|
ChargeMaster 25 Amp Battery Charger - 3 Bank, 12V
Power you can rely on.
Always on course with Mastervolt...
Mastervolt ensures you an electrical system with no weak links and a dependable and silent power supply. Whether for recreational or professional purposes, with Mastervolt you always have power you can rely on... The power to be independent.
ChargeMaster Battery Chargers
Make the most of your batteries with the ChargeMaster, plugging in and charging anywhere in the world. Mastervolt's ChargeMaster guarantees fast and complete charging of your batteries no matter where you are. The ChargeMaster can charge multiple battery banks simultaneously thanks to its combined functionality. Moreover, all ChargeMasters can be easily connected to a MasterBus network with only one cable and one connection. You also have the option of central, local or remote monitoring, configuration and control of your system. The ChargeMaster is available in various models to guarantee you the ideal battery charger for any situation and demand.
Features:
3-Step+ charging technology for fast and complete charging
Safe and complete charging due to standard safety features
Memory function prevents overcharging in case of an unstable power supply
Clear control panel
Easy to install
Built-in system functionality (MasterBus) in combination with other Mastervolt products
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
368.23 |
|
|
ChargeMaster Battery Charger - 12 Amp - 3 Bank - 24V
Power You Can Rely On
Make the most of your batteries with the ChargeMaster, plugging in and charging anywhere in the world. Mastervolt’s ChargeMaster guarantees fast and complete charging of your batteries no matter where you are. The ChargeMaster can charge multiple battery banks simultaneously thanks to its combined functionality. Moreover, all ChargeMasters can be easily connected to a MasterBus network with only one cable and one connection (not available on ChargeMaster 24/6). You also have the option of central, local or remote monitoring, configuration and control of your system. The ChargeMaster is available in various models to guarantee you the ideal battery charger for any situation and demand.
Charging Your Batteries With Every Voltage
The Mastervolt ChargeMaster supplies a maximum capacity wherever you are via auto-ranging. Auto-ranging ensures perfect fully automatic operation anywhere in the world, regardless of the available mains voltage (90-265 V AC, 50 or 60 Hz). The 3-step+ charging technology guarantees fast and complete charging, while the cos phi 1 regulation gets the most out of limited generator capacity.
Sturdy Connections
Metal-on-metal fitting gives a firm connection, and prevents corrosion or overheating of contact surfaces.
Charging Multiple Battery Banks
The ChargeMaster series has three equal charge outputs. Those of the smaller ChargeMaster models are pre-installed with two meters of cable for a plug & play solution, while the heavier models have one full output (for example for your service battery) and two outputs of 10 A, ideal for your starter batteries.
Features:
3-Step+ charging technology for fast and complete charging.
Safe and complete charging due to standard safety features.
Memory function prevents overcharging in case of an unstable power supply.
Clear control panel.
Easy to install.
Built-in system functionality (MasterBus) in combination with other Mastervolt products (not available on ChargeMaster 24/6).
General Specifications
Nominal output voltage: 24 V
Total charge current:12 A
Number of battery outlets: 3
Charge current second output: 12 A
Charge current third output:12 A
Battery capacity range: 24-120 Ah
Nominal input voltage: 120/230 V (90-265 V), 50/60 Hz
AC connection: 2M AC cable
Power supply mode: yes
Display/read-out: LED display
Fastening: 4x screw
Dimensions, H x W x D: 234 x 132 x 60 mm / 9.2 x 5.2 x 2.4 inch
Weight: 1.8 kg / 4.0 lb
Approvals:CE, ABYC A-31, SAE J1171/ISO8846 ignition protected
Technical Specifications
Charge characteristic: IUoUo, automatic / 3-step+ for gel/AGM/wet/Lithium Ion
Charge voltage Bulk: 28.8 V
Charge voltage Absorption: 28.5 V
Absorption time: 4 hours
Charge voltage Float (wet batteries): 26.5 V
Charge voltage Float (gel/AGM batteries): 27.6 V
Temperature compensation: -60 mV/ °C -33 mV/ °F
Voltage compensation: automatic
Power consumption (DC side): < 2 mA
Full load consumption (230 V AC): 435 W
Current Control function: no
Power factor control: ≥ 0.98
Temperature range (ambient temp.): -25 °C to 60 °C, derating > 25 °C -13 °F to 140 °F
Sound level: < 52 dBA at 1M
Protection degree: IP23
Protections: over temperature, over load, short circuit, high/low battery voltage
Cooling: vario fan
MasterBus compatible: yes
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
499.44 |
|
|
ProTournamentelite 360 Battery Charger - 3 Bank - Global/CZone
With all of the innovation, performance, and features of the new ProTournamentelite series3 ProMariner has engineered the offering to include three high-power connected global models with ProMariner's integrated Czone communication feature, which provides: battery chemistry, charge mode, real-time charging voltage, amperage, and fault status.
