|
Mate USA M162-010-12 Integrated Switch Pump with Flexible impeller
UP1-JS
7.4 GPM ON-OFF Switch Pump
Volt: 12V & 24V at 8 amp
Gpm: 7.4
Psi: 15
Ports: 1/2" BSP int.
Fresh water: Yes
Salt water: Yes
Greywater: Yes
This Mate USA 7.4 GPM Self-priming electric pump with flexible rubber impeller and ON-OFF switch integrated into the water-proof cap. Ideal for bilge and waste water on any type of boat.
|
263.25 |
|
|
Mate USA M162-002-12 Water Pump with Nitrile flexible impeller
UP1
GPM: 9.2
Volt: 12V
Gpm: 9.2
Psi: 15
Fresh water: Yes
Salt water: Yes
Greywater: Yes
This is the Mate USA 12vdc 9.2 GPM Self-priming electric pump with flexible rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.
|
312.00 |
|
|
Mate USA M162-006-12 Fresh, Bilge & Grey Water Pump With Nitrile Impeller
UP1-M
11.9 GPM
Volt: 12V
Fuse: 14A
Gpm: 11.9
Ports: 1" Barb
Psi: 22
Fresh water: Yes
Salt water: Yes
Greywater: Yes
This Mate USA 11.9 GPM Self-priming electric pump with flexible rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.
|
379.28 |
|
|
Mate USA M162-004-12 Water Pump with Nitrile flexible impeller
UP1-J
GPM: 7.4 GPM
Volt: 12V & 24V
Gpm: 7.4
Psi: 15
Fresh water: Yes
Salt water: Yes
Greywater: Yes
This Mate USA 7.4 GPM Self-priming electric pump with flexible rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.
|
228.15 |
|
|
Mate USA M162-001-1C Water Pump 220V 50HZ PUMP
UP1/AC
7.9 GPM Bilge & Grey Water Pump
Volt: 220V
Fuse 3.3 amp
Ports 1" Barb
Gpm: 7.9
Psi: 14.5
Fresh water: Yes
Salt water: Yes
This Mate USA 7.9 GPM Self-priming electric pump with flexible nitrile impeller. Nickel-plated brass body, shaft in stainless steel AISI 303. Electric motor 0.55 kW. Ideal for transfer of fresh or salt water.
|
671.25 |
|
|
Mate USA M162-001-1B 110V 60HZ PUMP 7.9 GPM
UP1/AC
7.9 GPM Bilge & Grey Water Pump
Volt: 110V
Fuse 3.3amp
Ports 1" Barb
Gpm: 7.9
Psi: 14.5
Fresh water: Yes
Salt water: Yes
This Mate USA 7.9 GPM Self-priming electric pump with flexible nitrile impeller. Nickel-plated brass body, shaft in stainless steel AISI 303. Electric motor 0.55 kW. Ideal for transfer of fresh or salt water.
|
855.00 |
|
|
Mate USA M162-006-13 Fresh, Bilge & Grey Water Pump with Nitrile Impeller
UP1-M
11.9 GPM
Volt: 24V
Fuse: 7A
Gpm: 11.9
Ports: 1" Barb
Psi: 22
Fresh water: Yes
Salt water: Yes
Greywater: Yes
This Mate USA 11.9 GPM Self-priming electric pump with flexible rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.
|
379.28 |
|
|
Mate USA M162-002-13 Water Pump with Nitrile flexible impeller
UP1
GPM: 9.2
Volt: 24V
Gpm: 9.2
Psi: 15
Fresh water: Yes
Salt water: Yes
Greywater: Yes
This is the Mate USA 24vdc 9.2 GPM Self-priming electric pump with flexible rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.
|
312.00 |
|
|
Mate USA M162-004-13 Water Pump with Nitrile flexible impeller
UP1-J
GPM: 7.4
Ports: 3/4" Barb
Volt: 24V
Fuse 4 amp
Gpm: 7.4
Psi: 15
Fresh water: Yes
Salt water: Yes
Greywater: Yes
This Mate USA 7.4 GPM Self-priming electric pump with flexible rubber impeller. Is fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.
Note: image is showing a 12volt pump, This pumps is 24v.
|
228.15 |
|
|
Mate USA M164-020-12 12V GEAR PMP FOR LUBR OIL
Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations.
Part n.16402012
Product NameUP3/OIL
Voltage (V)12
Consumption (A)5
Fuse (A)7.5
Self-priming (m)1
Flow rate ⌀ 6 (l/h)20
Flow rate ⌀ 8 (l/h)60
Flow rate ⌀ 13 (l/h)330
Hose (mm)13
Pressure (bar)2
Ports (BSP)3/8″
Motor power (W)90
|
302.25 |
|
|
Mate USA M164-700-15 Electronic Diesel and Oil Pump Helical Bronze Gears
UP2/E-BR
2.6 GPM Electronic Diesel and Oil Pump
Volt: 12V & 24V
Gpm: 2.6
Psi: 29
Diesel: Yes
Oil: Yes
This Mate USA 2.6 GPM Self-priming Automatic electric pump,12/24V, with constant pressure electronic control for the transfer of diesel and oil. Helical bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. The pump is supplied with a “High-Speed” setting for Diesel transfer and it's set to interact with a SCS control panel allowing the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.
|
403.65 |
|
|
Mate USA M164-720-15 Electronic Diesel and Oil Pump with Helical Bronze Gears
UP6/E-BR
6.9 GPM Electronic Diesel and Oil Pump
Volt: 12V & 24V
Gpm: 6.9
Psi: 36
Diesel: Yes
Oil: Yes
This Mate USA 6.9 GPM Self-priming Automatic electric pump,12/24V, with constant pressure electronic control for the transfer of diesel and oil. Helical bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. The pump is supplied with a “High-Speed” setting for Diesel transfer and it's set to interact with a SCS control panel allowing the switch to the “Low-Speed” mode for the transfer of oil and viscous liquids.
|
962.10 |
|
|
Mate USA M164-200-12 12V GEAR PUMP 2.6 GPM DIESEL
FEATURES
Pump Body: Nickel Plated Brass
Port Size: 3/8" BSP (British) Female Threaded Ports and 3/8" NPT Male Threaded Ports
Flow: Up To 2.6 GPM
Pressure: 21.8 PSI
Gears:Bronze
Shaft Seal: Lip Type
Shaft: Stainless Steel
Motor:12 Volt
Heavy Duty Ball Bearing Design
Motors are ISO 8849 Marine (Bilge Standard)
IP Protection 67
APPLICATIONS
Diesel Transfer
Refueling,
Light Weight Oils,
Fresh Water and Glycol Antifeeze
|
206.70 |
|
|
Mate USA M164-000-12 12V GEAR PUMP 4GPM DIESEL
Self-priming electric pumps of small dimensions with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel, antifreeze.
Part n.16400012
Product NameUP3
Voltage (V)12
Consumption (A)6
Fuse (A)10
Self-priming (m) 1.5
Flow rate (l/min) 15
Hose (mm)13
Pressure (bar)2
Ports (BSP)3/8″
Motor power (W)120
|
291.53 |
|
|
Mate USA M164-660-15 Water Pressure Systems 12 or 24 volts
This Mate USA 2.6 GPM Self-priming automatic electric pumps with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.
UP2/E
2.6 GPM Water Pressure System
Volt: 12V & 24V
Fuse:7.5A
Gpm: 2.6
Psi: 29
Ports: 3/8"NPT
Fresh water: Yes
Salt water: Yes
|
280.80 |
|