LED Power Module  This RGB controller is designed to work with select Infinity marine receivers, including the KAPPRV515.  With 9 total inputs, you can add and control LED speakers, additional lighting, and more.  There's an output that will allow you to daisy-chain additional Milennia RGB modules. Features: Designed to work with select Infinity marine receivers Control LED speakers, additional lighting, and more Made for marine and outdoor use In the Box: Power module Wiring harness - 7" Mounting hardware *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Livewell Lamp - White Completely sealed, power-saving LED Livewell/Baitwell lamps are designed for installation into live bait tanks with wall thicknesses up to 26mm. Featuring a durable polycarbonate housing, the lamp provides soft light. Supplied with a plastic nut and rubber gaskets for a watertight seal, installation is swift and secure in often inaccessible locations. Features: Color: White LED Voltage: 12V IP67 Completely Sealed 5-Year Warranty Specifications: Housing Description: Heavy-duty polycarbonate Light Source: LED Installation: Pre-wired with 120mm of cable Operating Voltage: 12V DC Power Consumption: 0.5W (<0.04A@12V) Degree of Protection: Completely sealed Mounting: Single hole Rubber gaskets included

LED Livewell Lamp - Blue Completely sealed, power-saving LED Livewell/Baitwell lamps are designed for installation into live bait tanks with wall thicknesses up to 26mm. Featuring a durable polycarbonate housing, the lamp provides soft light. Supplied with a plastic nut and rubber gaskets for a watertight seal, installation is swift and secure in often inaccessible locations. Features: Color: Blue LED Voltage: 12V IP67 Completely Sealed 5-Year Warranty Specifications: Housing Description: Heavy-duty polycarbonate Light Source: LED Installation: Pre-wired with 120mm of cable Operating Voltage: 12V DC Power Consumption: 0.5W (<0.04A@12V) Degree of Protection: Completely sealed Mounting: Single hole Rubber gaskets included

Module 70 Gen 4 LED Floodlight - White Housing - Long Range - 2100 Lumens The popular Module 70 LED floodlight has been seriously upgraded. Now producing 2100 lumens light output for only 21W consumption. The housing is also finished in a new premium Corosafe coating for even more resistance in extreme operating conditions. Despite its small dimensions, the new Module 70 Gen 4 has three high-performance LEDs that generate 2100 lumens of crisp white light while consuming just 21W of power. (1.75A @ 12V DC) The close-range lens offers a wide and even distribution, ideal for cockpit, foredeck, and work area illumination. Completely sealed (IP6K9K) and coated with the new CoroSafe technology this lamp is particularly suitable for the tough marine environment. Offering improved protection from damage with two extra layers and the combination of different coating processes, making the work lamp substantially more resistant to corrosion. Advanced Multivolt 9-33V electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery conditions. Pre-wired with marine cable and a single bolt 316 stainless steel bracket, this work light can be installed quickly. Like all Hella marine LED lamps Module 70 is supported with a 5-year warranty for complete peace of mind. Features: LED 12/24V Multivolt IP67 Completely Sealed UV Resistant 5-Year Warranty Specifications: Material Description: UV and impact-resistant plastic front housing Die-cast aluminum body Glass lens Bracket: 316 stainless steel 2100 Lumens Color Temperature: 6500K Cable: Pre-wired with 2.0m of twin core marine cable Operating Voltage: Multivolt 9-33V DC Degree of Protection: IP 67 - Completely Sealed Power Consumption: 21W (1.75A@12V DC/0.88A@24V DC)  Cable: Pre-wired with 1M marine cable Installation: Upright or pendant

Module 70 Gen 4 LED Floodlight - White Housing - Long Range - 800 Lumens Durable and efficient LED floodlights offering power-saving illumination. Capitalizing on the electronic and optical performance of the larger body LED Mega Beam series, Hella marine Module 70 LED lamps offer state-of-the-art technology and performance in a smaller housing. Offering 800 lumens of crisp white light for a low power consumption of 15W (1.25A @ 12V), the compact high technology lamps provide substantial power savings compared to 55W halogen lamps. The completely sealed module 70 series provides ultra-durable ‘fit and forget’ advantages with ongoing reliability in applications subject to high vibration, impact, and shock loads. Features: LED 12/24V Multivolt IP67 Completely Sealed UV Resistant 800 Lumens 5-Year Warranty Specifications: Material Description: UV and impact-resistant plastic front housing Die-cast aluminum body Glass lens Bracket: 316 stainless steel Color Temperature: 6500K Cable: Pre-wired with 2.0m of twin core marine cable Operating Voltage: Multivolt 9-30V DC Degree of Protection: IP 67 - Completely Sealed Power Consumption: 13W (<1.08A@12V / <0.54A@24V) Weight: 500g (including cable) Light Output: 800 lumens (Gen III) Approvals: CE

