|
Myers Pumps 19197D000 Case Ejecto Sw 3/4 & 1Hp
Myers 19197D000 Case for use with Model HJ75S, HJ100S, Series HJ
|
597.63 |
|
|
Myers Pumps 25882A546 Venturi .546 Hole 3-15/16
Myers 25882A546 Venturi, for use with Model HJ75S, Series HJ
|
51.03 |
|
|
Myers Pumps CMV5A-11 Sewage Pump 1/2Hp 115V
Myers CMV5A-11 is a 1/2-horsepower, 115-volt sewage pump that is designed for demanding residential installations. It is made with a combination of cast iron and thermoplastic for corrosion resistance. It also has a recessed vortex impeller that can handle solids up to 2 inches in diameter.
|
684.13 |
|
|
Myers Pumps 16622B010 Impeller Complete 1/2Hp
Plastic Impeller for use with Model 1/2 HP, Series QD, HJ
|
84.63 |
|
|
Myers Pumps ME50S-11 Effluent Pump 1/2Hp 115V
Myers ME50S-11, Effluent Pump, 1/2 HP, 115 Volts, Manual, 1 Phase, 20 ft Cord, Cast Iron, 2 Inch Discharge
Features
Two-vane cast iron impeller design provides maximum dosing efficiency
Enclosed design for high-efficiency pumping
Eliminates possibility of jamming between impeller and volute
Passes full 3/4" solids
Durable motor will deliver many years of reliable service
Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
Optional seal leak probe warns of seal leak condition (dual seal motors only); helps prevent costly motor damage
Motors have a winding current and temperature-sensitive overload (single phase only)
Volute seal ring is replaceable; restores pump to original performance if wear should occur
Motor is held in place by 4 screws; easily removed if service if ever needed
|
1771.38 |
|
|
Myers Pumps 25886A500 Venturi Plastic 1/2 Hole
Myers 25886A500 Venturi for use with Model HJ50S, Series HJ, HR
|
41.58 |
|
|
Myers Pumps MDC33V20 Sump Pump 0.33HP 115V 20' Cord Automatic
Myers MDC Series Sump Pump Typical Applications
Basement Sumps
Dewatering
Water Transfer
Light Septic Tank Effluent
|
420.81 |
|
|
Myers Pumps 05014A166 Gasket
Rubber Gasket, 2-1/8" OD
|
7.56 |
|
|
Myers Pumps 19196B014 Impeller Plastic
Myers 19196B014 Plastic Impeller for use with 3/4, 1 HP, Series QD
|
58.24 |
|
|
Myers Pumps 14379B001 Diffuser Plastic
Myers 14379B001 Diffuser for use with 3/4, 1 HP, Series QD
|
62.79 |
|
|
Myers Pumps 05014A157
Rubber Gasket 6X5 3/4 X 1/8
|
14.45 |
|
|
Myers Pumps MS33PV1 Sump Pump 1/3Hp 115V 8'Cd
Myers MS33PV10, MS Series, Sump Pump with Vertical Float Switch, 1/3 HP, 115 Volts, 1 Phase, 1-1/2 NPT Discharge, 52 GPM Max, 24 ft Max Head, Automatic, 10 ft Cord
Features
3/16" solid handling
Maintenance-free operation
Vertical float switch for sump pits with 10" diameter or larger
Dual ball-bearing motor and additional lip seal for durability and longer pump life
Durable PSC motor for years of service
Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
Thermal overload protection with automatic reset
Zinc motor housing
Thermoplastic volute case
CSA listed
Lead Time: Average 7-10 Days, Factory Back Order.
|
293.22 |
|
|
Little Giant Submersible Pump 501086
Little Giant 1-T Submersible Pump
Motor 115 Volt 60 Hz 1/150 HP Permanently Lubricated Oil Filled Motor, 205 GPH at 1 Foot Head, Shutoff Head 7.4 Feet, Inlet: Snap Off Screen, Outlet: 1/4" MNPT with Elbow for 1/2" Tubing, Epoxy Coated Aluminum Housing, Fluid Temperature Up to 120F (49C), UL/CSA Listed, 10 Foot Power Cord
501086 For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild chemicals such as soap solutions, acids, plating solutions and fertilizers
|
181.74 |
|
|
Little Giant Submersible Pump 501020
Little Giant 1-YS Submersible Pump
Motor 115 Volt 60 Hz 1/150 HP Permanently Lubricated Oil Filled Motor, 205 GPH at 1 Foot Head, Shutoff Head 7.4 Feet, Inlet: Screened, Outlet: 1/4" MNPT with Elbow for 1/2" Tubing, Aluminum Housing, Viton Seal, Fluid Temperature Up to 120F (49C), UR/C-CSA Listed, 6 Foot Power Cord- No Plug
501020 Submersible pump for use with stoddard solvent and deodorized kerosene submerged parts washer applications only. For pumping unheated metal parts cleaning solvent that is UL classified as PJQU.
These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F.
|
219.96 |
|
|
Little Giant Submersible Pump 500286
Little Giant 1-AT Submersible Pump
Motor 115 Volt 60Hz 1/200 HP Permanently Lubricated Oil Filled Motor, 170 GPH at 1 Foot Head, Shutoff Head 7 Feet, Inlet: Snap Off Screen, Outlet: 1/4" MNPT with Elbow for 1/2" Tubing, Epoxy Coated Aluminum Housing, Fluid Temperature Up to 120F (49C), UL/CSA Listed, 10 Foot Power Cord
500286 For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated.
This pump is not recommended for aquariums, swimming pools and fuel oil transfer.
|
156.78 |
|