|
Drip Ring Kit
Drip rings help stop the water from flowing down the shaft of the paddle into the boat or lap of the paddler while paddling. Stay dry and paddle on with YakGear Drip Rings. Accommodating two-piece paddles with a shaft circumference of 1-1/4 inch to 1-1/2 inch, the drip rings are placed close to the paddle blades on the shaft of the paddle. Drip ring combinations are sold in quantities of two for placement on the port and starboard sides of one paddle. The paddle must be two pieces for proper installation. Paddle not included.
Features:
Sold in quantities of two
Drip rings stop water from flowing down the shaft of the paddle
Fits paddles ranging from 1-1/4 to 1-1/2 in. in circumference
1-year warranty
|
4.00 |
|
|
Hypro 9910-Kit-1913, O'Ring Kit
|
51.11 |
|
|
Hypro 9910-Kit-1916, O'Ring Kit
9910-KIT1916 Includes:
Qty 4 9910-620030 O-Ring
Qty 1 9910-620210 O-Ring
Qty 2 9910-180101 O-Ring
Qty 1 9910-550040 O-Ring
Qty 2 9910-550350 O-Ring
Qty 4 9910-390060 O-Ring
Qty 1 9910-650542 O-Ring
Qty 1 9910-390290 O-Ring
Qty 1 9910-740290 O-Ring
|
52.20 |
|
|
Hypro 9910-Kit-1919, D50 O-Ring Kit
9910-KIT1919 Includes:
Qty 1 9910-650920 O-Ring
Qty 2 9910-180101 O-Ring
Qty 5 9910-550040 O-Ring
Qty 4 9910-320030 O-Ring
Qty 1 9910-650542 O-Ring
Qty 1 9910-390290 O-Ring
Qty 1 9910-740290 O-Ring
Qty 1 9910-550350 O-Ring
Image may not represent exact kit contents
|
44.78 |
|
|
Cat Pump 32773 O'Ring Kit
The CAT Pumps 32773 is a kit of replacement O-rings for the components inside unloaders. These rings are used to swap out worn or leaking unloader O-rings. Made with NBR. Kit contains OEM components.
Specifications:
OEM Manufacturer: CAT Pumps
Item: O-Ring Kit
Material: NBR
Compatible Unloaders: 7590
Includes:
Piston Stem Backup Ring
Piston Stem O-Ring
Upper Body O-Ring
Piston O-Ring
Piston Backup Ring
Piston Retainer O-Ring
Seat O-Ring (95D)
Check Valve O-Ring
Discharge Fitting O-Ring
|
35.98 |
|
|
Anchor Cleat Kit
The YakGear Anchor Cleat Kit comes with a 4-inch nylon anchor cleat for kayaks, canoes, and small boats. This anchor cleat provides a stable access point to secure anchors, drift chutes, bow lines, and safety lines.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Installation instructions and hardware are included
1-year warranty
Specifications:
Length: 4 inches
|
5.60 |
|
|
Paddle Keeper Kit
Add or replace paddle holders with the YakGear Paddle Keeper Kit. While there are many ways to mount and store paddles on kayaks and canoes, bungee paddle keepers are by far the most versatile. A 1/4-inch bungee is mounted with terminal ends and a J-hook to form a pressure-based bungee clamp for paddles, fishing poles, and anchor sticks. This kit comes with two paddle keepers, so the versatility and practicality of the product will not be limited to one side of the kayak or canoe.
As always, this complete kit comes with all stainless-steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Paddle keepers can be used to store an assortment of items
Made of 1/4-in. nylon bungee, it attaches to a vessel using terminal ends and sleeves
Each kit comes with two paddle keepers
Installation instructions and hardware are included
1-year warranty
|
12.80 |
|
|
El Outboard Steering Kit for Up To 150HP Motors
401 Manual Helm with Fitting Kit
The heart of the Admiral Series is the HyDrive M402 helm unit. The 7-piston pumps are precision manufactured to standards and tolerances that are second to none. In-built lock valves, which eliminate torque feedback are standard. The light, smooth steering must be experienced to be appreciated. Designed as a complete Do It Yourself installation, everything you need is supplied including detailed instructions. You don’t even have to know anything about hydraulics!
