|
Service Kit
Jabsco Service Kit is for Manual 29090 and 29120 Series Toilets from 1998-2007.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
83.26 |
|
|
Jabsco Pumps and Pump Parts
Jabsco is a worldwide leading manufacturer of products for the leisure marine market, including water systems, engine cooling pumps, searchlights and marine waste systems. Anywhere a pump is needed aboard a pleasure-boat or small work-boat, for engine cooling, bilge pumping, fresh or waste water handling.
Miner Repair Kits Jabsco Minor Service Kit for Jabsco Pumps Contains Impeller, Seal and Cover .
Major Rebuild Kits Jabsco Major Service Kit for Jabsco Pumps Contains All Internal Service Parts Except the Shaft .
All kits are put together at time of order so you will see the quantity on hand listed as 0.
Jabsco Service Parts
|
|
|
Sherwood P2708X-J Cummins Replacement Engine Cooling Raw Water Pump
Product Information & Specs:
Uses JMP Impeller p/n: 7608-01K
Port Type: 1.75" Flange
Pump Weight (approx): 11 LBS (5 KG)
Replaces Genuine Cummins Pump Models: 5268375, 4948142, 3974455
Replaces Sherwood Pump Models: P2701X, P2701-01, P2702-01, P2706-01, P2708X, P2710-01
For Engine Models: QSB5.9, QSB6.9
Parts Internally Compatible to Genuine: NO (changes to Impeller, Wear Plate, Cam, Mechanical Seal, and Shaft for Better Performance & Quality)
Major Service Kit (All Internal Parts): JSK0068 (*Sold Separately)
Minor Service Kit: JSM0002 (*Sold Separately)
100% Plug & Play Replacement
Spline Drive
Heavy Duty Marine Grade Casting
Marine Grade Shaft (3X Series Non-Magnetic)
O-Ring End Cover Packing
High Performance Impeller
High Volume Flow Capacity
Fast Flow Capacity
|
749.08 |
|
|
Scot Pump 35068-J-2.50 MOTOR/PUMP 2.5" IMPELLER
Pump
• All Bronze marine centrifugal pump Freshwater or seawater applications
• Precision machined to close tolerances for consistent performance.
• Hardware - Type 303 stainless steel
• Semi-open impeller handles solids
• Heavy-duty. Use for continuous 24 hour – 7 day operation.
• Stainless steel shaft.
Shaft Seal
• Rated at 75 PSI – 5 BAR
• Seawater Buna rubber parts, ceramic stationary and carbon rotating element, stainless steel spring and metal components
Motor – 2 Pole
• Totally enclosed fan cooled IP-44 motors meet marine, European, and Coast Guard ignition protected requirements.
• Sealed ball bearings
• Single-phase capacitor start 50 Hz - 110/220 Volt 60 Hz – 115/230 Volt
• Motors are dual frequency 50 Hz or 60 Hz
• Three phase motors are not available
|
1031.22 |
|
|
Scot Pump 35068-J-3.00 MOTOR/PUMP 3" IMPELLER
Pump
• All Bronze marine centrifugal pump Freshwater or seawater applications
• Precision machined to close tolerances for consistent performance.
• Hardware - Type 303 stainless steel
• Semi-open impeller handles solids
• Heavy-duty. Use for continuous 24 hour – 7 day operation.
• Stainless steel shaft.
Shaft Seal
• Rated at 75 PSI – 5 BAR
• Seawater Buna rubber parts, ceramic stationary and carbon rotating element, stainless steel spring and metal components
Motor – 2 Pole
• Totally enclosed fan cooled IP-44 motors meet marine, European, and Coast Guard ignition protected requirements.
• Sealed ball bearings
• Single-phase capacitor start 50 Hz - 110/220 Volt 60 Hz – 115/230 Volt
• Motors are dual frequency 50 Hz or 60 Hz
• Three phase motors are not available
|
1031.22 |
|
|
Sherwood G-1012-J Engine Cooling Pump JPR-ON7312
Replaces Cummins Onan A032Y747, 132-0464, Sherwood G1012, G1009.
Engine Models MDKDS, MDKDT, MDKDU, MDKBT, MDKBU, QD 22.5/27/29 kW Generator
Uses JMP Flexible Impeller p/n: 7300-01K
Port Type: Hose
Drive Type: Spline Drive
Pump Weight (approx): 7.75 LBS (3.52 KG)
Replaces Cummins Onan Pump p/n(s): A032Y747, 132-0464
Replaces Sherwood Pump p/n(s): G1012, G1009
For Engine Model(s) MDKDS/T/V, MDKBT/BU: MDKDS, MDKDT, MDKDU, MDKBT, MDKBU, QD 22.5/27/29 kW Generator
Parts Internally Compatible to Genuine: NO (Changes made for Better Quality & Performance)
|
453.66 |
|
|
JMP Sherwood P1719X-J John Deere Replacement Pump JPR-S7619
Replaces John Deere RE45458, Sherwood P1711, P1719, P1719-01, P1719F-01, P1719X
Uses JMP Flexible Impeller p/n: 7608-01K
Port Type: 1.75" Flange
Note: Spline Shaft Type
Pump Weight (approx): 13 LBS (5.45 KG)
Replaces Genuine John Deere Pump p/n(s): RE45458
Replaces Sherwood Pump p/n(s): P1719 (Old P1711), P1719-01, P1719F-01, P1719X
For Engine Model(s): 6076AFM, 6076AFM30, 6125AFM01, 6081AFM01, 6081AFM75, 6081AFH75, 6081HFH70
Parts Internally Compatible to Genuine: NO (Changes made to Impeller, Wear Plate, Cam, Mechanical Seal, Shaft for Better Quality & Performance)
|
850.70 |
|
|
Sherwood G-2903X-J Engine Cooling Pump JPR-C1100
Replaces Cummins 3349392, 5260393, 4929178, Sherwood G2903X, G2903-01, G2903-02.