One-Touch Leveling LED Control   Lectrotab's one-touch leveling LED control puts the complete control of your trim tabs at your fingertips.   Convenience, easy of use and reliability will make boating more enjoyable.  Features: Microprocessor-based trim tab control with LED tab position indicators Single-button press to move both tabs up or down simultaneously Automatic return to last tab position if the ignition key is turned off and back on again Completely sealed, completely waterproof and will not deteriorate in sunlight No external power module required for single or dual actuator per tab systems LED tab position indicators dim automatically in darkness and brighten in the sunlight Adjustable programming features Technical Specifications: Display Color - Black Actuators per Tab Plate - One (1) or Two (2) Dimensions (W x H) - 3" x 3" (77 x 77 mm) Mounting Hole Cutout (H x W) - 2.25" x 2.5" (57 to 64 mm) Operating Voltage - 12 or 24 V *Sold as an Individual

Joystick LED Trim Tab Control Lectrotab’s Joystick LED control incorporates features requested by boat owners to provide user-friendly control for a more enjoyable boating experience. Features: Single “Joystick” control NMEA 2000 compatible LED display of each trim tab position Microprocessor-based trim tab control with LED tab position indicators NMEA 2000 compatible with JLC-NMEA adapter Move both tabs up or down simultaneously with a single motion Dual station ready – just add a second JLC-11 and JR-* cable (sold separately) Automatic return to last tab position if the ignition key is turned off and back on again Completely sealed, completely waterproof, and will not deteriorate in sunlight Automatic tab retraction and calibration with key or accessory switch off Easy upgrade from any of our Lectrotab controls No external power module required LED tab position indicators dim automatically in darkness and brighten in sunlight Single or Dual Actuator per tab Operates on 12 or 24 VDC systems Specifications: Display Color: Black Number of Stations/Actuators: Single or Dual Station/1 or 2 Actuator/tab Overall Width: 3.0"/77mm Overall Height/Thickness: 3.0" (77mm)/2.0" (50mm) Mounting Hole Cutout (Diameter): 2.625"/66.7mm DC Voltage: 12/24 Fuse Size Power Input (1 Actuator Per Tab): 12 VDC-15 or 20 AMPs 24 VDC = 10 AMPs Fuse Size Aux. (Must Connect): 1 to 2 AMPs

P12 Battery Charger LED Remote LED Indicators Charging LED- Quick check for green light confirms charging Charge Stage- Displays charging stage Equalize LED- Indicates the charger is currently in equalization mode Fan Mode- Indicates charger's internal fan mode Charge Output- Displays the percentage of output current for each battery. Will also indicate maximum output setting when maximum output is adjusted to accommodate for AC source limitations Alert- Icon LEDs provide warning and alert status for quick diagnostics Four Control Buttons Fan- User adjustable settings Dim/ Alarm- Provides adjustment to brightness of LEDs on display as well as Silence function for alarms Output- User adjustable charger output when AC source limitations exist that require lowering the AC current draw Power- Places P12 Battery Charger into standby mode WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Light Armor Underwater LED Light - 12 LEDs - Blue Light Armor Underwater Lights from Attwood, a line of premium surface-mount LED lights that are engineered to be the brightest and most durable lights in the industry. Like all Light Armor products, they're technically advanced, built to perform in the harshest marine environments, and backed by an industry-leading 10-year warranty. Intelligently Engineered for Strength and Durability Exclusive Heat-Sync Cooling System with Active Overheat Protection Resistant to corrosion, chemicals, and UV Damage Extreme impact-resistant lens 3' sheathed wire Reverse polarity protection Fully-sealed waterproof electronics Simple installation with minimal mounting hardware Low-profile design Electro-polished 316 stainless steel cover WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel LED (CREE) Docking Lights  These Docking Lights are constructed of corrosion resistant stamped 304 stainless steel. Features two high power Cree LEDs providing 1300 lux light output from the front array, with a focused beam angle of 10° for a concentrated light beam. Eight regular LEDs on the top array have a wide-angle beam of 90° to illuminate a large portion of the dock area. Front lights and top lights can be controlled separately. Their small footprint makes for easy installation. Surface mounted with two #8 RH fasteners (not included). 300 lumens. Low amp draw of 0.28 @ 12VDC. IP68 waterproof rating. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2" Flush Mount LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0 Extremely versatile, this flush mount LED POD provides powerful light in a very compact size, allowing users to utilize it in countless scenarios. This Cree LED flush mount is great for ATVs, RZRs, Jeeps, trucks, work lights, and anything users can mount this powerful 2x2 LED light on. Black Oak's lab has tested and tested to ensure their LEDs are of the highest quality available. IP69K durability is a standard issue for everyone one of these guys, giving users hassle-free durability and protecting against over 30 types of harsh conditions. The flush mount LED truck lights put out an unimaginable amount of light, considering this series of lights has a compact appearance. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Flood lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Front bumper lighting for trucks and Jeeps Reverse lights Work lights Headache rack lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.6 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height): 4-7/8" x 3-5/8" In the Box: 2” flush mount pod light with flood optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

