|
Hypro 1542P-65Sp, Pump-5 Vane 6.5Hp Ge
|
519.48 |
|
|
Hypro 9303S-HM1C Centrifugal Pump w/Hyd Motor
114 gpm, 130 psi. Max Hydraulic 13 gpm. For Open/Closed Systems 1-1/2" NPT inlet, 1-1/4" NPT outlet.
Hypro 9303S-HM1C Centrifugal Pump.
Hypro centrifugal pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids: water, insecticides, herbicides, wettable powders, emulsives, liquid fertilizers, etc.
Hypro Series 9300 hydraulic motor-driven centrifugal pumps provide smooth performance. They can be conveniently mounted on the tractor or sprayer, becoming part of the vehicle’s hydraulic system and freeing the PTO for other uses. The Hypro “close-coupled” design reduces the mounting space required, eliminating long shafts and couplers between the pump and motor.
The broad, versatile line includes models with rugged housings of cast iron and stainless steel that stand up to strong chemical herbicides. Stainless steel pumps are ideal for use with Roundup® or other acid applications.
The series includes models 9303C-HM1C, 9303S-HM1C, 9303C-HM2C, 9303S-HM2C, 9303C-HM3C, 9303S-HM3C, 9303C-HM4C, 9303S-HM4C, 9303C-HM5C, and 9303S-HM5C.
|
2235.90 |
|
|
Hypro 3430-0334, Kit Repair (9000)
Hypro Seal & O-Ring Repair Kit for 9000C-O & 9000C-O-SP Series Pumps (3430-0334)
Fits the following pumps:
9006C-O, 9008C-O, 9016C-O, 9018C-O, 9028C-O, 9006C-O-SP, 9016C-O-SP, 9028C-O-SP
|
54.99 |
|
|
Hypro 9910-180101, O'Ring
Hypro 9910-180101 fits these unit(s):
Hypro Pump 9910-D30
Hypro Pump 9910-D30AP-A
Hypro Pump 9910-D30GRGI
Hypro Pump 9910-B-GRGI
(Required 2 for unit use)
|
1.69 |
|
|
Hypro 9910-D403GRGI, 10.6 Gpm 580 Psi Pump W/Gear
Hypro medium pressure diaphragm pumps are recommended for spraying herbicides, pesticides, liquid fertilizers, and many other hard-to-handle fluids.
Features:
Max flow: 10.6 gpm
Max pressure: 580 psi
Port sizes: 1" HB inlet, 1/2" HB outlet
Gearbox and pressure regulator allow for the pump to be connected to a gas engine
|
1649.63 |
|
|
HYPRO 0402-9100P, IMPELLER FOR 9303S SERIES PUMPS
POLYPROPYLENE STANDARD
|
56.78 |
|
|
Hypro 1320-0076, Roller Pump Kit PTO Adapter
Roller Pump Kit Features
Hypro 1320-0076 Shaft Adapter
1-3/8" ( 6 splines) PTO US, 34.9mm (6 splines) PTO Metric
5/16" Pump End US, 23.8mm Pump End Metric
Forged Steel Material
540 RPM
1500, 1700, 7560, 7700 Pump Model
|
57.55 |
|
|
Hypro 1320-0081, ROLLER PUMP KIT PTO ADAPTER
Adapter adapts solid shaft to 1-3/8" 6-spline PTO hollow shaft includes set screws
Replacement for: 5206C; 5210C
Roller Pump Kit Features
Hypro 1320-0081 PTO Shaft Adapter
1-3/8" ( 6 splines) PTO US, 34.9mm (6 splines) PTO Metric
1" Pump End US, 34.9 mm Pump End Metric
Forged Steel Material
540 RPM
|
83.50 |
|
|
Hypro 3390-0062D Unloader Valve 3 Port
3390-0062D Unloader Valve - 3 Port. Works with 5300 Series pumps.
5 gpm, 200-600 psi
3/8" MNPT Inlet and Outlet, 1/4" FNPT Bypass
|
156.31 |
|
|
Hypro 3390-0063D Unloader Valve 3 Port
3390-0063D Unloader Valve - 3 Port. Works with 5300 Series pumps.
5 gpm, 400-1000 psi
3/8" MNPT Inlet and Outlet, 1/4" FNPT Bypass
|
188.68 |
|
|
Hypro 7560N Pump Assy
Ni-Resist 8-Roller Pump w/ Super Rollers, Super Rotor, Viton Seals, 20.1 GPM, 300PSI, 1000RPM, 3/4" NPT, 15/16" Shaft
Performance Information
Max. flow: 12 gpm/45.4 lpm at 540 rpm
Max. flow: 22.5 gpm/85.2 lpm at 1000 rpm
Max. pressure: continuous 100 psi/6.9 bar
Max. pressure: intermittent 300 psi/20.7 bar
Max. rated speed: 1000 rpm
Max. fluid temperature: 140°F/60°C
Other Attributes
Rollers: Super Rollers standard (Poly, Teflon and Buna-N available)
Housing: Cast Iron, Ni-Resist or Silvercast
Port sizes: 3⁄4" NPT
Shaft: 15⁄16" solid
Shaft rotation: CW
1" hose barb inlet fitting for 1000 rpm operation
Shaft Seals: Viton standard (Buna-N available)
Available PTO adapters
Rotor: Cast Iron, Ni-Resist and Silvercast
Recommended PTO torque arm kit 3430-0540
|
626.98 |
|
|
Hypro 9910-DBA160, 4 Diaphragm High Flow Pump
Diaphragm Pump with 1-1/2" HB Inlet x 3/4" HB Outlet
MaterialPolypropylene
Pump Series9910-DBA160
Gasket MaterialDesmopan
Inlet1-1/2" HB
Outlet3/4" HB
Maximum (RPM)550
Maximum Temperature (F°)140
Maximum Flow Rate (GPM)39.6
Maximum Pressure (PSI)725
|
3009.96 |
|
|
BURKS 350CS9M-FE, TURBINE PUMP 230/460v 3PH 5HP
Turbine Pump and Motor unit.
Bronze Fitted Cast Iron Construction.
Close Coupled to a 5 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
OEM version with FE Franklin Electric Motor.
|
4474.65 |
|
|
Little Giant Pump 584604
Little Giant TE-5-MD-HC Magnetic Drive Pump
Motor 115/230 Volt 50/60 Hz 1/8 HP Totally Enclosed Fan Cooled Motor, 1200 GPH at 1 Foot Head, Shutoff Head 29.3 Feet, Inlet: 1" FNPT, Outlet: 1/2" MNPT, Ryton Body, Fluid Temperature Up to 200F (93C), UR/C-CSA Listed, 6 Foot Power Cord- Not Installed
584604 Magnetically driven pumps for circulation of highly corrosive acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other highly corrosive chemicals and solutions. The MD-HC Series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use
|
1132.56 |
|
|
Little Giant Pump 584504
Little Giant TE-5-MD-SC Magnetic Drive Pump
Motor 115/230 Volt 50/60 Hz 1/8 HP Totally Enclosed Fan Cooled Motor, 1200 GPH at 1 Foot Head, Shutoff Head 29.3 Feet, Inlet: 1" FNPT, Outlet: 1/2" MNPT, Polypropylene Body, Fluid Temperature Up to 150F (66C), UR/C-CSA Listed, 6 Foot Power Cord- Not Installed
584504 Magnetically driven pumps for semi-corrosive chemicals and solutions. The MD-SC Series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use.
|
1029.60 |
|