2-Way DMX Junction Box The 2-Way DMX Junction Box has been specifically developed to work in combination with OceanLED Sport Colors DMX lights and Explore E3 Colors DMX lights. Its primary role is to allow for the distribution of power and DMX signals within the vessel’s underwater lighting system. Using the 2-Way DMX Junction box, a Sport Colors DMX or Explore E3 Colors DMX system can be expanded to include up to 32 lights. The IP66-rated 2-Way Junction Box unit is made from robust polycarbonate materials and should be mounted in a protected area within the vessel. Features: Allow for the distribution of power and DMX signals within the vessel’s underwater lighting system

X-Series DMX Junction Box For use in-conjunction with OceanLED Colours APP and DMX controller. Allows for up to 4 DMX connections to OceanLED Xtreme Series DMX Colours Lights per Junction Box. Can be linked to further DMX junction boxes to connect a series of LED Lights. Features: 12/24v DC IP66 4x Fused Power/DMX outputs (4A max power output) Built-in DMX terminator DMX input/output to allow multiple expansion To be used in conjunction with OceanLED Xtreme Series DMX Colours Robust Polycarbonate Design See-through lid to view connections Semi-transparent LID Specifications: Warranty: 2 years

4MP H.265 AI Bullet IP IR Camera - 2.8mm Lens & Junction Box Features: Supports up to 4MP @ 30fps Built-in standard PoE (IEEE 802.3af) H.265/H.264/MJPEG compression supported True Day/Night operation (IR cut filter) Adaptive IR LEDs reduce IR saturation IR range: Up to 100 FT (depending on scene reflection) Micro SD slot up to 256GB (card not included) True WDR (wide dynamic range) operation IP67 compliant, weather resistant Junction box included (works with NPT/BSP specifications) Conformant with ONVIF Profile G/S/T 5-year warranty UL-listed NDAA Compliant Technical Specifications: Power - DC Jack Maximum Resolution - 2592 x 1520  Field of View - 95.3°(H) , 53.2°(V), 115°(D)  White Balance - Auto, Indoor, Outdoor, Manual  Operating Temperature - -40°F 140°F  Unit Dimensions - 2.9” (W) x 2.9” (H) x 6.6” (D)  Unit Weight - 1 lb.

Standard 4-Way Junction Box The OceanLED Standard Junction Box is a robust interconnect module that houses and protects electrical connections. This multi-outlet unit allows up to 4 underwater lights to be connected and is vDC powered. The box provides the transition from conduit to multi-cable via easy cable gland connector. Features: 12/24v DC IP66 4x Fused DMX outputs (10a max per output) Robust Polycarbonate Design Semi-transparent LID

OceanDMX RC Pro Series Colors 915MHz The OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc. Features: User-friendly interface, easy and simple operation Control up to 4 zones Control of third-party DMX devices 3 programmable scenes Can be controlled by a maximum of 8 different remotes Pre-set 10 changing modes, with pause function (Colors only) Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors. Box Contents: Remote control Waterproof pouch DMX Receiver Control Cable Terminator (Not included for X-Series) DMX Junction Box (X-Series Only) Installation Manual

OceanDMX RC Explore XFM Colors 915MHz The OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc. Features: User-friendly interface, easy and simple operation Control up to 4 zones Control of third-party DMX devices 3 programmable scenes Can be controlled by a maximum of 8 different remotes Pre-set 10 changing modes, with pause function (Colors only) Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors. Box Contents: Remote control Waterproof pouch DMX Receiver Control Cable Terminator (Not included for X-Series) DMX Junction Box (X-Series Only) Installation Manual

OceanDMX RC X-Series Colors 915MHz The OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc. Features: User-friendly interface, easy and simple operation Control up to 4 zones Control of third-party DMX devices 3 programmable scenes Can be controlled by a maximum of 8 different remotes Pre-set 10 changing modes, with pause function (Colors only) Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors. Box Contents: Remote control Waterproof pouch DMX Receiver Control Cable Terminator (Not included for X-Series) DMX Junction Box (X-Series Only) Installation Manual

