8" Long PVC Pipe This RAM PVC pipe is 8 inches long and is compatible with RAM's PVC Pipe Sockets (C Size and B Size). Specifications: Length: 8 in. Materials: High-strength composite Weight: 0.16 lb

RAM 8" Long Top Male Tele-Pole The RAM upper Tele-Pole, 8" male pole, contains a swing arm connection point that will attach directly to any double swing arm system with 1.5" Socket. The male post is 8" long and has a diameter of 1.328". Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag.

PVC Pipe Socket with Composite Octagon Button This RAM PVC pipe has an octagon button for use with RAM® octagon products. Features: Easily connect to RAM® octagon products to create an extension for your mounting system Made of high-strength composites for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Materials: High-strength composite Weight: 0.07 lb.

RAM® 14" PVC Pipe with Single Socket Arms Specifications: Product Dimensions: Overall Length 14" Ball/Socket Size: B Size (1") Materials: High strength composite

PedestalPod with RAM Mount Pre-Cut for Lowrance HDS-9 Gen2 Touch, HDS-9 Gen3 & HDS Carbon 9 - Carbon Black PedestalPod with RAM Mounts is specifically designed for mounting the fishfinder near the bow on Bass Boats. Built on the foundation of NavPods popular range of waterproof housings for marine electronics, PedestalPods position your fishfinder/chartplotter at an easy to reach 20” off the deck. This allows the user easy access to the display for changes to range, zoom or even control the trolling motor. There is a big difference between reaching down to a height off the deck of 20” to control your fishfinder compared to reaching all the way down to the deck when it was only bracket mounted.  PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal. This offers protection of your fishfinder/chartplotter from the harshest of wet boating conditions.  This protection assures reliability and longevity of your marine electronics. PedestalPod with RAM Mounts utilizes the proven RAM Mounting system with the large 2.25” rubber “D” size ball and the RAM pin-lock security solution.  RAM Mounts are designed with a patented rubber ball and socket system that allows an almost infinite amount of ways to position the angle of the fishfinder for that precise position of viewing. When you might be trailering, or storing the boat, the display can fold flat onto the deck with only 10” of clearance.  This will allow most boat covers to fit over the PedestalPod when not in use. Your fishfinder is easily flush mounted into the pre-cut face of the NavPod. There are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. PedestalPods are waterproof housings for marine electronics specifically designed for bass boats. PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your marine electronics from the harshest of wet boating conditions. PedestalPods provide the convenience of height for accessibility and added security with protection from theft. PedestalPods position your fishfinder/chartplotter at 20” off the deck and located near the bow and at a 45-degree angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. They keep harsh spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PedestalPod. The heavy duty, black powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look. It provides protection for wires and connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets. All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PedestalPods are available pre-cut for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. Constructed out of durable ABS like all Gen3 NavPods, black carbon PedestalPods have the same high gloss finish with UV stability. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods. PedestalPods – Protection, Convenience, Security

This RAM high strength composite cradle is designed to hold the following devices: Garmin StreetPilot c530 Garmin StreetPilot c550 Garmin StreetPilot c580 Garmin StreetPilot i2 Garmin StreetPilot i3 Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system. Notice: THIS MOUNT IS NOT INTENDED FOR HIGH VIBRATION APPLICATIONS SUCH AS MOTORCYCLE OR OFF ROAD USE. FOR HEAVY DUTY APPLICATIONS APPLY PVC PLUMBING GLUE TO RAM-HOL-GA22 ADAPTOR PRIOR TO ASSEMBLY. NOTE: ONCE GLUED THE MOUNT WILL BE PERMANENT.

RAM® Rail Clamp Ball Base for 1.25" - 1.875" Rails The RAM-D-271U-12, round pipe base, consists of a 2.25" rubber ball connected that will connect to a pipe tubing diameter from 1.25" to 1.875" in diameter.  Specifications: Hardware Included: (2) 1/4"-20 x 1.5" Screws, (2) 1/4"-20 Nylock Nuts, (2) Rubber Caps  Clamp Range: 1.25" - 1.875" diameter Ball/Socket Size: D Size (2.25") Weight Capacity: 6 lbs Materials: Marine-Grade Aluminum

RAM® Rail Clamp Ball Base for 2" - 2.5" Rails The RAM-D-271U-2, round pipe base, consists of a 2.25" rubber ball connected that will connect to a pipe tubing diameter from 2" to 2.5" in diameter.  Specifications: Hardware Included: (4) 1/4"-20 x 1.5" Screws, (4) 1/4"-20 Nylock Nuts, (4) Rubber Caps  Clamp Range: 2" - 2.5" diameter Ball/Socket Size: D Size (2.25") Weight Capacity: 6 lbs Materials: Marine-Grade Aluminum