Features:
IP67-sealed waterproof design
Line of sight, charge status, AC glow plug
Selectable Turbo Charge Mode
Forced power flow cooling
4 digitally selectable charge profiles
Dual-mode battery status monitor
Distributed-On-Demand Technology™
Specifications:
Volts: 12/24/36
Total Amps: 36
Battery Banks: 3
Cable Length: 6 ft.
Size (inch): 9.3" x 4.2" x 14.7
Weight: 16.1 pounds
AC In/Max Amps: 100-240 VAC / 8 A
|
635.99 |
|
|
TRUECHARGE™2 Battery Charger
Redesigned, High Performance, Worldwide Charging
Xantrex TRUECHARGE™2 Battery Chargers lead the industry with a small footprint and ultra-compact design.
Now with PARALLEL STACKING FEATURE
This NEW feature allows two chargers to work together to combine the output current, achieving up to 40A for large battery banks.
Product Info
In addition to meeting global safety and regulatory standards, TRUECHARGE™2 Battery Chargers feature low electrical interference and superior, efficient, power factor corrected multistage charging. TRUECHARGE™2 Battery Chargers can be mounted virtually anywhere, given their unique drip-proof design. With certified ignition protection, even a gasoline engine room is an alternative for installation*. Trouble-free installation is ensured with easy-to-access AC and DC wiring compartments and reverse-polarity battery protection.
Performance Features
12-volt models
Microprocessor-controlled, multistage charging algorithms
Settings for two and three-stage charging
Settings for flooded, gel, AGM or lead-calcium batteries
Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other low-quality power sources
Temperature-compensated charging
Power factor corrected for efficient charging
Battery-equalization feature
Ability to charge 'dead' batteries
Battery temperature sensor available (Part #808-0232-01)
Protection Features
Reverse battery polarity protection
Drip-proof design
Over and under-temperature protection
DC over-voltage protection
Battery overcharging protection
Ignition protection
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
312.66 |
|
|
TRUECHARGE™2 Battery Charger
Redesigned, High Performance, Worldwide Charging
Xantrex TRUECHARGE™2 Battery Chargers lead the industry with a
small footprint and ultra-compact design.
Now with PARALLEL STACKING FEATURE
This NEW feature allows two chargers to work together to combine the output current, achieving up to 80A for large battery banks.
Product Info
In addition to meeting global safety and regulatory standards, TRUECHARGE™2 Battery Chargers feature low electrical interference and superior, efficient, power factor corrected multistage charging. TRUECHARGE™2 Battery Chargers can be mounted virtually anywhere, given their unique drip-proof design. With certified ignition protection, even a gasoline engine room is an alternative for installation*. Trouble-free installation is ensured with easy-to-access AC and DC wiring compartments and reverse-polarity battery protection.