The Admiral Series 401 helm units offer improved internal efficiencies and unique assembly design, consolidating HyDrive Engineering‘s position as a world leader in hydraulic boat steering. Two years of design development and testing have resulted in these helms being selected as the standard helm supplied in all HyDrive steering kits.
Features:
Front-mount design for maximum appeal
Improved internal efficiency
Brass wheel nut and washer
Stainless steel steering wheel shaft - not aluminum
Anti-splash filler cap for rough conditions
Unique assembly design for ease of service and maximum performance
Stainless steel studs, nuts, and washer pre-fitted for convenience
Highly efficient non-return valves for non-feedback of helm unit - eliminates all torque from the steering cylinder
Ultra 15 Oil Quantity 2 - 1 Liter Bottles
Features:
For use in HyDrive Skipper and Admiral Series Hydraulic steering systems only
Not for use in HyDrive 2000 Series Steering Systems
This oil is compatible with HyDrive HF15, but should not be mixed with any other fluids
N-8 - 49' Nylon Tube 3/8"
Features:
Semi-Rigid Nylon Tube at 3/8 Inch OD (49' Coil, You Cut to length to suit)
Use with HP Compression Olive and Nut Fittings
Supplied in HY EL O/B KIT
Stainless Steel Tube & Rod for Up To 150HP Up To 150HP Outboard
Specifications:
Cylinder Tube = Stainless Steel
Cylinder Tube Dia. = 1.33 Inches
Cylinder Rod = Stainless Steel
Cylinder Brackets = Stainless Steel
Cylinder 1 " Nylok Nuts = Stainless Steel
Cylinder End Caps = Cast Aluminum
Cylinder Rod Stroke = 7-1/2 Inches
Cylinder Type = Un Balanced Cylinder
Cylinder Volume Big Side Vol = 155 ccSmall side Vol = 115 cc
Steering Wheel HO/HO = 5.5 and 4.1 Turns
Total length Rod Compressed = 15.75 Inches
Rod Extended = 23.00 Inches
Cylinder Total Weight = 3.15 Pounds (1427 Grams)
|
1399.44 |
|
|
V10-2041 4 Gauge Amp Wiring Kit - 20' (6.1 M)
A marine amplifier has to stand up to the rigors of life on the water, and so does the wiring kit you use with it. The T-Spec V10-2041 Amp Kit is ideal for most single marine amps with a power rating of up to 1000 watts and will give you reliable power for seasons to come.
Features:
Complete marine amplifier wiring kit
Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more
Marine-compliant cable
In the Box:
4 AWG pearl White OFC copper wire - 20'
4 AWG matte Grey OFC copper wire - 20'
18 AWG Blue wire - 20'
(1) 100 amp circuit breaker
(1) 1/0 AWG ring terminal with White boot
(1) 1/0 AWG ring terminal with Silver boot
(10) 6" Wire ties
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
156.66 |
|
|
V10-1041 4 Gauge Amp Wiring Kit - 10' (3.05 M)
A marine amplifier has to stand up to the rigors of life on the water, and so does the wiring kit you use with it. The T-Spec V10-1041 Amp Kit is ideal for most single marine amps with a power rating of up to 1000 watts and will give you reliable power for seasons to come.
Features:
Complete marine amplifier wiring kit
Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more
Marine-compliant cable
In the Box:
4 AWG pearl White OFC copper wire - 10'
4 AWG matte Grey OFC copper wire - 10'
18 AWG Blue wire - 20'
(1) 100 amp circuit breaker
(1) 1/0 AWG ring terminal with White boot
(1) 1/0 AWG ring terminal with Silver boot
(10) 6" Wire ties
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
99.59 |
|
|
Pro-Series Bearings Kit - 2nd Generation
Bearing kit for Generation 2 Pro-Series and Pro-Fish series windlasses.