RAM POD III 1/2" Pipe Post Ball Size: 1.5 inch Rubber Ball Color: Black Powder Coat Material: Powder Coated Marine Grade Aluminum

Ram Pin-Lock™ Security Kit f/ 1" B Size Mounts and Gimbal Brackets You make a significant investment in the equipment you purchase to make your job or hobby easier or more enjoyable. Whether it's a high end piece of marine electronics, a GPS for your motorcycle, or a tablet used for business purposes, you need to protect your investment. RAM® Mounts protect your device from harmful shock and vibration, but what about theft and tampering? RAM® offers a full suite of security products which protect your device while mounted on your RAM® mount from theft and unwanted tampering. Simply add a security knob or nut to your RAM Mount to deter would-be thieves from targeting your equipment. RAM® security solutions are also a great way to add tamper resistance to your RAM® Mount in situations where there is a desire to prevent end-users from adjusting the mount or removing the device. High strength composite and brass construction assures a long life of trouble free use in a wide variety of environments including marine and salt water.

PedestalPod with RAM Mount Pre-Cut for Lowrance HDS-9 MFD Gen2 Touch & HDS-9 Gen3 - Carbon Black PedestalPod with RAM Mounts is specifically designed for mounting the fishfinder near the bow on Bass Boats.  Built on the foundation of NavPods popular range of waterproof housings for marine electronics, PedestalPods position your fishfinder/chartplotter at an easy-to-reach 20” off the deck. This allows the user easy access to the display for changes to range, zoom or even control the trolling motor. There is a big difference between reaching down to a height off the deck of 20” to control your fishfinder compared to reaching all the way down to the deck when it was only bracket mounted. PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal. This offers protection of your fishfinder/chartplotter from the harshest of wet boating conditions.  This protection assures the reliability and longevity of your marine electronics. The PedestalPod with RAM Mounts utilizes the proven RAM Mounting system with the large 2.25” rubber “D” size ball and the RAM pin-lock security solution. RAM Mounts are designed with a patented rubber ball and socket system that allows an almost infinite amount of ways to position the angle of the fishfinder for that precise position of viewing. When you might be trailering, or storing the boat, the display can fold flat onto the deck with only 10” of clearance.  This will allow most boat covers to fit over the PedestalPod when not in use. Your fishfinder is easily flush mounted into the pre-cut face of the NavPod. There are pre-cut models available for 7”, 9”, and 12” LCD displays from all major marine electronic manufacturers. PedestalPods – Protection, Convenience, Security.

RAM Yoke Clamp Mount w/Diamond Base - Long Part #: RAM-B-121-C-238U Universal glare shield/yoke mount with LONG double socket arm and universal diamond base adapter, is ideally suited for a day on the wing and yet easily removed for travel in the flight bag. Both strong and light weight, this new clamping base is perfect for numerous electronic devices commonly found in the cockpit. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, or add a second ball to mount another device. Crafted to hold firm to most glare shields, yokes, or tubing, practically any aircraft can benefit from this product. Simple to use and exceptionally versatile, RAM has created another "must have" for any pilot. The RAM-B-121-C-238U fits rails or edge lips from 0.625" to a maximum of 1.25". The mounting base can also accept a second ball giving you the ultimate double ball base. Clamp Dimensions: Fits rails or edge lips from 0.625" to a maximum of 1.25" Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. The rail does not need to be perfectly round to mount this base.

RAM Twist Lock Suction Cup Mount with Long Double Socket Arm and Diamond Adapter The RAM-B-166U-C consists of a 3.25" suction cup locking base, LONG double socket arm and diamond base end. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.

RAM 1" Diameter Ball Flat Surface Mount with Long Double Socket Arm, 2.5" Round Base & Diamond Base The RAM-B-138U-C consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, LONG double socket arm and diamond base adapter. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device. Overall Height: 6.59" Material: Powder Coated Marine Grade Aluminum Ball Size 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Flat Surface Mount® with Long Double Socket Arm & Universal X-Grip® III Holder For Large Tablets The RAM-B-101-C-UN9U consists of (2 QTY) 2.5" diameter round bases with the universal AMPS hole pattern, LONG double socket arm and universal X-Grip® III clamping cradle for 10" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip® III clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® III clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip® III. X-Grip® III Cradle Dimensions: Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Maximum Length (using additional supports) = 10.25" X-Grip® III Cradle Features: 1. Spring loaded cradle expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of cradle allows for attachment to many 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the cradle for quick release of your tablet 6. Multiple mounting access points on the back of the cradle 7. Additional support keeper at the bottom of the cradle 8. Full access to all ports 9. Lifetime warranty Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite