|
Outdoor Antenna for GX LTE 4G-A
This antenna is optimized for 4G frequency bands and, as such, will have slightly better reception on the 4G network. It can be used with the GX LTE 4G for 2G, 3G, and 4G bands.
If the 2G/3G variant does not provide sufficient signal quality in an installation, the solution is to contact a local GSM antenna provider. All the necessary information, including a link to the cellular modem (Simcom) used, can be found in this manual.
Specifications:
Mounting Option: Screw mount
Cable Type: RG-316
Cable Length: 3.0 m
Connector: SMA male straight
Frequencies: 800/900/1800/1900/2100 MHz
Signal Gain: 3 dBi
Please contact your dealer for any returns, repairs or support issues related to this product.
|
35.70 |
|
|
GX LTE 4G-A Cellular Modem for GX Devices - North America Only
The GX LTE 4G is an accessory for GX devices. It is a cellular modem that supports 2G, 3G, and 4G technologies. It provides mobile internet for the system and a connection to the Victron Remote Management (VRM) portal.
Built-in GPS Receiver
The GX LTE 4G includes a built-in GPS receiver. When the optional active GPS antenna is installed, the system can be tracked as well as geo-fenced on the VRM Portal.
The required accessory part number is GSM900200100 - Active GPS Antenna for GX GSM.
GX Compatibility
The GX LTE 4G can be used with any of the GX devices and requires Venus OS v2.60 or newer to be installed on the GX device.
SIM Card
It requires a SIM card in the Mini-SIM format.
When to Use a Mobile Router Instead
The GX LTE 4G provides an internet connection for the GX device only. There is no option to share the internet with laptops, phones, or other devices. For installations where more devices need internet, such as a yacht or RV, consider installing a mobile router instead.
Antennas and Accessories
A small indoor LTE antenna is included. Optionally, Victron sells an outdoor LTE antenna, which increases the range.
Part number GSM900100400 - Outdoor 4G GSM Antenna.
Specifications:
Region: For North America
Used Module: SIMCom, SIM7600A
Supported LTE Bands: 2, 4, 12
Supply Voltage Range: 8 - 70VDC
Power Draw: 2.5W while 2G/3G/4G data transfer / <1.0W in idle mode / +0.4W if GPS is enabled
Operating Temperature Range: -40 +50°C (-40 - 120°F)
Power Cable (Included): 1.4m cable with inline fuse holder, terminal block, and 10mm ring terminals
Inline Fuse (included): T3.15A250V
Communication Specifications:
USB Communication Port: Fixed 1.0m cable with USB-A connector (connects to the GX device)
LTE Antenna Connector: Type SMA Female (optional 4G outdoor antenna GSM900100400)
GPS Antenna Connector: Type SMA Female (optional GPS antenna GSM900200100)
GNSS: GPS/Beidou/GLONASS/GALILEO/QZSS
SIM Card: Regular Mini SIM (supports both 1.8V and 3V)
Data Transmission (max. Download/Upload) LTE Cat-1: 10 Mbps / 5 Mbps
Data Transmission (max. Download/Upload) 3G (HSPA+): 42 Mbps / 5.76 Mbps
Data Transmission (max. Download/Upload) 2G (EDGE): 236.8 Kbps / 236.8 Kbps
Data Transmission (max. Download/Upload) 2G (GPRS): 85.6 Kbps / 85.6 Kbps
Status Indicator: Blue LED
Installation & Dimensions:
Dimensions (l x w x h): 106 × 42.5 × 22mm
Weight: 0.08kg (0.177lbs)
Wire Gauge (power cable): 0.5..1.5mm2 / AWG 28..16 or use supplied power cable
Recommended Fuse Size: 500mA @ 12V / 250mA @ 24V / 100mA @ 48V or use supplied inline fuse
In the Box:
GX LTE 4G (with integrated USB cable)
GSM 2G/3G/4G mini-rod antenna (for indoor use)
DC power cable (with inline fuse and terminal block)
Standrads:
Safety: EN 60335-1 / EN 60335-2-29 / EN 62368-1
Emission / Immunity: ECE R10-5
QM: EN 9001:2015
Please contact your dealer for any returns, repairs or support issues related to this product.
|
252.96 |
|
|
Active GPS Antenna for GX LTE Modem
This antenna is for the GX LTE Modem.
