|
IWAKI 23089, BEARING MOUNT
|
24.10 |
|
|
Micropump CA-I-SFS.A Pump Head A Mount
|
1224.25 |
|
|
|
191.93 |
|
|
Iwaki MD-100RLT, 1 inch MPT in/outlet 1986gph 120v
Iwaki MD-100RLT Water Pump
Mag Drive Centrifugal Pump and Motor Assembly, GFRPP Polypropylene Construction, close coupled to a 1/3 Horsepower, 115 Volts AC, 1 Phase, TEFC Electric Motor. 1 Inch NPT Threaded Port Connections.
Japanese pressure rated flow pump.
1 inch MPT inlet and outlet.
1/3 HP Motor output.
3300 RPM motor speed.
120 volts
3.4 amps.
Max flow 35.6 GPM.
1986 GPH at 6 feet of head.
Max head 39.0 ft.
Max system pressure 25.6 psi.
Twin bearing system handles thrust loads, extends service life
Hollow rotating / internal cooling circuit reduces bearing temperature.
Compact / Quiet energy for easy maintenance.
Few moving parts for easy maintenance
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
Iwaki America Inc. of Holliston, Massachusetts, is a joint venture which grew from a 15 year association between Walchem Corp. of Holliston, MA and Iwaki Co. Ltd. of Tokyo, Japan. Combining Walchems 30 years of chemical injection and control experience with Iwakis 50 years of pump design engineering, Iwaki America offers the best chemical handling equipment for use in Chemical Process, O.E.M., Industrial and Semiconductor applications.
|
748.00 |
|
|
Iwaki WMD-30RLT, 3/4 inch MPT input and outlet 480gph 115v
Iwaki WMD 30RLT Water Pump
Magnetically driven seal-less water pumps for use on fresh or saltwater aquariums.
Iwaki Walchem magnetic drive pumps will run longer, quieter and cooler than any traditional mag drive. Extraordinarily high efficiencies make WMD & MD the clear choice in almost every process, recirculation or transfer application.
The unique internal cooling circuit creates a positive, forced cooling path, lubricating bearing surfaces and actively purging gases & heat. The unique double bearing system allows cooling circuit liquid to continually "wash" front and rear radial bearings, extending bearing life.
Substantially reduced hydraulic noise is a major feature of all WMD/MD impellers. Great pains are taken in the molding/finishing process to eliminate tangential misalignment.
High lubricity fluoropolymer bearings minimize mechanical losses typical of conventional mag drive pumps. High purity SiC radial bearings handle the most aggressive ultrapure chemistries. PTFE front thrust surface aids hydraulic balance and minimizes flashing. Large rear thrust surface guards against axial forces caused by cavitation or gas entrapment.
Dynamically balanced barium ferrite drive magnets provide best magnet torque. Die cast magnet carrier creates a flywheel effect, which adds to the magnet safety factor.
American motor pressure rated water pump.
3/4 inch MPT inlet and outlet.
1/16 HP Motor output.
3150 RPM motor speed.
120 volt
1.00 amps.
Max flow 10.0 GPM.
480 GPH at 6 feet of head.
Max head 17.7 ft.
Max system pressure 11.60 psi.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
339.04 |
|
|
IWAKI 2KBA-3ZBU1, PUMP DOUBLE BELLOWS 100V
Blow-molded polypropylene bellows ensuring even wall thickness for long life
Easy output adjustment, Simple liquid end construction assuring trouble-free pumping
Anti-syphon spring (Hastelloy C) available
Sure-seating elastomeric poppet valves provide positive backflow protection
Optional duckbill valves for slurries
Thermoplastic motor housing, Stainless steel or non-metallic frame
DC motor options available
Addressing the specific requirements of equipment manufacturers, Iwaki America has developed a full line of economical, versatile, OEM and Multiplex pumps featuring rugged gear-motor drives and flexible designs. Proven performers, Iwaki America bellows pumps are extensively used in the photographic, plating and electronics industries.
|
377.52 |
|
|
IWAKI 2KBA-3ZBU2, PUMP DUPLEX BELLOWS
Blow-molded polypropylene bellows ensuring even wall thickness for long life
Easy output adjustment, Simple liquid end construction assuring trouble-free pumping
Anti-syphon spring (Hastelloy C) available
Sure-seating elastomeric poppet valves provide positive backflow protection
Optional duckbill valves for slurries
Thermoplastic motor housing, Stainless steel or non-metallic frame
DC motor options available
Addressing the specific requirements of equipment manufacturers, Iwaki America has developed a full line of economical, versatile, OEM and Multiplex pumps featuring rugged gear-motor drives and flexible designs. Proven performers, Iwaki America bellows pumps are extensively used in the photographic, plating and electronics industries.
|
377.52 |
|
|
IWAKI KBA-3ZBU2, PUMP SINGLE BELLOWS 115V
Addressing the specific requirements of equipment manufacturers, Iwaki America has developed a full line of economical, versatile, OEM and Multiplex pumps featuring rugged gear-motor drives and flexible designs. Proven performers, Iwaki America bellows pumps are extensively used in the photographic, plating and electronics industries.
