31705 Bilge and Shower Drain Pump Bilge/Livewell/General Purpose Diaphragm Pump Features: 12v Self-Priming from dry up to 2.4m (7.8ft) Run dry without damage Smooth flow Four piston, diaphragm pump Powerful heavy duty motor with Thermal Overload Protection Snap-in Ports Waterproof coating Meets USCG Regulation 183.410 and EN ISO 8846 MARINE (Ignition Protection Standards) Meets EN 50081-1 Electro-magnetic Compatiblity Complies with EN ISO 8849 MARINE Electric Bilge Pump WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Par-Max 4 Bilge/Shower Diaphragm Pump - 4.3GPM - 24V Self-priming diaphragm pump 24V DC. Features: Connections: - for 19mm (¾”) bore hose Dimensions: - 248mm long, 106mm wide, 100mm high Fuse Size: - 10(amp) Output: - up to 16 litres/minute (3.5 gallons/minute). Maximum recommended total head 4m For bilge pumping or Livewell circulation Continuously rated motor with thermal overload protection Multiple diaphragm design allows extended dry running Self-primes up to 2.5m vertical lift Jabsco ‘Pump Guard’ strainer included with pump Packaged Dimensions: L:17.00 x H:11.00 x W:34.00cm Actual Weight: 2.91 Kg  (Approx. 3.41 Kg packed) WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Par-Max Shower Drain/General Purpose Pump - 3.5GPM-25psi-12VDC with Strainer Long-life fully serviceable shower drain pump. Features: 3.5 GPM (13.2 lpm) at 3ft (1m) head Self-priming up to 10ft (3m) allows mounting above wet bilges Diaphragm design allows extended dry running Continuous rated, heavy duty motor sealed for harsh bilge environments Thermal overload protection automatically stops the motor if it overheats due to overloading, with an auto re-start feature Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection) ISO 8849 MARINE (Bilge Pump Standard) Complete with Pumpgard Oil resistant elastomers Fitting: Connections for 3/4" (19mm ) ID hose Size: 7.7" long x 4.2" wide x 4.1" high (19.6cm x 10.6cm x 10cm) Weight: 5.0lb (2.1kg) WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Flush Mount Hose Adapter Perfect solution to remove that unsightly hose bib deck fitting and rusty knob. This will enable you to connect your water hose in seconds. Enables you to quick-connect your water hose in seconds. Position this fitting close to your anchor windlass to clean muddy anchors, or locate one on each side of your vessel to make cleanups much easier. Combine the deck washdown fitting with a hose coil washdown hose and keep the deck clutter free. Features: Extra 3/4" GHT male hose adaptor suitable for HoseCoil Water flow available with an easy twist of the fitting Easy to install Position this fitting close to your anchor windlass to clean those muddy anchors. Or locate one on each side of your vessel to make those cleanups much easier Just combine the Quick Release Deck Washdown fitting with a Hose Coil Washdown hose and a high volume Jabsco PAR-Max 4 Washdown pump to keep the deck clutter free Comes with a pre-installed check valve that connects your hose with a simple twist to the deck fitting, even under full pressure

PAR-Max 3 3.5 GPM Water System Pump Shower Drain and General Purpose Pump Features: Self-Priming Runs Dry Without Damage Smooth Flow Four Piston, Diaphragm Sealed Powerful Motor Snap-In Swivel Ports Meets USCG & ISO 8846 Ignition Protection Standards WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Shower Drain and Bilge Pump Robust Single Diaphragm Design Sink & Shower Drain Pump Flow rate: Nominal 16 Litres/min (4.2 US gallons/min) Self-priming from dry up to 3m (10ft) Features: Flexible installation No filter required Compact and simple design Dry running capability Relevant Standards: ISO 8846 MARINE and USCG Regulations for Ignition Protection ISO 8849 MARINE Bilge Pump Standard Built to ISO 15083 Specification Meets BSEN 50081 (Electro Magnetic Compatibility) WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Filterless Bilge/Sink/Shower Drain Pump - 4.2 GPM - 24V Self-priming diaphragm pump 24V DC. Features: Connections: - for 19mm (¾”) bore hose. Dimensions: - 294 mm long, 159mm wide, 132mm high Fuse Size: - 5(amp) Maximum Current: - 2.5(amps) Output - up to 16 litres/minute (3.5 gallons/minute). Maximum recommended total head 6m Robust, quiet single diaphragm design No strainer required Single diaphragm design allows extended dry running Self-primes up to 3m (9.5ft) vertical lift Multi-positional ports for easy mounting Rated for up to 30 minutes of continuous running Actual Weight: 2.98 Kg  (Approx. 3.48 Kg packed) WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Jabsco 50880-1100 24V Shower Drain Pump  

