Micro/Mid Powertap Tee - FM (left)/5 Meter 4 Wire Power drop (bottom)/FM (right)

Micro Tee - Male (Left), Female (Bottom) & Female (Right) - *Case of 6* Male (left) Female (right) Female (Bottom) A Tee is used to tap into the trunk line for adding a drop connection. The standard tee is also available with a cap for a protected diagnostic connection. Tees can be mated with all other devices on the network of the same connector style. Gold contacts for greatest reliability Keyed connectors for error-free connections

NMEA2000 Micro Cable 6M Double Ended - Male to Female - Straight Cable NMEA2000 Micro 6M Double-Ended This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RF25N Rudder Feedback w/Link & Micro-C Cable - 5M The RF25 is a medium duty rudder feedback unit with Micro-C interface. The RF25 will attach directly to industry standard Micro-C systems for straight-forward installation. Features: +/- 120° Measurement Precise and Accurate; +/- 0.5° Micro-C Connectivity 5.5M attached Micro-C Cable

5M Power & Analog Video Cable for Nightwave Power and analog video replacement cable for Nightwave. This is a SIONYX official accessory.

5M Power Cable for Alpha Displays Connect the Alpha Performance Display with a single cable for both power and data, meaning fewer cables to run through the mast and the deck. Features: 5-meter Power & RayNet cable Suitable for both 7” and 9” Alpha Displays

Micro Tee A Tee is used to tap into the trunk line for adding a drop connection. The standard tee is also available with a cap for a protected diagnostic connection. Tees can be mated with all other devices on the network of the same connector style. Gold contacts for greatest reliability Keyed connectors for error-free connections Male (left) Female (right) Female (Bottom)

Maretron NMEA 2000 Starter Kit Building a New NMEA 2000 Network onboard? Save when buying this Maretron NMEA 2000 Starter Kit. Everything you need for a basic NMEA 2000 Bus/Network or to start a complex one. Please see the ACCESSORIES tab above if additional equipment is needed The Kit Includes: One Micro/Mid Powertap Tee CF-SPWR05-CF Two Micro Tee CM-CF-CF Two Micro Terminators TR-CM One 3 meter Cordset CM-CG1-CF-03.0

Mini Tee A Tee is used to tap into the trunk line for adding a drop connection. Gold contacts for greatest reliability Keyed connectors for error-free connections Male (left) Female (Bottom) Female (right)

Micro Bulk Cable Single Piece - 100M Spool Micro bulk cable is primarily used as drop cable, but it can also be used as the trunk line depending on network power requirements. Bulk cable with field-attachable connectors allows for maximum flexibility as cables can be made on the job to exact lengths. Features: Single Piece 100M Spool Length Trunk of drop cable for use with Micro Connectors Used with field attachable connectors to build exact length cables at the job site

Micro Cap - Used to Cover Female Connector Micro cap used to cover female connectors.

Micro Inline Termination Resistor The inline terminator is used where the NMEA 2000® network is terminated at a product, for example the top of the mast at a weather instrument or GPS antenna/receiver. The inline terminator plugs directly into the product with the other end connected to the network cable Micro Termination resistors usually terminate the network by plugging into a tee. The inline terminator doesn't require a tee and easily fits within an instrument's mounting pipe where a tee wouldn't Rugged, IP-68 rated connectors (submersible) for continued connection integrity in marine environment

Micro Field-Attachable Connector Field-attachable connectors allows you to make field connections to bulk cable. The color-coded screw terminals match the individual wire colors found within the bulk cable for error-free field installation. Color-coded screw terminals make for error-free field installation Rugged housing material designed to withstand harsh marine environments

Micro Termination Resistors Termination Resistors are required on a NMEA 2000® network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge. Screw terminal connector for positive connections Termination resistors are used to terminate both ends of the trunk line

Like the straight Micro/Mid Field-attachable connectors, the 90 degree field attachable connectors allow you to make field conections to bulk cable. The 90 degree connectors are particularly well suited for tight spaces like the back of displays where there is limited space for a straight connector. Useful in tight spaces or where sharp corners need to be made Waterproof rated to IP67