Blow-molded polypropylene bellows ensuring even wall thickness for long life
Easy output adjustment, Simple liquid end construction assuring trouble-free pumping
Anti-syphon spring (Hastelloy C) available
Sure-seating elastomeric poppet valves provide positive backflow protection
Optional duckbill valves for slurries
Thermoplastic motor housing, Stainless steel or non-metallic frame
DC motor options available
|
245.44 |
|
|
Iwaki MD-70RLZT, 3/4 inch MPT in/outlet 684gph 220v
Iwaki MD-70RLZT Water Pump
Japanese made high pressure rated pump.
3/4 inch MPT inlet and outlet.
2/7 HP Motor output.
3400 RPM motor speed.
220 Volt
1.90 amps.
Max flow 11.4 GPM.
684 GPH
Max head 66.6 ft.
Max system pressure 42.7 psi.
Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
Iwaki America Inc. of Holliston, Massachusetts, is a joint venture which grew from a 15 year association between Walchem Corp. of Holliston, MA and Iwaki Co. Ltd. of Tokyo, Japan. Combining Walchems 30 years of chemical injection and control experience with Iwakis 50 years of pump design engineering, Iwaki America offers the best chemical handling equipment for use in Chemical Process, O.E.M., Industrial and Semiconductor applications.
|
693.00 |
|
|
IWAKI 23090, ASI CLEANLINE BEARING
|
11.48 |
|
|
IWAKI G0020, BEARING FOR GX-15 SIC
|
413.27 |
|
|
IWAKI MD-15R-230GS, PUMP POLY 1/2 230V CE
Magnetic Drive Centrifugal Pump and Motor Assembly, GFRPP Polypropylene Construction, close coupled to a 1/75 Horsepower, 230 Volts AC, 1 Phase Electric Motor. 1/2 Inch Hose Barb Port Connections.
Features
• Twin bearing system handles thrust loads, extends service life
• Hollow rotating / Internal cooling circuit reduces bearing temperature
• Compact / Quiet energy efficient design
• Few moving parts for easy maintenance.
|
265.20 |
|
|
IWAKI SMX-220CAVYU 1X1 SMX POLYPROPLENE PUMP LESS MOTOR
Pump Body:
GFRPP- Glass Fiber Reinforced Polypropylene.
Self-Priming to 13 Feet Maximum For Water.
Port Size:
1" Flanged Inlet and Outlet Ports.
Flow:
Up to 25 GPM (at zero pressure). 2.6 GPM Minimum Flow.
Pressure:
Standard Operating Point is 21GPM at 22 Feet of Head.
Impeller:
GFRPP- Glass Fiber Reinforced Polypropylene.
Shaft Seal:
No Seals On Mag Drive Pumps, FKM (Viton) Body O-Ring, EPDM Optional.
Shaft:
Alumina Ceramic Spindle.
Wetted Bearing
Materials:
Carbon Impeller to Shaft Bearing.
Alumina Ceramic Liner Ring.
PTFE Mouth Ring.
CFRPPS Rear Thrust Ring.
Motor:
Not Included. Requires Up To 1/2HP, 60Hz, 3450 RPM, 56C Frame Motor.
|
1387.20 |
|
|
IWAKI WMD-30RZT-220 PUMP 220V HI PRESSURE
Impeller:GFRPP Polypropylene
Ports:3/4 Inch NPT Threaded
Motor:1/16 Horsepower, 220 Volts AC, , 1 Phase
FEATURES
Pump Body: GFRPP Polypropylene
Impeller:GFRPP Polypropylene
Ports: 3/4 Inch NPT Threaded
Motor: 1/16 Horsepower, 220 Volts AC, , 1 Phase
Features:
• Twin bearing system handles thrust loads, extends service life
• Hollow rotating spindle/internal cooling circuit reduces bearing temperature
• Compact design
• Quiet energy efficient design
• Few moving parts for easy maintenance
|
412.88 |
|
|
Iwaki LKN45A-S6, Metering Pump 15.9gph
Iwaki motor-driven 15.9 gph metering pump features 225 psi maximum pressure and has voltage rating of 115/230 VAC
The LK series metering pump is the largest in the high performance line of pumps from Walchem. The LK is a motor-driven, mechanically actuated diaphragm metering pump with a maximum capacity of 114 GPH and a maximum pressure of 225 PSI. The heart of the LK is a compact and very reliable dual-cam system drive and worm gear reducer. Roller bearings and oil bath lubrication ensure outstanding durability and wear resistance in continuous operation. The LK series is ideal for chemical feed applications in a wide range of fields, including water treatment, chemical process, agriculture, mining and paper.
|
3350.64 |
|