|
Myers Pumps 26442C000 Seal Plate
|
39.69 |
|
|
Groco 037-075-8 Lip Shaft Seal, 3/8"
|
6.14 |
|
|
|
4.39 |
|
|
Myers Pumps 14525A000K Shaft Seal 5/8"
Mechanical Seal 5/8"
Replaces Myers 14525A000, 14525A010
|
33.08 |
|
|
Myers Pumps 11416A000 Seal
Myers 11416A000K Shaft Seal for use with Model HC-33, HC-50, HC-75, HC-100, Series HC
|
98.28 |
|
|
Myers Pumps 25208A015 Parts Kit for Model QD Pumps
Myers 25208A015 Parts Kit for 3/4HP & 1HP QD Pumps.
Contains Shaft Seal, Impeller, Diffuser, Gasket, O-Ring, Venturi and Nozzle for Shallow or Deep Well Pumps.
|
291.20 |
|
|
Myers Pumps 25208A001 Parts Kit
Myers 25208A001 PK50 Parts Kit for 1/2 HP. For Models: HT, HR, HJ and QD Jet Pumps.
Parts kit contains: Shaft seal, impeller, diffuser, gasket, O-ring, venturi and nozzle necessary to overhaul either shallow or deep well jet pumps.
|
242.97 |
|
|
Myers Pumps 25208A002 Parts Kit
Myers 25208A002 PK75 Parts Kit for 3/4 HP. Models HT and HJ Jet Pumps.
Parts kit contains: Shaft seal, impeller, diffuser, gasket, O-ring, venturi and nozzle necessary to overhaul either shallow or deep well jet pumps.
|
291.20 |
|
|
Myers Pumps ME50S-11 Effluent Pump 1/2Hp 115V
Myers ME50S-11, Effluent Pump, 1/2 HP, 115 Volts, Manual, 1 Phase, 20 ft Cord, Cast Iron, 2 Inch Discharge
Features
Two-vane cast iron impeller design provides maximum dosing efficiency
Enclosed design for high-efficiency pumping
Eliminates possibility of jamming between impeller and volute
Passes full 3/4" solids
Durable motor will deliver many years of reliable service
Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
Optional seal leak probe warns of seal leak condition (dual seal motors only); helps prevent costly motor damage
Motors have a winding current and temperature-sensitive overload (single phase only)
Volute seal ring is replaceable; restores pump to original performance if wear should occur
Motor is held in place by 4 screws; easily removed if service if ever needed
|
1771.38 |
|
|
Myers Pumps 21181A017 Shaft Seal 3/4 for B/CA/CE
|
34.97 |
|
|
Myers Pumps 11716A001K Shaft Seal 718
|
85.54 |
|
|
Myers Pumps 20560D000K Diffuser
Myers 20560D000K Plastic diffuser for use with 1-1/2 HP and 2 HP Myers QP pump models:
QP15
QP15-3
QP15-03
QP20
QP20-3
QP20-03
|
111.02 |
|
|
Myers Pumps MS33PV1 Sump Pump 1/3Hp 115V 8'Cd
Myers MS33PV10, MS Series, Sump Pump with Vertical Float Switch, 1/3 HP, 115 Volts, 1 Phase, 1-1/2 NPT Discharge, 52 GPM Max, 24 ft Max Head, Automatic, 10 ft Cord
Features
3/16" solid handling
Maintenance-free operation
Vertical float switch for sump pits with 10" diameter or larger
Dual ball-bearing motor and additional lip seal for durability and longer pump life
Durable PSC motor for years of service
Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
Thermal overload protection with automatic reset
Zinc motor housing
Thermoplastic volute case
CSA listed
Lead Time: Average 7-10 Days, Factory Back Order.
|
293.22 |
|
|
Myers Pumps ME100S-23 Effluent Pump 1Hp
Myers Pumps ME100S-23 Solids Handling Effluent Pump
1 HP, 230 Volts
3 Phase
2" Discharge
3/4" Solids
|
2300.06 |
|
|
Myers Pumps MW200-23 2Hp 230V 3Ph 60Hz
Myers MW200-23, MW Series, Sewage Pump, 2 HP, 230 Volts, 3 Phase, 2" NPT Vertical Discharge, 162 GPM Max, 70 ft Max Head, 20 ft Cord, Manual
Myers MW200-23 Series Specifications
VOLTAGE: 3ø, 230V, 60Hz
HORSEPOWER: 2.0 HP
AMP DRAW (full load): 7.7
MOTOR TYPE: Permanent Split Capacitor (PSC)
RPM: 3450
MAXIMUM HEAD: up to 70'
MAXIMUM CAPACITY: up to 165 GPM
MINIMUM SUMP DIAMETER: Simplex: 24” Duplex: 36”
SWITCH TYPE: Manual
DISCHARGE PIPE SIZE: 2.0" NPT
MAXIMUM SOLIDS HANDLING SIZE: 2.0"
IMPELLER TYPE: Ductile Iron, Enclosed
CORD LENGTH: 20'
BODY CONSTRUCTION: Cast Iron
MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)
|
2603.54 |
|