Specifications:
Mounting Option: Magnet
Cable Type: RG-74
Cable Length: 3.0 m
Connector: SMA male straight
Frequencies: 1575.42 MHz
Signal Gain: 50 Ω
Please contact your dealer for any returns, repairs or support issues related to this product.
|
35.70 |
|
|
Standard Antenna
Soft, flexible replacement antenna f/M92D
|
20.52 |
|
|
Standard Antenna
Standard Replacement Antenna f/GM1600
|
15.40 |
|
|
Standard Antenna f/M88 & F50
150-174MHz
Red Ring
|
13.68 |
|
|
Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow.
Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available.
All-new sleek, modern design.
First all modular system - extremely versatile.
Easy to select and install for any radar, dome, light or camera combination.
Easy to add accessories.
Upgradable for future additions and modifications.
Powder coated aluminum construction
Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer.
The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."
See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )
Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.
SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686
|
|
|
4G/5G LTE Omni-Directional MIMO Antenna - White
Overall data throughput is increased by using Multiple Input Multiple Output (MIMO) devices. Digital Antenna's 1742-MIMO antenna encompasses two separate antennas in one radome allowing devices requiring multiple RF connections to use fewer antennas.
Designed with vertical polarization, the Digital Antenna 1742-MIMO antenna provides the strongest 4G/5G/LTE signals for enhanced data speeds in poor cellular and WiFi signal areas.
Unsurpassed performance from 4-9dBi gain omnidirectional, dual vertical-polarized antennas covering 695-3000 MHz enclosed in a rugged UV stable, marine grade fiberglass housing with corrosion-resistant stainless steel hardware.
Features:
Vertically polarized, dual-integrated antennas
9dBi peak gain
Enhanced data speeds
Rugged UV stable polyurethane finish
Foam-filled weatherproof housing
Corrosion-resistant stainless steel components
VSWR <1.5:1 in 4G & 5G bands
Heavy-duty pole mount included
Dual female N-type connectors
RoHS Compliant
|
285.22 |
|
|
1685-PW Wideband 4G/5G/LTE/WiFi 9dBi with Antenna Deck Mount
Digital Antenna's omni-directional antenna with stainless steel base provides excellent performance from 600-3000 MHz and is ideal for mobile or fixed locations.
9dBi antenna designed and low profile manufactured in the USA by Digital Antenna, greatly improves signal strength providing a maximum signal range.
For Use with any device that connects to the cellular network or WiFi such as routers, modems, amplified signal boosters & gateways. Available in several mounting options for use on boats, buildings, utilities, M2M, and more marine environments.
Features:
Maximum power for 4G, 5G, WiFi signals
9dBi omni-directional gain
Rugged UV stable polyurethane finish
Foam filled to withstand extreme vibrations
316 stainless steel base
Includes Deck Mount
Weatherproof N female connector
5-year warranty
|
245.83 |
|
|
4G Connect Pro 2G/3G/4G Dual Antenna
Digital Yacht's 4G Connect is a 2G/3G/4G (LTE) internet access solution for use afloat. It utilizes the latest MIMO technology with dual antennas for fast, long-range access and incorporates a full-function wifi router so multiple devices can connect wirelessly. There is also a wired LAN port and WAN port – for connection to high-power wifi devices or satellite modems.
The Pro model ships with two external hi-gain antennas for exceptional long-range performance and is the recommended solution for use afloat.
4G Connect has an easy-to-use interface. It is SIM unlocked so users are free to use any cellular provider they choose.
Operation is simple – turn on, connect to the password-protected wifi hotspot that 4G Connect creates and your device is online. Digital Yacht’s WL510 high-power wifi solution can also be connected to the WAN port for a choice between hotspot wifi and 4G connectivity. iKommunicate can also connect to the LAN port providing boat NMEA data on the wifi network for use with navigation apps.
