Temperature Sensor for PowerCombi Mastervolt Temp Sensor specifically for PowerCombi. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Temperature Sensor for BMV-712 Smart & BMV-702 Victron's Temperature Sensor specifically for the BMV-712 and the BMV-702. Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

Temperature Sensor for Quattro, MultiPlus & GX Devices A temperature sensor for MultiPlus or Quattro Inverter Charger and also GX Devices. Please contact your dealer for any returns, repairs or support issues related to this product.

PowerCombi Pure Sine Wave Inverter/Charger - 12V - 2000W - 100 Amp Kit Simple. Independent. Flexible. The PowerCombi is a pure sine wave inverter/charger offering grid quality AC power and battery charging in one low profile design. Designed to be an independent inverter/charger, it yet can easily be integrated into a MasterBus network (with additional interface). With a built-in transfer switch, 2x surge for 3 seconds and on-site dipswitch programming—the PowerCombi offers simple installation with multiple operating modes, and can charge various battery chemistries—including a custom profile for use with Li-ion. Full certifications make it perfect for use in RV's, boats, and specialty vehicles. Add a battery temperature sensor (BTS), remote display and a communication interface for custom applications. Features: Input voltage range: 10-15.5V DC Includes temperature sensor and powercombi remote Can be used with Flooded, Gel, AGM and custom battery types MasterBus compatible via CZone - MasterBus Interface Specifications: Amperage: 100 Amps Amperage Draw at Rest: 3 Amps (idle power) Multi Bank Chargers: 1 Bank Output Wave Form: Pure Sine Wave Type: Inverter/Charger Voltage: 12V DC

PowerCombi Pure Sine Wave Inverter/Charger - 1200W - 12V - 50A Kit Simple. Independent. Flexible. The PowerCombi is a pure sine wave inverter/charger offering grid quality AC power and battery charging in one low profile design. Designed to be an independent inverter/charger, it yet can easily be integrated into a MasterBus network (with additional interface). With a built-in transfer switch, 2x surge for 3 seconds and on-site dipswitch programming—the PowerCombi offers simple installation with multiple operating modes, and can charge various battery chemistries—including a custom profile for use with Li-ion. Full certifications make it perfect for use in RV's, boats, and specialty vehicles. Add a battery temperature sensor (BTS), remote display and a communication interface for custom applications. Features: Input voltage range: 10-15.5V DC Includes temperature sensor and powercombi remote Can be used with Flooded, Gel, AGM and custom battery types MasterBus compatible via CZone - MasterBus Interface

Coolant Temperature Sensor - 40°C to 120°C - M16 x 1.5 Thread Features: Measurement Range - +40°C - 120°C Category - Temperature Sensors Signal Analogue - 287.4 - 22.7 Ohm Operating Voltage - 6 - 24 V Temperature medium - Coolant - Water - Air - Engine oil - Transmission oil - Fuel Communication - Analog Signal Output - 287.4 - 22.7 Ohm Sensor Signal - Common Ground Sensor Connector - M4 Plastic Knurled Nut Thread - M16 X 1.5 Male Warning Contact - None Connector Type - M4 Kunststof Kartelmoer *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Alternator Temperature Sensor When using the Alpha Pro in combination with non-Mastervolt alternators, this alternator temperature sensor may offer additional protection against over heating.