Jabsco Mini Puppy 24V Bilge/Utility FEATURES Pump Body: Brass Port Size: 25.4mm (1") ID Hose or 3/8" BSP / NPT pipe Flow: 6 lpm (1.3 UK gpm) output @ 2m (6.6ft) head. Impeller: Nitrile Shaft Seal: Lip Type Shaft: Stainless Steel Motor: ISO 8846 MARINE (Ignition protection). ISO 8849 MARINE (Bilge pump standard).     APPLICATIONS / CHARACTERISTICS Continuous rated, medium duty pumps for bilge and general purpose use. Small bilge debris present no problem to these brass bodied, flexible impeller pumps. Simple design means fewer wearing parts. Self priming to 1.5m (5 ft      Jabsco Mini Puppy Bilge/Utility 24V 1.4GPM

Jabsco 23670 Series Junior Puppy Flexible Impeller Pump FEATURES Pump Body: Bronze Port Size: 3/8"BSP Threads or 3/4" (19mm) ID Hose. Flow: 15.5 Litres/min (3.4 USgallons/min) Impeller: Nitrile Shaft Seal: Lip Type Shaft: Stainless Steel Motor: Continuous duty 12V or 24V. Motor meets ISO 8846 MARINE (Ignition protection) and ISO 8849 MARINE (Bilge pump standard).     APPLICATIONS / CHARACTERISTICS Continuous rated, medium duty flexible impeller pumps for bilge and general purpose use. Self Priming to 8 feet (2.5m). Small bilge debris present no problem to these bronze bodied, flexible impeller pumps. Simple design means fewer wearing parts. Use for bilge pumping, livewell circulation, washdown and general pumping requirements   Jabsco Junior Puppy Flexible Impeller Pump 12Volt, 3.4GPM, 3/8" British Standard Pipe Threads or 3/4" Hose Ports, Nitrile Impeller  

Waste Water Diaphragm Pump - 22L(5.8GPM) - 24V Single chamber, self priming, diaphragm pump 24V for grey or bilge water. Shower drain, transfer or pump out. Capacity 22 L/min (5,8 GPM), flexible installation with 360 degree rotational ports. Quiet operation and low power consumption. Operates with no need for filter. Including 19mm (3/4″) and 25mm (1″) straight connectors. 2,5A fuse. Interchangeable with Johnson Pump 10-13350-04. Specifications: Weight: 0,8 kg/1Lb Dimensions: 141/5.5L x 105/4H x 140/5.5W mm/in Type: Bilge/grey water *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Jabsco 33760-0000 Hand Bilge Pump   FEATURES Pump Body: Brass Port Size: Inlet: 3/4" Garden Hose, 1/2" Hose or 1" Hose Flow: 7 Strokes/Gallon to 40 Strokes/Gallon Elastomers: Neoprene     APPLICATIONS / CHARACTERISTICS Jabsco hand pumps. Pump more liquid with less effort! They never need coaxing or priming and give full suction on the first stroke. Pumps can be used In any position. Uses include bilge pumping, oil draining, diesel fuel transfer, and many other liquid transfer applications. NOTE: Oil temperature should not exceed 140° F. Long life brass cylinders, high-quality oil resistant plungers, intake and discharge caps are used. Some models include hose(s) or adjustable mounting brackets. Available in two sizes with 1-3/4" and 1-1/4" diameter cylinders.   Jabsco Hand Bilge Pump 1-1/4" Diameter x 17" Long, Intake: Open Ended Pump Body, Discharge: 1/2" Hose Barb, 15 Strokes Per Gallon, with 5' of 1/2" Discharge Hose, No Intake Hose Adapter  

Jabsco 29290-1020 Strainer 3/4" Bilge  

1000 GPH Multi Port Shower Sump Pump 12V with Switch This compact shower sump system is designed to meet the higher demands of today's boating industry where more equipment is used. This also includes the freshwater system onboard and involves showers, dish-washing machines, galley sinks, etc. The shower sump turns on/off automatically using our Ultima switch technology and has multiple inlet ports for handling wastewater from more than one tapping point. The check valve on the outlet stops water from flowing back into the tank. The tank has a tight-fitting lid to minimize splashing and odors. To further aid in cleaning, the system includes an easily removable mesh filter. *CE-Approved Features: Includes the L650 Duo pump and a mesh filter for easy cleaning Multiple inlet ports Handles wastewater from more than one tapping point Tight-fitting lid to minimize splashing and odors Check the valve on the outlet Capacity 1.0 m head (13.6 V/27 V): 53 l/min - 844 GPH Capacity straight (13.6 V/27 V):61 l/min - 972 GPH Amperage: 3.4 A Fuse Size: 5 A Pump Body: Thermoplastic Shaft Seal: Lip seal Voltage: 12 V DC Intake Hoses: 1x3/4", 1x3/4" or 1x1" Discharge Hose: 3/4"

Par-Max 1 Water Pressure Pump - 12V - 1 GPM - 35 PSI HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance.  Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion.  Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.