Features:
Hi-performance 4G/LTE modem for exceptional speed and range with fall back to 2G/3G
SIM unlocked for any network provider
Supplied with 2 x high performance external 48cm antennas for optimum speed and range
7m low loss LMR 200 cable kit included
Supplied with deck base for antennas (as shown)
LTE Class 3 modem offers long range and up to 70Mbps speeds
The recommended solution for offshore use and non-GRP vessels
Wifi interface for tablets and phones
Ethernet LAN port for connection to iKommunicate navigation interface – allows boat NMEA 0183/2000 data to be available on the wifi network – ideal for smartphone and tablet navigation
Ethernet WAN port can connect to satellite or WL510 high power wifi system for combination LTE/WiFi hotspot solution
12V DC operation with <5W power consumption
Optional 1” base adaptor available for antennas
Optional 10 & 20m LMR400 assemblies
Supplied With:
7M Cable Kit
|
789.55 |
|
|
5G Xtream System with 3 Antennas & 7M Cable
For boat owners looking for ultra-fast internet on board, the new 5G Xtream from Digital Yacht offers 4G and 5G connectivity as well as integration with Starlink satellite systems for the best and most affordable blended internet afloat.
The 5G Xtream can support 5G (shoreside) connection speeds up to 3.1GB/s but also integrates a 4G Cat 20 modem, which offers connectivity up to about 25NM from shore at speeds of up to 2GB/s. The system uses three external antennas with dual high-gain vertical antennas and a separate compact dome for the higher 5G frequencies. This MIMO technology and, critically, separate antennas give optimum performance. There’s support for dual SIMs with auto (failover) or manual switching between operators.
The 5G Xtream features dual-band (2.4 and 5GHz) wireless connections, so users on board simply search for the secure wifi point and connect. There are also 4 LAN ports (10/100/1000 MB) for wired devices like smart TVs and a WAN port that is optimized for Starlink satellite connectivity, allowing the 5GX to act as a sophisticated and fast router for all on-board internet communications.
The Wi-Fi router can also be configured to access marina wifi hotspots as an additional method of internet access. This also supports the very latest 5GHz marina wifi services, and there's also a high-gain external wifi antenna available as an accessory.
For advanced users, the 5G Xtream allows for user management, VPNs, blacklists, and IOT applications. NMEA 0183/2000 data can also be connected using Digital Yacht’s LANLink devices. The integrated GPS allows for SMS reporting of boat position or even a geofence/drift setting when the boat is at anchor or in port.
The Digital Yacht 5G Xtream is supplied as a complete solution with antennas, mounts, and cabling – all that’s additionally required is a cellular SIM.
Configuration
Configuration is very simple. Just insert the SIM cards. The 5G Xtream has two standard SIM slots, and it is possible to fit two SIMs from two different network operators. By default, the 5G Xtream will query the SIM that is installed and automatically select the APN settings from its internal database.
However, it is very important that users “lockdown” their wireless network with their network name (SSID) and wireless password. This task only takes a couple of minutes and is done via the 5G Xtream web interface.
User Interface
Accessing 5G Xtream functionality is done via an easy web interface. Any locally connected device can simply enter the IP address into the password-protected interface to set up functions, view traffic and logs, and configure wifi.
Once set up, there should be no requirement to log in other than for diagnostics and configuration. Users simply access the internet through the wifi connection, just as they would in the home or office.