Performance Features
12-volt models
Microprocessor-controlled, multistage charging algorithms
Settings for two and three-stage charging
Settings for flooded, gel, AGM or lead-calcium batteries
Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other low-quality power sources
Temperature-compensated charging
Power factor corrected for efficient charging
Battery-equalization feature
Ability to charge 'dead' batteries
Battery temperature sensor available (Part #808-0232-01)
Protection Features
Reverse battery polarity protection
Drip-proof design
Over and under-temperature protection
DC over-voltage protection
Battery overcharging protection
Ignition protection
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
394.87 |
|
|
7608 BatteryLink® Charger (North America) - 12V - 20Amp - 2 Bank
Charge at or away from the Dock
Compact 12V 20A – 2 Bank AC Charger
170A Continuous ACR
Remote Emergency Jump Start
Battery Temperature Compensation
Remote Display Included
IP67 Waterproof
Specifications:
Total Output Current: 20A
Nominal Voltage: 12V DC
Number of Outputs: 1 Negative/2 Positive
Terminal Stud Torque: 60 in-lb (6.78 Nm)
Continuous Rating: 65A
Intermittent Rating: 115A
Universal AC Input Voltage: 90-265V AC
AC Input Frequency: 50/60Hz
Typical Float Voltage: 13.5V DC
Battery Types: AGM/Flooded/TPPL
Cable Size to Meet Ratings: 10 AWG Negative Cable/6 AWG Positive cable
Maximum Battery CCA: 850CCA
Maximum Cable Size: 1/0 AWG (50mm)
Operating Current: 10mA/60mA
Plug Style: North American: NEMA 5-15P
Recommended Battery Bank Sizes: 60Ah Minimum
Terminal Stud Size: 1/4"-20
Warranty: 5 Year
Combine 30 sec: 13.5V
Combine 2 Min: 13.0V
Open 10 sec: 12.35V
Open 30 sec: 12.75V
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
352.07 |
|
|
25A Battery Charger - 24V - 2-Bank - 3-Stage w/Dip Switch & Lugs - Includes Temp Sensor
This advanced fully automatic three-stage 25 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit, reverse polarity and thermal overload protection. The unit allows charging of up-to 2 separate battery banks.
Features:
Switch mode technology for high efficiency, lightweight and quiet operation
Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell
Can charge 2 banks of batteries simultaneously, no isolator necessary
Can be used as a power supply or DC UPS when used in conjunction with a battery
User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz
User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of standalone and loaded Lead Acid Batteries
“Half Power Mode” reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries
Voltmeter and Ammeter for monitoring
Fan cooled based on output current
Protections: Short circuit, overload, reverse battery connection and over temperature
Includes temperature sensor to prevent under/overcharging of battery if temperature varies extensively
Specifications:
Input: 120 VAC or 230 VAC
Output: 24 VDC
Amps: 25
Remote Control: 900-RC
Weight: 9 (lbs)
Weight: 4.1 (kg)
Dimensions: 13.03 x 9.6 x 3.82 (in)
Dimensions: 331 x 244 x 97 (mm)
Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B
Warranty: 2 Year Limited
Applications:
Test bench
Automotive
Marine
Communications sites
Battery back-up systems
Hobby
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
441.41 |
|
|
TRUECHARGE™2 Battery Charger
Redesigned, High Performance, Worldwide Charging
Xantrex TRUECHARGE™2 Battery Chargers lead the industry with a small footprint and ultra-compact design.
Product Info
In addition to meeting global safety and regulatory standards, TRUECHARGE™2 Battery Chargers feature low electrical interference and superior, efficient, power factor corrected multistage charging. TRUECHARGE™2 Battery Chargers can be mounted virtually anywhere, given their unique drip-proof design. With certified ignition protection, even a gasoline engine room is an alternative for installation*. Trouble-free installation is ensured with easy-to-access AC and DC wiring compartments and reverse-polarity battery protection.
Performance Features
12-volt models
Microprocessor-controlled, multistage charging algorithms
Settings for two and three-stage charging
Settings for flooded, gel, AGM or lead-calcium batteries
Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other low-quality power sources
Temperature-compensated charging
Power factor corrected for efficient charging
Ability to charge 'dead' batteries
Battery temperature sensor available (Part #808-0232-01)
Protection Features
Reverse battery polarity protection
Drip-proof design
Over and under-temperature protection
DC over-voltage protection
Battery overcharging protection
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
208.44 |
|
|
ProTournamentelite 500 Battery Charger - 5 Bank - Global/CZone
With all of the innovation, performance, and features of the new ProTournamentelite series3 ProMariner has engineered the offering to include three high-power connected global models with ProMariner's integrated Czone communication feature, which provides: battery chemistry, charge mode, real-time charging voltage, amperage, and fault status.