Engine Model QSM11
Uses JMP Impeller p/n: 8359-01K
Port Type: Flange 2"
Replaces Genuine Cummins Pump p/n(s): 3349392, 4929178, 5260393
Replaces Sherwood Pump p/n(s): G2903X, G2903-01, G2903-02
For Engine Model(s): QSM11
Pump Weight (approx): 35.0 LBS (15.91 KG)
Parts Internally Compatible to Genuine: YES
100% Plug & Play Replacement
Heavy Duty Marine Grade Casting
Marine Grade Shaft (3X Series Non-Magnetic)
O-Ring End Cover Packing
Heavy Duty Material for Cam Liner vs Sherwood's Plastic Cam
High Performance Impeller
High Volume Flow Capacity
Fast Flow Capacity
|
1402.33 |
|
|
JMP Marine Volvo Penta Replacement Engine Cooling Seawater Pump
Replaces Volvo Penta 3583115, 3581558, 860629, Johnson 10-24394-01, 10-24524-01
JPR-V1000 JMP Marine Volvo Penta Replacement Engine Cooling Raw Water Pump
Product Information & Specs:
Uses JMP Impeller p/n: 7400-01K
Port Type: 1" Hose
Pump Size (LxWxH): 129mm x 158mm x 90mm
Pump Weight (approx): 6.0 lbs (2.73 kgs)
Replaces Genuine Volvo Penta Pump p/n(s): 3583115 (Old 3581558, 860629)
Replaces Johnson Pump p/n(s): 10-24394-01, 10-24524-01
Engine Model(s): AD31/41/43, TAMD31/41/42, KAD32/42/43/44, KAMD42/43/44, MD31, TMD31/41
Parts Internally Compatible to Genuine: NO
Changes made: Ball Bearing, Screw for Cover, Cam, Screw for Cam, Gasket for Cam, End Cover, Mechanical Seal, O-Ring for End Cover, Oil Seal, Shaft, Small Snap Ring for Better Quality & Peformance
Product Features:
Universal Model
Plug & Play Replacement
Heavy Duty Marine Grade Casting
Marine Grade Shaft (3X Series Non-Magnetic)
Durable Double Ball Bearing
O-Ring Packing
High Performance Flexible Impeller
Mechanical Seal instead of Lip Seal
|
478.69 |
|
|
Gusher® Galley MK3 Service Kit
Service Kit with Complete Set of Serviceable Parts for Whale Gusher® Galley MK3.
Includes:
Small O-ring (2)
Valve (4)
Valve stem (4)
Large O-ring (4)
Self tapping screw (4)
Sealing washer (1)
Diaphragm (2)
|
25.87 |
|
|
Westerbeke JSM0089 MINOR SERVICE KIT for WB08IP
|
88.57 |
|
|
Micropump GJ-N25.FF1S.J-P4 Pump Head I Drive Mt
Micropump GJ-N25.FF1S.J-P4 Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. L25689 constructed of Base Material 316SS, Gear Material PTFE and Shaft Material 316SS.
Micropump L25689 GJ Series Pumphead with Port/fittings 1/4-18 NPT Ports, Max Speed 5500 RPM, Max Pressure 300 psi and Max Temp 54.4444444444444 (C).
Pump Series: GJ Series
Ports/Fittings: 1/4-18 NPT Ports
Min Speed (RPM): 500
Max Speed (RPM): 5500
Max Pressure (psi): 300
Min Temperature (°C): -46
Max Temperature (°C): 54.4444444444444
Max Diff. Pressure (psi): 49.03225806451613
Displacement (ml/rev): 0.91
Design: Standard Design
Gear Set: 0.500/2/24 (0.91ml/rev)
Gear Material: PTFE
Static Seals: PTFE Gasket (.004) 5369
Base Materials: 316SS
Drive Mount: I-Drive® IEG
Bypass: No
Driven: Ferrite
Driving Magnet: I-Drive®, IEG
High System Pressure: No
Bushings: PTFE
Shafts: 316SS
Gear Trim: None
Part Number: L25689
Model: GJ-N25.FF1S.J-P4
|
994.00 |
|
|
Jabsco 29600-1201 Major Rebuild Kit 29600-1201
Contains All Internal Service Parts Except the Shaft
|
472.25 |
|
|
Micropump DG-F61.G1R2P5.J.B I Drive Motor J Mount
Replacement for Micropump I-Drive IEG
J-mount, Speed Control(0-5VDC)
Micropump I-Drive IEG, 0-5 VDC SPEED CONTROL INPUT; J-Mount
|
1649.51 |
|
|
Micropump DG-F61.G1S2P5.J.B I Drive Motor J Mount
Micropump Brushless DC I-Drive
|
1869.44 |
|