Compatible With:
Lewmar Pro-Series and Pro-Fish windlasses - Generation 2
In the Box:
Roller clutch x one (1)
External circlip x one (1)
Roller bearings (varied sizes) x five (5)
*Sold as an Individual
|
60.71 |
|
|
Marine Amp Wiring Kit
In order to deliver the highest quality in sound and performance, Roswell has developed its own wiring accessories to join all of your Roswell Marine audio products together. Everything you need to install and connect two amplifiers (except the amplifiers themselves) is included in this package.
Includes:
(1) power fused distribution block: (1) 1/0 AWG/4 AWG in, (2) 4 AWG/8 AWG out
15 ft. 4GA. satin charcoal ground wire – 105°C rated, tinned OFC full-spec copper
(1) power ground distribution block: (1) 1/0 AWG/4 AWG in, (2) 4 AWG/8 AWG out
15 ft. 4GA. satin blue power wire – 105°C rated, tinned OFC full-spec copper
(1) inline fuse holder - 1/0 AWG in/out with 4 AWG reducers
10 ft. 18GA. frosted blue remote wire – tinned OFC full-spec copper
(1) 100 Amp mini ANL fuse
(2) 2-meter smoked jacket, quad shielded RCA cables
(2) 60 Amp mini ANL fuses
(2) RCA Y-Adapter (1F to 2M)
(1) 50 amp mini ANL fuse
(2) RCA Y-Adapter (1M to 2F)
(1) 80 amp ANL fuse
(12) 4" black cable ties
(1) 100 amp ANL fuse
(6) stainless steel 3.9 x 16mm screws
(1) 150 amp ANL fuse
(2) M8 washers (ID: 8.4mm, OD: 16mm)
(1) 4GA. brass terminal ring with black boot & M10 bolt
(1) 4GA. brass terminal ring with red boot & M10 bolt
*Does not include amplifier-to-speaker wiring
|
180.00 |
|
|
3/4" Wheel Bearing Kit
It may not be an immediate thought, but a trailer's wheels need to be cared for just like the wheels of a vehicle. This wheel bearing kit includes two bearing cones, two bearing cups, a grease seal, and a cotter pin. The bearings are designed to automatically maintain the correct internal pressure and not damage the seals. This kit fits a 3/4" diameter.
Features:
Features a 3/4 in. inside diameter
Automatically maintains the correct internal pressure to avoid seal damage
Includes:
Two bearing cones, two bearing cups, a grease seal, and a cotter pin
Specifications:
Finish: Brushed Stainless
Hub Warehouse: D25
Warranty: Limited lifetime warranty (one-year finish, one-year parts)
|
21.00 |
|
|
1-1/16" Wheel Bearing Kit
It may not be an immediate thought, but a trailer's wheels need to be cared for just like the wheels of a vehicle. This wheel bearing kit includes two bearing cones, two bearing cups, a grease seal, and a cotter pin. The bearings are designed to automatically maintain the correct internal pressure and not damage the seals. This kit fits a 1-1/16" diameter.
Features:
Features a 1-1/16 in. inside diameter
Automatically maintains the correct internal pressure to avoid seal damage
Includes:
Two bearing cones, two bearing cups, a grease seal, and a cotter pin
Specifications:
Finish: Brushed Stainless
Hub Warehouse: D25
Warranty: Limited lifetime warranty (one-year finish, one-year parts)
|
21.48 |
|
|
1" Wheel Bearing Kit
It may not be on the forefront of most drivers minds, but a trailer's wheels need to be cared for just like the wheels of a vehicle. This wheel bearing kit includes two bearing cones, two bearing cups, a grease seal, and a cotter pin. The bearings are designed to automatically maintain the correct internal pressure and not damage the seals. This kit fits a 1" diameter.
Features:
Features a 1" inside diameter
Automatically maintains the correct internal pressure to avoid seal damage
Specifications:
Finish: Brushed Stainless
Hub Warehouse: D25
Warranty: Limited lifetime warranty (one-year finish, one-year parts)
|
21.00 |
|