|
Myers Pumps QP50KIT Pump End Assembly
Myers QP50KIT is a replacement field assembly kit for 5 HP motors. It is a pump kit only.
|
2499.53 |
|
|
Myers Pumps 2C200 Pump & Motor Assembly
Myers Pumps 2C200 Two Stage Centrifugal Pumps, 2 HP, 115/230 Volts, 1 Phase Motor Enclosure Type: ODP - Open Drip Proof.
Model Number 26681D009
|
2982.53 |
|
|
Myers Pumps QP10KIT Pump End Assembly
Quick Prime Pump End Only, Cast Iron, Field Assembly Kit for 1HP Motor, 1-1/2"NPT Ports, 51.3GPM at 10' Head, 108' Head Max, Composite Impeller
Lead Time: Average 7-10 Days, Factory Back Order.
|
892.08 |
|
|
Myers Pumps QP30KIT Pump End Assembly
Quick Prime Pump End Only, Cast Iron, Field Assembly Kit for 3HP Motor, 1-1/2"NPT Ports, 93GPM at 10' Head, 121' Head Max, Brass Impeller
Pump Kit Only, replacement Field assembly kit for 3 HP motors. Impeller type is No Lead Brass. Pump only - no Motor.
|
1076.88 |
|
|
Myers Pumps QP20KIT Pump End Assembly
Quick Prime Pump End Only, Cast Iron, Field Assembly Kit for 2HP Motor, 1-1/2"NPT Ports, 78.9GPM at 10' Head, 116' Head Max, Brass Impeller
Lead Time: Average 7-10 Days, Factory Back Order.
|
1092.00 |
|
|
Myers Pumps QP15KIT Pump End Assembly
Quick Prime Pump End Only, Cast Iron, Field Assembly Kit for 1-1/2HP Motor, 1-1/2"NPT Ports, 71.7GPM at 10' Head, 111' Head Max, Composite Impeller
Lead Time: Average 7-10 Days, Factory Back Order.
|
1124.76 |
|
|
Myers Pumps QP10BKIT Pump End Assembly
Quick Prime Pump End Only, Cast Iron, Field Assembly Kit for 1HP Motor, 1-1/2"NPT Ports, 51.3GPM at 10' Head, 108' Head Max, Brass Impeller
Lead Time: Average 7-10 Days, Factory Back Order.
|
1138.20 |
|
|
Myers Pumps QP15BKIT Pump End Assembly
Quick Prime Pump End Only, Cast Iron, Field Assembly Kit for 1-1/2HP Motor, 1-1/2"NPT Ports, 71.7GPM at 10' Head, 111' Head Max, Brass Impeller
Lead Time: Average 7-10 Days, Factory Back Order.
|
1186.08 |
|
|
Myers Pumps HJ75D Jet Pump & Motor Assembly
115v/230v Double Ball Bearing Motor w/ Voltage Selector Switch
SUCTION SIZE:1-1/4" NPT
DRIVE SIZE:1" NPT
DISCHARGE SIZE:1" NPT
VOLTAGE:230v / 115v AC, 60 Hz
|
1357.98 |
|
|
Myers Pumps 13069B000 Screen
Screen PERF PL SHT 1/16THK .15
|
53.87 |
|
|
Myers Pumps ME50S-11 Effluent Pump 1/2Hp 115V
Myers ME50S-11, Effluent Pump, 1/2 HP, 115 Volts, Manual, 1 Phase, 20 ft Cord, Cast Iron, 2 Inch Discharge
Features
Two-vane cast iron impeller design provides maximum dosing efficiency
Enclosed design for high-efficiency pumping
Eliminates possibility of jamming between impeller and volute
Passes full 3/4" solids
Durable motor will deliver many years of reliable service
Oil-filled motor for maximum heat dissipation and continuous bearing lubrication
Optional seal leak probe warns of seal leak condition (dual seal motors only); helps prevent costly motor damage
Motors have a winding current and temperature-sensitive overload (single phase only)
Volute seal ring is replaceable; restores pump to original performance if wear should occur
Motor is held in place by 4 screws; easily removed if service if ever needed
|
1771.38 |
|
|
Myers Pumps 20560D000K Diffuser
Myers 20560D000K Plastic diffuser for use with 1-1/2 HP and 2 HP Myers QP pump models:
QP15
QP15-3
QP15-03
QP20
QP20-3
QP20-03
|
111.02 |
|
|
Myers Pumps 25208A015 Parts Kit for Model QD Pumps
Myers 25208A015 Parts Kit for 3/4HP & 1HP QD Pumps.
Contains Shaft Seal, Impeller, Diffuser, Gasket, O-Ring, Venturi and Nozzle for Shallow or Deep Well Pumps.
|
291.20 |
|
|
Myers Pumps MW200-23 2Hp 230V 3Ph 60Hz
Myers MW200-23, MW Series, Sewage Pump, 2 HP, 230 Volts, 3 Phase, 2" NPT Vertical Discharge, 162 GPM Max, 70 ft Max Head, 20 ft Cord, Manual
Myers MW200-23 Series Specifications
VOLTAGE: 3ø, 230V, 60Hz
HORSEPOWER: 2.0 HP
AMP DRAW (full load): 7.7
MOTOR TYPE: Permanent Split Capacitor (PSC)
RPM: 3450
MAXIMUM HEAD: up to 70'
MAXIMUM CAPACITY: up to 165 GPM
MINIMUM SUMP DIAMETER: Simplex: 24” Duplex: 36”
SWITCH TYPE: Manual
DISCHARGE PIPE SIZE: 2.0" NPT
MAXIMUM SOLIDS HANDLING SIZE: 2.0"
IMPELLER TYPE: Ductile Iron, Enclosed
CORD LENGTH: 20'
BODY CONSTRUCTION: Cast Iron
MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)
|
2603.54 |
|
|
Myers Pumps 5014A166 Gasket
For Myers Pump Models:
QP10
QP10-3
QP15
QP15-3
QP20
QP20-3
QP30
QP30-3
|
11.34 |
|