Battery Temperature Sensor - 6M This temperature sensor is included with every battery charger. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Coolant Temperature Sensor - 40°C to 120°C - M14 x 1.5 Thread Features: Measurement Range - 40°C - 120°C Category - Temperature Sensors Signal Analogue - 287.4 - 22.7 Ohm Operating Voltage - 6 - 24 V Temperature medium - Coolant - Water - Air - Engine oil - Transmission oil - Fuel Communication - Analog Signal Output - 287.4 - 22.7 Ohm Sensor Signal - Common Ground Sensor Connector - AMP Male 6.3 X 0.8 mm Thread - M14 X 1.5 Male Warning Contact - None Connector Type - AMP Blade 6.3 X 0.8 mm *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Coolant Temperature Sensor - 40°C to120°C - 3/8 -18 NPTF Thread Features: Measurement Range - 40°C - 120°C Category - Temperature Sensors Signal Analogue - 287.4 - 22.7 Ohm Operating Voltage - 6 - 24 V Temperature medium - Coolant - Water - Air - Engine oil - Transmission oil - Fuel Communication - Analog Signal Output - 287.4 - 22.7 Ohm Sensor Signal - Common Ground Sensor Connector - AMP Male 6.3 X 0.8 mm Thread - 3/8" - 18 NPTF Male Warning Contact - None Connector Type - AMP Blade 6.3 X 0.8 mm *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Coolant Temperature Sensor - 40°C to120°C - 5/8 -18UNF-3A Thread Features: Measurement Range - 40°C - 120°C Category - Temperature Sensors Signal Analogue - 287.4 - 22.7 Ohm Operating Voltage - 6 - 24 V Temperature medium - Coolant - Water - Air - Engine oil - Transmission oil - Fuel Communication - Analog Signal Output - 287.4 - 22.7 Ohm Sensor Signal - Common Ground Sensor Connector - AMP Male 6.3 X 0.8 mm Thread - 5/8" - 18 UNF-3A Male Warning Contact - None Connector Type - AMP Blade 6.3 X 0.8 mm *Sold as an Individual    This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Coolant Temperature Sensor - 40°C to 120°C - M15 x 1.5 Thread Features: Measurement Range 40°C - 120°C Category - Temperature Sensors Signal Analogue - 287.4 - 22.7 Ohm Operating Voltage - 6 - 24 V Temperature medium - Coolant - Water - Air - Engine oil - Transmission oil - Fuel Communication - Analog Signal Output - 287.4 - 22.7 Ohm Sensor Signal - Common Ground Sensor Connector - AMP Male 6.3 X 0.8 mm Thread - M16 X 1.5 Male Warning Contact - None Connector Type - AMP Blade 6.3 X 0.8 mm *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Coolant Temperature Sensor - 40°C to 120°C - 1/8 - 27NPTF Features: Measurement Range - 40°C - 120°C Category - Temperature Sensors Signal Analogue - 287.4 - 22.7 Ohm Operating Voltage - 6 - 24 V Temperature medium - Coolant - Water - Air - Engine oil - Transmission oil - Fuel Communication - Analog Signal Output - 287.4 - 22.7 Ohm Sensor Signal - Common Ground Sensor Connector - AMP Male T-Model 6.3 X 0.8 mm Thread1/8" - 27 NPTF Male Warning Contact - None Connector Type - AMP Blade T-Model 6.3 X 0.8 mm *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Coolant Temperature Sensor - 40° to 120°C - M10 x 1 Tapered Short Features: Measurement Range - 40°C - 120°C Category - Temperature Sensors Signal Analogue - 287.4 - 22.7 Ohm Operating Voltage - 6 - 24 V FunctionalityCoolant Temperature Communication - Analog Signal Output - 287.4 - 22.7 Ohm Sensor Signal - Common Ground Sensor Connector - AMP Male T-Model 6.3 X 0.8 mm Thread - M10 X 1 Male Warning Contact - None Connector Type - AMP Blade T-Model 6.3 X 0.8 mm *Sold as an Individual   This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Coolant Temperature Sensor - 40° to 120°C - 1/2" - 14NPTF Features: Measurement Range - +40°C - 120°C Category - Temperature Sensors Signal Analogue - 287.4 - 22.7 Ohm Operating Voltage - 6 - 24 V Temperature medium - Coolant - Water - Air - Engine oil - Transmission oil - Fuel Communication - Analog Signal Output - 287.4 - 22.7 Ohm Sensor Signal - Insulated Return Sensor Connector - AMP Male 6.3 X 0.8 mm Thread1/2" - 14 NPTF Male Warning Contact - None Connector Type - AMP Blade 6.3 X 0.8 mm *Sold as an Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.