VS Medium 0° Stainless Steel The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.