Features:
IP67-sealed waterproof design
Line of sight, charge status, AC glow plug
Selectable Turbo Charge Mode
Forced power flow cooling
4 digitally selectable charge profiles
Dual-mode battery status monitor
Distributed-On-Demand Technology™
Specifications:
Volts: 12/24/36/48 + Eng
Total Amps: 50
Battery Banks: 5
Cable Length: 6 ft.
Size (inch): 9.3" x 4.2" x 16.6"
Weight: 18.0 pounds
AC In/Max Amps: 100-240 VAC/10 A
|
839.99 |
|
|
BatteryLink® Charger - 10Amp - 2-Bank
Charge two batteries at or away from the dock with a 10A multistage battery charger and integrated 65A Automatic Charging Relay (ACR)
AC charging at the dock: Use AC shore power to charge two isolated battery banks with the 3 Stage 10 Amp battery charger
DC charging away from the dock: Share the DC power from the alternator with both the Start and the Auxiliary battery through the integrated 65A ACR
Battery Temperature Compensation prolongs battery life
Start isolation protects sensitive electronics from voltage sags and spikes
Includes LED remote indicator for charge status at the helm
Snap-on insulating cover
One-piece stainless flange nuts ensure safe and secure connections
Specifications
Total Output Current: 10A
Nominal Voltage: 12V DC
Number of Outputs: 1 negative / 2 positive
Terminal Stud Torque: 60 in-lb (6.78 Nm)
Continuous Rating:65A
Intermittent Rating:115A
Universal AC Input Voltage: 90-265V AC
AC Input Frequency: 50/60Hz
Typical Float Voltage:13.5V DC
Battery Types: AGM / Flooded / TPPL - Do not mix battery types
Cable Size to Meet Ratings:10 AWG Negative Cable / 6 AWG Positive Cable
Maximum Battery CCA: 850CCA
Maximum Cable Size: 1/0 AWG (50mm)
Operating Current: 10mA (No AC Power, ACR Open) / 60mA (No AC Power, ACR Closed)
Recommended Battery Bank Sizes: 60Ah Minimum
Terminal Stud Size:1/4"-20 (accepts M6 ring terminal)
Warranty: 5 Year
Combine 30 sec: 13.5V
Combine 2 Min: 13.0V
Open 10 sec: 12.35V
Open 30 sec: 12.75V
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
204.91 |
|
|
15A Battery Charger - 12V - 3-Bank - 3-Stage w/Dip Switch & Lugs
This advanced fully automatic three-stage 15 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload and short-circuit protection. The unit allows charging of up-to 3 separate battery banks.
Features:
High efficiency
Commercial Grade
Lightweight
Quiet operation
Industry Proven Design – 1000s of units in operation
2 or 3 stage charging (user selectable)
120 or 230 VAC, 50/60 Hz (user selectable)
Voltage meter display – Ammeter and LED power status
For all types of Lead Acid batteries
Charge with a battery load or stand alone
Use as a power supply or DC UPS
UPC: Universal Protection Circuit – short circuit, overload, reverse battery polarity
Charge 3 banks of batteries at once – no isolator necessary
Specifications:
Input: 120 VAC 60 Hz or 230 VAC 50 Hz
Output: 12 VDC
Amps: 15 Amps
Weight: 4.4 (lbs)
Weight: 1.96 (kg)
Dimensions: 8.5 x 8.5 x 3 (in)
Dimensions: 21.6 x 21.6 x 7.6 (cm)
Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B
Warranty: 2 Year Limited
Applications:
Automotive
Recreational vehicles
Marine
Communications sites
Battery back-up systems
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
174.96 |
|
|
50A Battery Charger - 12V - 2-Bank - 3-Stage w/Dip Switch & Lugs - Includes Temp Sensor
This advanced fully automatic three-stage 50 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.