Features:
Ultra-fast 5G internet afloat solution with speeds up to 3.1GBs plus also integrates the latest 4G Cat 20 LTE MIMO technology with a range up to 25NM offshore (network dependent) and 4G connection speeds up to 2GBs
Dual SIM slots with auto-failover or manual selection
Two external, high-gain, wide-bandwidth antennas plus a compact high-gain dome antenna for higher 5G frequencies
Dual-band integrated wifi router (2.4 & 5 GHz)—independently configurable
Built-in GPS with an external patch antenna for IOT and tracking/anchor alarm applications
4 x LAN ports
1 x WAN port for additional internet connectivity, optimized for Starlink satellite systems
Digital input/output connectivity for IoT/control applications
SMS capability
12/24v
Weight: 3800 g
Dimensions: 180 x 125 x 55 mm
operation
Specifications:
Operating Temperature: -40 to +75 degrees C
Dimensions: 180 x 125 x 55mm (excluding antennas)
Weight: 3,8 kg
Protection: IPX4
Technology: 5G Sub-6Ghz SA/NSA. Up to 2.1/3.3Gbps downlink (4×4 MIMO); 4G (LTE) CAT 20 up to 2GB/s
5G/LTE: 5G Sub-6Ghz SA/NSA. Up to 2.1/3.3Gbps downlink (4×4 MIMO); 4G (LTE) CAT 20 up to 2GB/s
3G/4G Fallback (Support bands): 5G (NSA): n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77; 5G (SA): n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78; 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28, B32; 4G (LTE-TDD): B38, B40, B41, B42, B43
4G & 5G Antennas: Dual Wi-Fi band independent 2.4 & 5 GHz (maximum 150 connections); dual 48cm external wideband high gain MIMO supplied with 7-meter cables and mounting bases. (10 & 20m options available) PLUS additional 100mm dome antenna for 4 x 4 MIMO operation and optimized for 5G (7m cable only)
Interfaces: 4 x LAN 10/100 Ethernet Port; 1 x WAN 10/100 Ethernet Port ; WiFi; 802.11 b/g/n/ac
What’s in the Box?
1 x 5G Xtream Modem Unit
1 x DC Power/IO cable
2 x External antennas
2 x E179F antenna bases
2 x 7m LMR200 antenna cables (N male to N male)
1 x 5G dual element dome antenna with pole/1” adaptor mount and integrated 7m cables
2 x Internal wifi antennas
1 x Internal GPS antenna
Options (sold separately):
1” antenna adaptors and range of mounts
10 & 20m LMR400 antenna cable packs for 4G antennas
AC 110/220v power adaptor
4GXWL hi power external wifi option
LANLink NMEA 0183/2000 interface
|
2065.50 |
|
|
Temperature Sensor for BMV-712 Smart & BMV-702
Victron's Temperature Sensor specifically for the BMV-712 and the BMV-702.
Warranty Info
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
37.74 |
|
|
External GPS Antenna for Siren 3 Pro Includes 10' Cable
Optimize GPS tracking of your boat with the External GPS Antenna. When you remotely mount the External GPS Antenna, the Siren 3 Pro will override the use of the internal GPS antenna.
*Compatible with the Siren 3 Pro ONLY
|
59.89 |
|
|
Replacement External WiFi Antenna for Cortex M1
Replacement WiFi antenna for the Cortex V1 & M1. Increase the WiFi range from the M1 (Cortex hub) by installing the external WiFi antenna. The external WiFi antenna comes included with the Cortex M1 or V1. Additionally, the WiFi range can be extended with most third-party 2.4GHz, 802.11b/g/n WiFi boosters.
|
17.99 |
|
|
1664-PW Wideband 4G/5G/LTE/WiFi Omni with F114 & DM194 Deck Mount
Digital Antenna's omni-directional, bullet-shaped antenna with stainless steel base provides excellent performance from 695-3000 MHz and is ideal for mobile or fixed locations.
High gain 9dBi bullet antenna designed and manufactured in the USA by Digital Antenna, greatly improves signal strength providing a maximum signal range. The new design includes a rugged stainless steel base.
For use with any device that connects to the cellular network or WiFi such as routers, modems, and amplified signal boosters and gateways. Available in several mounting options for use on boats, buildings, utilities, M2M, and more.marine environment.
Features:
Maximum power for 4G, 5G, WiFi signals
9dBi omni-directional gain
Rugged UV stable polyurethane finish
Foam filled to withstand extreme vibrations
316 stainless steel base
Includes deck mount
Weatherproof N female connector
5-year warranty
|
251.29 |
|