2" Flush Mount LED Pod Light - Diffused Optics - Black Housing - Pro Series 3.0 Extremely versatile, this flush mount LED POD provides powerful light in a very compact size, allowing users to utilize it in countless scenarios. This Cree LED flush mount is great for ATVs, RZRs, Jeeps, trucks, work lights, and anything users can mount this powerful 2x2 LED light on. Black Oak's lab has tested and tested to ensure their LEDs are of the highest quality available. IP69K durability is a standard issue for everyone one of these guys, giving users hassle-free durability and protecting against over 30 types of harsh conditions. If users are looking at a reverse light or a light for the rear bumper, the diffused option is the perfect set up, throwing light out in a 120° pattern! The flush mount LED truck lights put out an unimaginable amount of light, considering this series of lights has a compact appearance. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Diffused lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Front bumper lighting for trucks and Jeeps Reverse lights Work lights Headache rack lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.6 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height): 4-7/8" x 3-5/8" In the Box: 2” flush mount pod light with diffused optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

2" Marine Flush Mount LED Pod Light - Diffused Optics - White Housing - Pro Series 3.0 Extremely Versatile, the Marine Flush Mount LED POD provides powerful light in a very compact size, allowing users to utilize it in countless scenarios. This Cree LED flush mount is great for ATVs, RZRs, Jeeps, trucks, work lights, and anything else users can mount this powerful 2x2 LED light on. Black Oak's lab has tested and tested to ensure their LEDs are of the highest quality available. IP69K durability is a standard issue for everyone one of these guys, giving users hassle-free durability and protecting against over 30+ types of harsh conditions. If users are looking at a reverse light or a light for their rear bumper, the Diffused option is the perfect setup, throwing light out in a 120° pattern! This flush-mount LED truck light puts out an unimaginable amount of light, considering its compact appearance.  Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Diffused lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Front bumper lighting for trucks and Jeeps Reverse lights Work lights Headache rack lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.6 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height): 4-7/8" x 3-5/8" In the Box: 2” flush mount pod light with diffused optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

24" White LED All-Round Navigation Light Features: Polymer Top and Base with Clear Frosted Lens New stylish high-tech design with self-contained LED module LED optics adjust based on pole mount angles Available in standard pole lengths from 24" to 60" Fits all Perko® 0° and 5° plug-in mounting bases The retail package includes locking and large threaded collars Meets Global Specs for ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nm Meets Current USA and European Standards for LED Navigation Lights Specifications: Voltage: 12 Volt DC Wattage: 1.28 watts Amperage: 0.10 amps 2-Mile (USCG 2nm) Certified Screw Size: #8 Pole: 3/4" Aluminum Tube Fits Bases: 1045, 1046, 1047, 1048, 1049 & 1060

30" White LED All-Round Navigation Light Features: Polymer Top and Base with Clear Frosted Lens New stylish high-tech design with self-contained LED module LED optics adjust based on pole mount angles Available in standard pole lengths from 24" to 60" Fits all Perko® 0° and 5° plug-in mounting bases The retail package includes locking and large threaded collars Meets Global Specs for ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nm Meets Current USA and European Standards for LED Navigation Lights Specifications: Voltage: 12 Volt DC Wattage: 1.28 watts Amperage: 0.10 amps 2-Mile (USCG 2nm) Certified Screw Size: #8 Pole: 3/4" Aluminum Tube Fits Bases: 1045, 1046, 1047, 1048, 1049 & 1060