|
Ember E1150Z Snap-In - Polished Chrome - Round - Red Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Polished Chrome - Square - Red Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Polished Chrome - Round - Cool White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Polished Chrome - Round - Warm White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Brushed Nickel - Round - Red Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Polished Chrome - Oval - Warm White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Polished Chrome - Square - Cool White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Polished Chrome - Square - Warm White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Brushed Nickel - Square - Red Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Brushed Nickel - Round - Warm White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Brushed Nickel - Round - Cool White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Brushed Nickel - Square - Cool White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Ember E1150Z Snap-In - Brushed Nickel - Square - Warm White Light
Product Highlights:
2.5 watts
9-30V DC input/9-15 AC Input
0 to 100% Dimming
Stainless Steel Construction
Asymmetric Light Distribution
Wide lateral angle
6 Vibrant Color Options
IP67, Exterior Rated
Up to 50,000 Hours of Operation
Features:
Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
Fixture accomodates wall thicknesses ranging from .125" to .625"
Exclusive Technology:
SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
No external drivers are required and wiring is made simple
AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces
|
61.46 |
|
|
Exuma Courtesy Light - Polished Stainless Housing - Red Light
Small, attractive and discreet, Exuma lights offer more light output than many 'full size' overhead lights. Measuring about 1" in diameter or less Exuma is clean, almost flush, and easy to install. Fully water sealed and IP67 compliant Exuma is surface mountable and fits almost anywhere, perfect for interior or exterior installations.
Features:
Lumens: N/A
Voltage: 10-16V DC
12V DC Amps: 45mA
24V DC Amps: N/A
Rated Watts: 0.55
CCT: 5000
CRI: 70+
Op. Temp F/C: -31°F/35°C to + 131°F/55°C
Timed Toggled Protocol (TTP): No
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: 3/32"
Length: N/A
Width: N/A
Depth: 0.44" (1.13cm)
Diameter: 0.98" (2.48cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.92 |
|
|
Apeiron A3101Z 2.5W Screw Mount Light - Warm White - Polished Chrome Finish
Since its introduction nearly a decade ago, Apeiron is the undisputed go-to marine LED down light. Apeiron fixtures offer the perfect blend of technical sophistication and elegance. The unique screw mount provides a removable bezel, as well as a reduced mounting depth for tighter mounting areas.
Rugged & Waterproof
With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*.
*IP67 rated. Not for use in submersible applications.
Features:
Screw Mount - Removable bezel
Use your existing wiring and switch
Multiple color options - 1 fixture
Simple 2 wire hookup
3.50" Round
1.34" Deep
LED
Marine Grade
Refit friendly
Power: 2.5W
Beam Angle: 90°
Typical Applications:
Hardtop
Arch
Cockpit
Courtesy
Pilot House
|
92.20 |
|