March 0125-0113-0100 Large Base Fits LC-2CP-MD, LC-3CP-MD March Pump models Kit includes base plate and four Rubber isolation grommets made from Polypro/Glass (Black) Does not include mounting screws Use existing base screws to attach to the pump

March 0125-0029-0100 Impeller Mag Assembly  

March 0125-0055-0100 Impeller Mag Assembly Impeller (Molded) 1.812 Dia for 2C-MD, AC-2CP-MD, LC-2CP-MD made of Polypro/Teflon/Glass

March 0125-0057-0100 Rear Housing Rear Housing & Plug Assembly LC for LC-2CP-MD made of Polypro/Glass

March 0125-0083-0100 Drive Magnet .250" Bore Fits March Pumps: 809, 815, AC-2CP-MD, BC-2CP-MD, LC-2CP-MD Cruisair PML250, PML250C   Note: This will not fit 809 BR 24vdc With Non-replaceable brushes  

March 0125-0028-0100 Pump Housing  

March Wet End Part # 0125-0108-0100 March Pump- Wet End Assembly Includes All Parts except Motor, Bracket and Drive Magnet   0125-0108-0100 WET END KIT 6PK AC-2CP-MD

March 0130-0113-0100 WET END KIT For AC-3CP-MD March Pump Wet End Assembly Includes All Parts except Motor, Bracket and Drive Magnet

March 0125-0142-0100 Marine Pump LC-2M-MD March Pump’s industrial LC-2M-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 5 gallons per minute at 1 foot, and its maximum head is 13 Feet (5.5PSI). The LC-2M-MD pump may be used submerged or not submerged. The pump is Ignition Protected per SAE J1171 and ISO 8846.  It is capable of 12,000 BTU a hour. Max Flow: 18.5 LPM Max Head: 2.7 M Power: 0.014 KW   Electrical/Air: 230V 50/60Hz   230V Motor 6 Foot Cord, Submersible 60Hz: 1Ph 0.025HP/0.019kW, 0.53 AMPS, 3450RPM 50Hz: 1Ph 0.18HP/0.014kW, 0.72 AMPS, 2850RPM   Inlet: 3/8"FPT & 3/4"MPT Outlet: 1/4"MPT   Submersible: Yes   Wet End: Polypropylene (Front Housing, Impeller), Nylon (Rear Housing) Viton (O-Ring), Buna N (O-Ring, Cooling Tube Seal), 316 Stainless Steel (Shaft, Cooling Tube), Ceramic (Thrust Washer), Ceramic Magnet Uses: Submersible or Open Air When submerged, the following is also in contact with the solution: Epoxy, Buna N, Cord Max Internal Pressure: 25 PSI / 1.7 bar Max Internal Temperature: 130 °F / 54 °C Ignition Protected per SAE J1171 and ISO 8846: Rated IP67

March 0125-0141-0100 Marine Pump LC-2M-MD March Pump’s industrial LC-2M-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 5 gallons per minute at 1 foot, and its maximum head is 13 Feet (5.5PSI). The LC-2M-MD pump may be used submerged or not submerged. The pump is Ignition Protected per SAE J1171 and ISO 8846.  It is capable of 12,000 BTU a hour. Max Flow: 5 GPM Max Head: 13 FT Power: 0.02 HP   Electrical/Air: 115V 50/60Hz   115V Motor 6 Foot Cord, Submersible 60Hz: 1Ph 0.2HP/0.015kW, 0.92 AMPS, 3450RPM 50Hz: 1Ph 0.18HP/0.014kW, 1.1 AMPS, 2850RPM   Inlet: 3/8"FPT & 3/4"MPT Outlet: 1/4"MPT   Submersible: Yes   Wet End: Polypropylene (Front Housing, Impeller), Nylon (Rear Housing) Viton (O-Ring), Buna N (O-Ring, Cooling Tube Seal), 316 Stainless Steel (Shaft, Cooling Tube), Ceramic (Thrust Washer), Ceramic Magnet Uses: Submersible or Open Air When submerged, the following is also in contact with the solution: Epoxy, Buna N, Cord Max Internal Pressure: 25 PSI / 1.7 bar Max Internal Temperature: 130 °F / 54 °C Ignition Protected per SAE J1171 and ISO 8846: Rated IP67

March BC-2CP-MD 12V DC BRUSH Part# 0125-0123-0100

March 0135-0113-0200 Encap Impeller  

March AC-2CP-MD Mag Drive March Pump's industrial AC-2CP-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 5 gallons per minute at 2 feet, and its maximum head is 13 Feet (or around 5.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ceramic, and Ceramic Magnet. The inlet connection is 0.375 female pipe thread and 0.75 male pipe thread, and the outlet is 0.25 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.025 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-2CP-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.   Unit System 60Hz 50Hz Max Flow 5 GPM 18.5 LPM Max Head 13 FT 2.7 M Power .025 HP .018 KW Electrical 115V 60HZ   Type Centrifugal Mag Drive Inlet 3/8"FPT & 3/4"MPT Outlet 1/4"MPT Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washer), Ceramic Magnet   March 0125-0069-0100

March 0115-0112-0100 1A Kynar Coated Nylon Impeller (Encaps) 1.125 Dia (Kynar Coated Magnet)

March 0125-0018-1000 Base Screws