OceanDMX RC Explore XFM Dual 915MHz The OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc. Features: User-friendly interface, easy and simple operation Control up to 4 zones Control of third-party DMX devices 3 programmable scenes Can be controlled by a maximum of 8 different remotes Pre-set 10 changing modes, with pause function (Colours only) Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors. Box Contents: Remote control Waterproof pouch DMX Receiver Control Cable Terminator (Not included for X-Series) DMX Junction Box (X-Series Only) Installation Manual

OceanConnect Junction Box The OceanConnect is a waterproof (IP66) DMX-controlled, low-voltage DC (9–32V) junction box. The OceanConnect provides one power unit and four individually switched fused power outputs (6 amps per output) to connect DC-powered lights or other DC-switched units. The unit also supports powering and individual addressing of up to four DMX-controlled OceanLED X-Series lights.  Contents: 1x OceanConnect unit, including 4x 7.5A blade fuses 4x mounting screws 1x twin entry cable grommet 4x blanking plugs Specifications: Voltage: 12/24V DC (max 32V DC) Input/Output Cable Glands: 1x M20-Power In, 4x M16 - DMX In/Out, and Lights Out Power Input Terminals Wire Gauge: 8-20 AWG DMX In/Out, and Lights Out Terminals Wire Gauge: 12-28 AWG Light Outputs: DMX & Power- 4 x individual fused 6 Amp each max DMX Input: 1x DMX Input (to connect the DMX controller) DMX Output: 1x DMX Output (to link junction boxes in the chain) DMX Terminator: Onboard DMX terminator with an on/off switch Physical Specifications Dimensions (Including Cable Glands): 228mm x 174mm x 60mm (9" x 6.8" x 2.3") Enclosure: IP66-robust polycarbonate Weight: 270g

DMX Control Output Cable - 3M - OceanBridge to OceanConnect or 2-Way The OceanLED DMX Control Output Cable is used to link the OceanBridge Multizone Lighting Controller to an OceanConnect Junction Box or 2-Way Junction Box. The cable is required for any OceanBridge system where junction boxes are in use. Specifications: Cable Length: 3 meters

DMX Control Output Cable - 5M - OceanBridge to OceanConnect or 2-Way Cable The OceanLED DMX Control Output Cable is used to link the OceanBridge Multizone Lighting Controller to an OceanConnect Junction Box or 2-Way Junction Box. The cable is required for any OceanBridge system where junction boxes are in use. Specifications: Length: 5 meters

DMX Control Output Cable - 10M - OceanBridge to OceanConnect or 2-Way Cable The OceanLED DMX Control Output Cable is used to link the OceanBridge Multizone Lighting Controller to an OceanConnect Junction Box or 2-Way Junction Box. The cable is required for any OceanBridge system where junction boxes are in use. Specifications: Length: 10 meters

DMX Control Output Cable - 15M - OceanBridge to OceanConnect or 2-Way Cable The OceanLED DMX Control Output Cable is used to link the OceanBridge Multizone Lighting Controller to an OceanConnect Junction Box or 2-Way Junction Box. The cable is required for any OceanBridge system where junction boxes are in use. Specifications: Length: 15 meters

DMX Control Output Cable - 20M - OceanBridge to OceanConnect or 2-Way Cable The OceanLED DMX Control Output Cable is used to link the OceanBridge Multizone Lighting Controller to an OceanConnect Junction Box or 2-Way Junction Box. The cable is required for any OceanBridge system where junction boxes are in use. Specifications: Length: 20 meters

2MP Ultra Intensifier® HD-TVI Dome Camera 3.6mm Lens - Dark Grey Housing with Included Junction Box Features: Next generation of Intensifier® technology provides an even more vivid color image in low light situations Preset image modes offer convenient settings for different environments Supports up to full HD 1080p resolution @ 30fps True WDR (wide dynamic range) operation Glacier: Operates in -40º F IP66 compliant, weather resistant IK10 compliant, vandal resistant TAA Compliant Junction box included for convenience 5 year warranty