Features:
Switch mode technology for high efficiency, lightweight and quiet operation
Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell
Can charge 2 banks of batteries simultaneously, no isolator necessary
Can be used as a power supply or DC UPS when used in conjunction with a battery
User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz
User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of stand-alone and loaded Lead Acid Batteries
“Half Power Mode” reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries
Voltmeter and Ammeter for monitoring
Fan cooled based on output current
Protections: Short circuit, overload, reverse battery connection and over temperature
Includes temperature sensor to prevent under/overcharging of battery if temperature varies extensively
Specifications:
Input: 120 VAC 60 Hz or 230 VAC 50 Hz
Output: 12 VDC
Amps: 50
Remote Control: 900-RC
Weight: 9.0 (lbs)
Weight: 4.1 (kg)
Dimensions: 13.03 x 9.60 x 3.82 (in)
Dimensions: 331 x 244 x 97 (mm)
Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B
Warranty: 2 Year Limited
Applications:
Automotive
Recreational vehicles
Marine
Communications sites
Battery back-up systems
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
445.22 |
|
|
80A Battery Charger - 12V - 2-Bank - 3-Stage w/Dip Switch & Lugs - Includes Temp Sensor
This advanced fully automatic three-stage 80 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.
Features:
Switch mode technology for high efficiency, lightweight and quiet operation
Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell
Can charge 2 banks of batteries simultaneously, no isolator necessary
Can be used as a power supply or DC UPS when used in conjunction with a battery
User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz
User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of standalone and loaded Lead Acid Batteries
“Half Power Mode” reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries
Voltmeter and Ammeter for monitoring
Fan cooled based on output current
Protections: Short circuit, overload, reverse battery connection and over temperature
Includes temperature sensor to prevent under/overcharging of battery if temperature varies extensively
Specifications:
Input: 120 VAC 60 Hz or 230 VAC 50 Hz
Output: 12 VDC
Amps: 80
Remote Control: 900-RC
Weight: 9 (lbs)
Weight: 4.1 (kg)
Dimensions: 15 x 9.61 x 3.82 (in)
Dimensions: 381 x 244 x 97 (mm)
Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B
Warranty: 2 Year Limited
Applications:
Automotive
Recreational vehicles
Marine
Communications sites
Battery back-up systems
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
632.32 |
|
|
30A Battery Charger - 12V - 3-Bank - 3-Stage w/Dip Switch & Lugs
This advanced fully automatic three-stage 30 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 3 separate battery banks.
Features:
High efficiency
Commercial Grade
Lightweight
Quiet operation
Industry Proven Design – 1000s of units in operation
2 or 3 stage charging (user selectable)
120 or 230 VAC, 50/60 Hz (user selectable)
Voltage meter display – Ammeter and LED power status
For all types of Lead Acid batteries
Charge with a battery load or stand alone
Use as a power supply or DC UPS
UPC: Universal Protection Circuit – short circuit, overload, reverse battery polarity
Charge 3 banks of batteries at once – no isolator necessary
Specifications:
Input: 120 VAC 60 Hz or 230 VAC 50 Hz
Output: 12 VDC
Amps: 30 Amps
Weight: 7 (lbs)
Weight: 3.17 (kg)
Dimensions: 10.5 x 8.5 x 3 (in)
Dimensions: 26.7 x 21.6 x 7.6 (cm)
Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B
Warranty: 2 Year Limited
Applications:
Automotive
Recreational vehicles
Marine
Communications sites
Battery back-up systems
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
245.04 |
|
|
15A Battery Charger - 24V - 3-Bank - 3-Stage w/Dip Switch & Lugs
This advanced fully automatic three-stage 15 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 3 separate battery banks.
Features:
High efficiency
Commercial Grade
Lightweight
Quiet operation
Industry Proven Design – 1000s of units in operation
2 or 3 stage charging (user selectable)
120 or 230 VAC, 50/60 Hz (user selectable)
Voltage meter display – Ammeter and LED power status
For all types of Lead Acid batteries
Charge with a battery load or stand alone
Use as a power supply or DC UPS
UPC: Universal Protection Circuit – short circuit, overload, reverse battery polarity
Charge 3 banks of batteries at once – no isolator necessary
Specifications:
Input: 120 VAC or 230 VAC
Output: 24 VDC
Amps: 15 Amps
Remote Control: 900-RC
Weight: 6 (lbs)
Weight: 2.72 (kg)
Dimensions: 10.5 x 8.5 x 3 (in)
Dimensions: 26.7 x 21.6 x 7.6 (cm)
Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B
Warranty: 2 Year Limited
Applications:
Automotive
Recreational vehicles
Marine
Communications sites
Battery back-up systems
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
245.04 |
|